PUBLICATIONS
Effects of Process Variables on the Fermentation of Corn Stover: A Review
Journal: Journal of Scientific and Engineering Research, 2016
Author: Ohimor E. Onoghwarite, Ndirika V.I. Obiora, Eke A. Ben
Predicting Reservoir Behavior using Mathematical Models 3 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
Effects of breadfruit seed hull ash on the microstructures and properties of AlSiFe alloy/breadfruit ...
Journal: Elsevier Science Direct- Results in Physics, 2012
Author: lC.U.Atuanya A.O.A.Ibhadode.M.Dagwa
Towards a Unified University Information System: Bridging the Gap of Data Interoperability
Journal: American Journal of Software Engineering, 2014
Author: Orobor Anderson Ise
Design of composite dies by the die expansion method
Journal: Technical Transactions of the Nigerian Society of Engineers, 1999
Author: IBHADODE, A.O.A
Assessment of the Impacts of Industrialization in Esan Land, Edo State, Nigeria
Journal: Continental Journal of Environmental Design and Management , 2012
Author: Akhimien F.O, Onosemuode C and Ibhadode C
Evaluation of the Levels of Phthalate Ester Plasticizers in Surface Water of Ethiope River System, N ...
Journal: Journal of Applied Sciences and Environmental Management, 2016
Author: Edjere, O., Asibor, I.G. and Otolo, S.E.
An Investigation of Predictability of Traders Profitability Using Deep Learning
Journal: American Journal of Computer Science and Technology, 2024
Author: David Ademola Oyemade, Eseoghene Ben-Iwhiwhu
Enabling a Viable Technique for the Optimization of LNG Carrier Cargo Operations
Journal: Journal of Marine Science and Application, 2016
Author: Onakoya Rasheed Alaba T. C. Nwaoha and M. O. Okwu
Development of water hyacinth briquetting machine
Journal: International Journal of Scientific Research in Information Systems and Engineering (IJSRISE), 2016
Author: Modestus Okwu, Adeyemi I. Olabisi, ThankGod E. Boye, Ezurike O. Benjamin
Hyperelastic modelling and limit stress prediction of a P195/55 R16 85H Radial tire developed from N ...
Journal: American Journal of Material Sciences and Applications., 2014
Author: Ihueze, C.C, Mgbemena, C.O.
Electricity Generation and Distribution in Nigeria: Technical Issues and Solutions.
Journal: International Journal of Engineering Science and Technology, 2011
Author: Chinwuko, E.C., Mgbemena, C.O., Ebhota, S.W Nwuba, E.I.U.
Study on the Corrosive Nature of Soil PhysicoChemical Characteristics Toward Pipelines in Oil Produc ...
Journal: Asian Soil Research Journal, 2022
Author: Eunice Asiboroko Odesiri-Eruteyan a, Okorhi Folawe Beatrice and Ogwuche Christiana Ene
Predictive Model for Cement Clinker Quality Parameters
Journal: Journal of Materials Science and Chemical Engineering., 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Development of useful products from agro-waste and polythene bags
Journal: Conference on New Products and Technologies for Small and Medium Enterprises,, 2001
Author: IBHADODE, A.O.A
ANALYSIS OF COCONUT ETHYL ESTER (BIODIESEL) AND FOSSIL DIESEL BLENDING: PROPERTIES AND CORROSION CHA ...
Journal: Nigerian Journal of Technology, 2016
Author: Samuel, O. D., Ashiedu, F. I., Oreko, B. U
APPLICATION OF CASSAVA PEELS ACTIVATED CARBON IN THE TREATMENT OF OIL REFINERY WASTEWATER A COMPARA ...
Journal: Journal of Ecological Engineering, 2016
Author: Kigho Moses Oghenejoboh, Smith Orode Otuagoma, Evuensiri Onogwharite Ohimor
Integration and Analysis of Unstructured Data for Decision Making: Text Analytics Approach
Journal: International Journal of Open Information Technologies, 2016
Author: Orobor Anderson Ise
Development of a Production Mould for Casting Single - Cylinder Engine Pistons
Journal: ADVANCED MATERIALS RESEARCH -ZUG, 2007
Author: Zhengwuvi, L. B. / Ibhadode, A. O.A.
Hydrocarbon Biodegradation and Antibiotic Sensitivity of Microorganisms isolated from an oil pollute ...
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2020
Author: Ataikiru T.L, Okorhi F.B and Onyegbunwa A.E
Development of a Reflectance Photoplethysmogram Based Heart Rate Monitoring Device
Journal: International Journal of Medical Imaging, 2017
Author: Kingsley Okeoghene Enalume, Ayebatonye Marttyns Epemu
DISTRIBUTION OF PHTHALATE ESTERS IN UNDERGROUND WATER FROM POWER TRANSMISSION SITES IN WARRI METROPO ...
Journal: Journal of applied science and environmental management, 2016
Author: EDJERE, O ASIBOR, IG BASSEY, U
Developments in the Measurement and Estimation Methods for Cement Clinker Quality Parameters
Journal: International Journal of Engineering Research Technology (IJERT), 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Corrosion Rates and its Impact on Mild Steel in Some Selected Environments.
Journal: Journal of Scientific and Engineering Research., 2016
Author: Umeozokwere, A. O., Mbabuike I.U., Oreko B.U, and Ezemuo, D.T.
Technical Properties of Some Plant Fibres Compared with Glass Fibre
Journal: International Journal of Engineering Research in Africa, 2010
Author: M. Sumaila, A.O. Akii Ibhadode
Development of Asbestos-Free Automotive Brake Pad Using Ternary Agro-Waste Fillers
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: Adeyemi, I. Olabisi, Nuhu, A. Ademoh, Thankgod E. Boye
UNSTEADY MHD MIXED CONVECTION FLOW PAST AN OSCILLATING PLATE WITH HEAT SOURCE/SINK
Journal: Journal of Naval Architecture and Marine Engineering, 2014
Author: A. M. Okedoye
Introduction to Manufacturing Technology
Journal: Open Journal of Energy Efficiency, 2013
Author: Mala Abba-Aji, Vincent Ogwagwu, Bukar Umar Musa, Prof. A.O. Akii Ibhadode (Contributor)
A Multivariate linear Regression Theoretic Approach to Modelling Road Traffic Accidents in Nigeria.
Journal: Journal of the Nigeria Association of Mathematical Physics., 2016
Author: B.U. Oreko, S. Okiy, C.C. Nwobi-Okoye and A.C Igboanugo
The Effect of Calcium Carbonate at Low Volume Fractions On the Mechanical Properties of Polypropylen ...
Journal: Journal of Engineering and Applied Sciences, , 2010
Author: Mgbemena, C.O., Ubani, N.O., Mgbemena, C.E.
Contextualization of Entrepreneurial Education in Production Engineering Discipline
Journal: Journal of Emerging Trends in Education and Policy Studies (JETERAPS) , 2011
Author: Igboanugo Anthony C. and Ashiedu Festus
The Effect of Billet Location on Completely Closed Cavity Die Forging
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
Bioethanol production from corn stover using Saccharomyces cerevisiae
Journal: International Journal of Scientific Engineering Research, 2016
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora, Eke Akachukwu Ben and Nsidibe-Obong Ekpe Moses
Diamond Bit Selection for Horizontal Wells
Journal: journal of Engineering Research and Sustainable Development, 2009
Author: Akpoturi Peters and Onwuachi- Iheagwara P .N
A Hybridized Analytic Model for the Formation of Student Groups
Journal: International Journal of Innovative Science, Engineering Technology, 2021
Author: David Enebeli, David Ademola Oyemade
Solar Hydrogen Fuel Cell Technology, Principle, Applications and Market
Journal: Journal of Energy Technologies and Policy, International Institute for Science, Technology and Education, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles and Onyan Aaron Okiemute
Risering of a Four-Cavity Die Production Mould by Convectional Method
Journal: Advanced Materials Research, 1994
Author: Prof. A.O. Akii Ibhadode, A.I. Igbafe and B.U. Anyata
Investigations into the Applications of Ergonomics Principles in the Design of School Furniture in N ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences, 2013
Author: Ashiedu F. I. and Amiebenomon, S. O.
Design of a PV-Connected DC-DC Converter
Journal: International Journal of Emerging Trends in Engineering and Development, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
KINETIC MODELING FOR REMOVAL OF Pb, Cd, Ni, and Cr ions FROM PETROCHEMICAL EFFLUENT USING TERMITE SO ...
Journal: International Journal of Sciences, 2016
Author: I. E. Agbozu and U. Bassey
Investigating the Calibration Curves for a Two Component Cutting Tool Lathe Dynamometer Using Finite ...
Journal: International Journal of Engineering Research in Africa, 2010
Author: Osezua Obehi Ibhadode, Ishaya Musa Dagwa, Akii Okonigbon Akhaehomen Ibhadode
Characterization of Kaolin intercalates of Oleochemicals derived from Rubber Seed (Hevea brasiliensi ...
Journal: Journal of King Saud University-Science, 2013
Author: Mgbemena, C.O., Ibekwe, N.O., Mohamed, A.P., Menon, A.R.R. Sukumar, R.
Assessment of Household Energy Utilized for Cooking in Ikeja, Lagos State, Nigeria.
Journal: Nigeria Journal of Technology, NIJOTECH., 2016
Author: E. Emagbetere, J. Odia and Oreko, B.U.
Evaluation of Phthalates Contents and Their Health Effects in Consumed Sachet Water Brands in Delta ...
Journal: International Journal of Biological, Biomolecular, Agricultural, Food and Biotechnological Engineering, 2016
Author: Edjere, O., Asibor, G. and Bassey, U.
Static Analysis of a P195/55 R16 85H Radial Tire Developed from Natural rubber/Tea Seed Oil (Camelli ...
Journal: American Journal of Mechanical Engineering and Automation,, 2014
Author: Ihueze, C.C Mgbemena, C.O.
The shere igneous complex central Nigeria. Geochemical constraints on the origin of peralkaline and ...
Journal: Geologie en Mujinbow, 1990
Author: Imeokparia, E.G., and Badejoko, T.A. 1990
Using factor Cluster analysis and enrichment methods to evaluate impact of cement production on str ...
Journal: Advances in Applied Science Research, 2011
Author: Ameh, E.G., Kolawole, M.S. and Imeokparia, E.G.
An Object Selection Model for a 3D Gamming Environment
Journal: IEEE African Journal of Computing ICT, 2015
Author: Allenotor, D., Ojugo, A. Oyemade, D.
EVALUATION OF PHTHALATES CONTENTSAND THEIR HEALTH EFFECTS IN CONSUMED SACHET WATER BRANDS IN DELTA S ...
Journal: INTERNATIONAL JOURNAL OF BIOLOGICAL, BIOMOLECULAR, AGRICULTURAL, FOOD AND BIOTECHNOLOGICAL ENGINEERING, 2016
Author: EDJERE OGHENEKOHWIRORO, ASIBOR IRABOR GODWIN, UWEM BASSEY
Manufacture of hand hacksaw blades form locally available mild stee
Journal: The Nigerian Engineer, 1991
Author: IBHADODE, A.O.A. and OJEAH, C.C