PUBLICATIONS
Assessment of the activities of scavengers and their economic impacts in waste recovery in Warri met ...
Journal: International Research Journal of Public and Environmental Health, 2017
Author: Asibor Godwin, Edjere Oghenekohwiroro
Anthropometric survey of Nigeria adult working class
Journal: Nigerian Journal of Engineering Management, 2002
Author: IGBOANUGO, A.C., EGHAREVBA, F, and IBHADODE A.O.A
Evaluation of Pure Aluminium Inoculated with Varying Grain Sizes of an Agro-waste based Inoculant
Journal: Advances in Science, Technology and Engineering Systems Journal (ASTESJ), 2017
Author: Adeyemi I. Olabisi, Thankgod E. Boye, Emagbetere Eyere
Alkaline Phosphate Level Activity in Crude oil Contaminated Soil Bio remediated with natural sources
Journal: journal of Engineering and Applied Scientific Research, 2014
Author: Akpoturi P.E
The Effects of Agricultural Activities on the Environment in Keffi, Nasarawa State, Nigeria..
Journal: International Journal of Pure and Applied Sciences. , 2010
Author: Onosemuode, C Adesina Damilola and Okhae, S.E.
Assessment of the Impacts of Refinery Effluent on the Physico-chemical Properties of Ubeji Creek, De ...
Journal: Journal of Environmental Analytical Toxicology , 2017
Author: Eunice OE, Frank O, Voke U, Godwin A
Numerical Investigation of Thermo-Mechanical Behaviour of Ball Grid Array Solder Joint at High Tempe ...
Journal: ADVANCED MATERIALS RESEARCH -ZUG-, 2012
Author: Amalu, E.H. / Ekere, N.N. / Bhatti, R.S. / Mallik, S. / Takyi, G. / Ibhadode, A.O.A.
DETERMINATION OF NI(II) CRYSTAL STRUCTURE BY POWDER X-RAY DIFFRACTION
Journal: Scientia Africana, 2015
Author: J. I. Mbonu
Estimation of Pressure Drop, Liquid Holdup and Flow Pattern in a Two Phase Vertical Flow
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Omon E., Dulu A. and Okotie S.
Assessing mechanical properties of natural fibre reinforced composites for engineering applications ...
Journal: Journal of Minerals and Materials Characterization and Engineering, 2012
Author: Samuel, O.D., Agbo, S. and Adekanye, T.A.
Introduction to Manufacturing Technology
Journal: Open Journal of Energy Efficiency, 2013
Author: Mala Abba-Aji, Vincent Ogwagwu, Bukar Umar Musa, Prof. A.O. Akii Ibhadode (Contributor)
The Design of a Linear Quadratic Optimal Regulator for Transient Heat flow in Continuous Casting of ...
Journal: International Journal of Current Research, 2016
Author: Obinabo E. C. Izelu C. O. Nwaoha T. C. and Ashiedu F. I.
Some physical and mechanical properties of asbestosfree experimental brake pad
Journal: JOURNAL OF RAW MATERIALS RESEARCH , 2006
Author: I M. Dagwa, A. O. A. Ibhadode
Development of Asbestos-Free Automotive Brake Pad Using Ternary Agro-Waste Fillers
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: Adeyemi, I. Olabisi, Nuhu, A. Ademoh, Thankgod E. Boye
Integrating and Forecasting Power output in Renewable Energy power Plants via Computer Networking
Journal: nternational Journal of Emerging Sciences, 2012
Author: O.D. Samuel, Frank Onaifo, W.O. Igbabini
Delineating the Proper Shooting Medium for Seismic Reflection Survey in the Greater Ughelli Depobelt ...
Journal: Geophysics Remote Sensing, 2014
Author: Alaminiokuma, G. I. and Emudianughe, J. E.
Assessment of the Problems Militating Against Tourism Development in Delta State, Nigeria.
Journal: Confluence Journal of Environmental Studies, 2006
Author: Onosemuode, C and Usideme, P.O (2006)
The Design of a Manual Table-Top Grinder,
Journal: Scholars Journal of Engineering and Technology,, 2014
Author: Abdulmalik, I.O., Michael, A., Akonyi, N.S., Mgbemena, C.O., Aaron-Orsu, C.J Ambali, A.O.
Finite Element Analysis and Design Validation of High Pressure Gate Valve for a Typical Nigerian Oil ...
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: ThankGod E. Boye, Thaddeus C. Nwaoha, Adeyemi I. Olabisi
Shot Configuration Suitable for Optimizing Foldage and Offset around Areas with Non-Seismic Objects
Journal: AMERICAN JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH, 2013
Author: G. I. Alaminiokuma and D. O. Ogagarue
High Power Picosecond Laser Surface Micro-texturing of H13 Tool Steel and Pattern Replication onto A ...
Journal: Lasers in Manufacturing and Materials Processing, 2016
Author: Otanocha, O.B., Li, L., Zhong, S. and Liu, Z
Use of inequalities in the determination of control systems compensation parameters
Journal: Advances in Modeling Analysis C. AMSE Press, 1993
Author: IBHADODE, A.O.A
Impact of biologically treated effluent on the physico-chemical quality of a receiving stream in Ile ...
Journal: Journal of Sustainable Development, 2015
Author: Asibor, G., Edjere, O. and Adeniyi, I. F.
Phase-based neuron training using evolutionary algorithms.
Journal: Fundamentals of Electrical Engineering (ISFEE), 2014 International Symposium, 2014
Author: Sorin Laureniu Stnescu Omonigho Benedict Otanocha
Towards an Enhanced Product Line Engineering Process Model
Journal: Benin Journal of Advances in Computer Science, 2019
Author: Oyemade, D. A, Onibere, E. A.
Thermal stability of pulverized palm kernel shell (PKS) based friction lining material locally deve ...
Journal: ChemXpress , 2014
Author: Mgbemena, C.O., Mgbemena, C.E. Okwu, M.O.
On the realization of the Equilibrium State of FluidBorne Marine Vessels
Journal: International Journal of Science and Technology (IJST) , 2016
Author: Obinabo E. C., Nwaoha T. C. and Ashiedu F. I.
Modeling Hyperelastic Behavior of Natural Rubber/Organomodified Kaolin Composites Oleochemically Der ...
Journal: Journal of Scientific Research Reports, , 2014
Author: Ihueze,C.C Mgbemena,C.O.
Environmental Pollution from Port Harcourt Refinery - A System Approach
Journal: journal of Engineering and Environmental Studies, 2006
Author: Akpoturi P.E
A Contingent Claim Approach to Bank Valuation
Journal: Journal of Mathematical Finance, 2014
Author: Enahoro Alfred Owoloko, Nicholas Amienwan Omoregbe, Michael Akindele Okedoye
Optimal Reliability and Cost of Power Distribution: A case of Power Holding Company of Nigeria.
Journal: International Journal of Engineering Science and Technology, , 2011
Author: Chinwuko, E.C., Nwuba, E.I.U., Mgbemena, C.O.
Simulation and experimental verification of completely closed cavity die forging on a mechanical pre ...
Journal: Proc. Institution of Mechanical Engineers, 1989
Author: IBHADODE, A.O.A. and DEAN, T.A
Optimisation of Alkaline Ethanolysis of Biodiesel Yield from Nigerian Coconut Oil using One Variable ...
Journal: Journal of Energy and Natural Resource Management, 2014
Author: Samuel O.D., Okwu M. O., Oreko U.O., Amosun S. T.
Optimizing the Output Current for a DC-DC Converter
Journal: Journal of Control Theory and Informatics, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles, ONYAN AARON OKIEMUTE
Application of Vertical Electrical Sounding to estimate aquifer characteristics of Ihiala and its en ...
Journal: ARPN Journal of Earth Sciences, , 2016
Author: 1. Obiajulu, O.O., Okpoko, E.I. Mgbemena, C.O.
Fluorine and Chlorine in granitic rocks from Jos Bukuru Complex, Central Nigeria.
Journal: African Jour. Science and technology, 1989
Author: Imeokparia, E.G
Anti-pseudomonas activity of organic acids produced by lactic acid bacteria
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2014
Author: Beatrice Folawe Okorhi
Antimicrobial activity of chemical bioactive compounds from the chloroform extract of the aerial par ...
Journal: International Journal of Biological and Chemical Sciences, 2016
Author: Christiana Ene OGWUCHE and Oghenekohwiroro EDJERE
Utilization of Nigerian precious Resource in the Niger Delta Region for the benefit of the Ecosystem ...
Journal: International Journal of Engineering and Technology (IJET), 2014
Author: Okotie Sylvester and Ikporo Bibobra
Influence of Thermal cycling on the fatigue resistance of Medium Carbon Steel.
Journal: Open Journal of Advanced Engineering Techniques,, 2013
Author: Orumwense, F.F.O., Agbadua, S.A., Mgbemena, C.O., Ubani, N.O.
Geospatial Assessment Of Vulnerable Areas To Flood Hazard and Risk Along Ikpoba River, Benin Edo S ...
Journal: The Nigerian Journal of Cartography and GIS. , 2014
Author: Onosemuode C. and Ovririe E
Integration and Analysis of Unstructured Data for Decision Making: Text Analytics Approach
Journal: International Journal of Open Information Technologies, 2016
Author: Orobor Anderson Ise
Determination of the optimum mix of sawdust and coal dust as a fue
Journal: Technical Transactions of the Nigerian Institution of Production Engineers,, 2000
Author: OSARENMWINDA, J.O. and IBHADODE, A.O.A.
Sorption of Mn(II) ions from wastewater using dried and blended water hyacinth (Eichhornia crassipes ...
Journal: Journal of the Turkish Chemical Society Section A: Chemistry,, 2024
Author: Tesi, G.O., Ejeromedoghene, O., Kpomah, B. and Ipeaiyeda, A.R.
A Regression Analysis Approach to Queueing System Modelling: A Case of Banks.
Journal: Journal of Applied Sciences Research,, 2011
Author: Mgbemena, C.E., Mgbemena, C.O., Chinwuko, C.E.
Optimization of Nigerian Restaurant Waste Cooking Biodiesel Reaction Parameters using Response Surfa ...
Journal: International Journal of Energy Optimization and Engineering, 2014
Author: Waheed, M.A., Samuel, O.D., Bolaji, B.O. and Dairo, O.U.
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: IJETAE , 2013
Author: C.O Izelu, Eze S.C, B.U. Oreko and Edward B.A.
Preliminary study on antimicrobial activity of friendly bacteria isolated from dairy products: Prel ...
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2005
Author: OKORHI F. BEATRICE AND ATAIKIRU TEGA
An Optimized Input Genetic Algorithm Model for the Financial Market
Journal: International Journal of Innovative Science, Engineering Technology, 2021
Author: David Ademola Oyemade, Arnold Adimabua Ojugo
Predictive Model for Cement Clinker Quality Parameters
Journal: Journal of Materials Science and Chemical Engineering., 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi