PUBLICATIONS
Performance Evaluation of a Pilot Paraplegic Centricity Mobility Aid
Journal: Nigeria Journal of Technology (NIJOTECH), 2016
Author: Ashiedu F. I., Popoola E. O., and Akpan E. E.
Thermal behavior and UV properties of Organomodified kaolin oleochemically derived from Rubber Seed ...
Journal: Journal of Surface Engineered Materials and Advanced Technology,, 2013
Author: Mgbemena, C.O., Ibekwe, N.O., Mohamed, A.P., Menon, A.R.R. Sukumar, R.
The Instrumentality of Manufacturing in Translating Poverty to Prosperity
Journal: Inaugural Lecture Series, 2006
Author: Ibhadode, A.O.A.
Problems of Environmental Pollution and Control in the Nigeria Petroleum Industry
Journal: journal of research in Engineering and Environmental Studies, 2006
Author: Akpoturi P.E and Ndukwe J.O
MHD Stagnation Point Flow over a Permeable Vertical Plate with a Convective Surface Boundary Conditi ...
Journal: International Journal of Innovative Science, Engineering Technology,, 2015
Author: Akindele Michael Okedoye
ACCIDENT CAUSATIVE MODEL IN THE OIL AND GAS CONURBATION USING MARKOV CHAIN
Journal: International Journal of Scientific Research in Information Systems and Engineering , 2016
Author: Okwu, Modestus.O. Thaddeus Nwaoha Adeyemi, I. Olabisi and Ezurike Benjamin. O.
NUMERICAL MODELLING OF CURRENT ON WAVE DRIFT LOAD OF A SHIP SHAPED OFFSHORE STRUCTURES (CASE STUDY - ...
Journal: IJRDO-Journal of Mechanical And Civil Engineering, 2017
Author: Abam, Tamunopekere Joshua, Agbakwuru, Jasper Ahamefulal, Adeyemi, I. Olabisi
Optimizing the Output Current for a DC-DC Converter
Journal: Journal of Control Theory and Informatics, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles, ONYAN AARON OKIEMUTE
Seasonal Biodiversity Assessment of Benthic Macroinvertebrate of Asejire Reservoir, Southwest Nigeri ...
Journal: Journal of Sustainable Development, 2015
Author: Asibor, I. G.
DISTRIBUTION OF PHTHALATE ESTERS IN UNDERGROUND WATER FROM POWER TRANSMISSION SITES IN WARRI METROPO ...
Journal: Journal of applied science and environmental management, 2016
Author: EDJERE, O ASIBOR, IG BASSEY, U
Design of a PV-Connected DC-DC Converter
Journal: International Journal of Emerging Trends in Engineering and Development, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
Impact of Cartography on the Development of Tourism Business in Nigeria
Journal: Ofobruku S. A and Onosemuode C (ed) Tourism and Hospitality Business in Nigeria., 2014
Author: Onosemuode, Christopher
The Use of Geoinformatics in Site Selection for Suitable Landfill for Poultry Waste: A Case Study of ...
Journal: International Journal of Sciences, 2016
Author: Onosemuode C. and Abodurin W.A
A Simple Procedure for Calculating shut -in Tubing Pressure (SITP)
Journal: Journal of Engineering and Applied Scientific Research, 2014
Author: Akpoturi Peters
A Financial Option Based Price and Risk Management Model for Pricing Electrical Energy in Nigeria
Journal: Advances in Multidisciplinary and Scientific Research Journal, 2017
Author: D. Allenotor and A.A. Ojugo
Design of composite dies by the die expansion method
Journal: Technical Transactions of the Nigerian Society of Engineers, 1999
Author: IBHADODE, A.O.A
Optimisation of Alkaline Ethanolysis of Biodiesel Yield from Nigerian Coconut Oil using One Variable ...
Journal: Journal of Energy and Natural Resource Management, 2014
Author: Samuel O.D., Okwu M. O., Oreko U.O., Amosun S. T.
Solving For Computational Intelligence the Timetable-Problem
Journal: , Advances in Multidisciplinary Research Journal, 2016
Author: Ojugo, A. A., Oyemade, D. A., Allenotor, D.
Human exposure to endocrine-disrupting organochlorine and organophosphate pesticides in locally prod ...
Journal: International Journal of Environmental Health Research, 2024
Author: Tesi, G.O., Okpara, K.E., Tesi, J.N., Agbozu, I.E. and Techato, K.
CARBON NANOTUBES: A REVIEW OF THE CURRENT STATE-OF-THE-ART MATERIAL SCIENCE AND TECHNOLOGY TOWARDS A ...
Journal: Int J Cur Res Rev , 2015
Author: Boye T.E., Oyekale J.O., Arivie G.O.
Effects of Turning Parameters on Metal Removal and Tool Wear Rates for Low Carbon Steel
Journal: Nigerian Journal of Technology (NIJOTECH), 2016
Author: Mgbemena C.O Mgbemena C.E, Etebenumeh G, and Ashiedu F. I.
The Use of Geoinformatics in Landscape Development Control: A Case Study of Temidire Estate in Ogbom ...
Journal: Ekpoma Journal of Social Sciences. , 2015
Author: Onosemuode C. Akhimien and Ayankanmi A. J
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: IJETAE , 2013
Author: C.O Izelu, Eze S.C, B.U. Oreko and Edward B.A.
Critical Stress Analysis of a Formula One Racing Car Wishbone Suspension System
Journal: International Journal of Engineering and Manufacturing Science (IJEMS), 2016
Author: ThankGod Enatimi Boye and Chinedum Ogonna Mgbemena
Pareto Principle and Hazard Model as Tools for Apporpriate Scheduled Maintenance in a Manufacturing ...
Journal: African Journal of Science, Technology, Innovation and Development, 2016
Author: Johnson A. Fadeyi, Modestus O. Okwu, Chinedum O. Mgbemena, Kingsley C. Ezekiel
Near-surface structural model for enhanced seismic data acquisition and processing in North-Central ...
Journal: AMERICAN JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH, 2012
Author: G. I. Alaminiokuma and J. Amonieah
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
Tool wear of some hacksaw blades
Journal: Journal of the Nigerian Institution of Production Engineers, 1994
Author: IBHADODE, A.O.A
Trace Determination of Phthalates in ground water Sample by GC-MS using specific sample concentratio ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences, 2016
Author: Edjere, O., Pollard, P., and Maier, U.
Advances in materials and systems technologies IV : selected, peer reviewed papers from the 4th Inte ...
Journal: Advanced materials research, 2013
Author: Ibhadode, A. O. Akii / Aluyor, E.O.
Carbon Nanotube: The Building Blocks of Nanotechnology Development.
Journal: J.Nanotech. Prog. Int. (JONP) , 2016
Author: Boye, E.T., Achadu, J.O, Oreko, B.U and Samuel, O.D
ENERGY- CONTENT AND SPECTRAL ANALYSES OF SHOTS FOR OPTIMUM SEISMOGRAM GENERATION IN THE NIGER DELTA
Journal: International Journal of Geology, Earth Environmental Sciences, 2014
Author: Alaminiokuma G.I. and Emudianughe J.E.
Potentiation of the Antimicrobial Activity of 4-Benzylimino-2,3-Dimethyl-1-Phenylpyrazal-5-One by Me ...
Journal: Res J Chem Sci, 2011
Author: E.E.Elemike, A.P.Oviawe and I.E.Otuokere
Responsive Production Systems and Roles that Robots can Play
Journal: Advanced Materials Research, 2009
Author: R.H. Weston , Edited by : Prof. A.O. Akii Ibhadode, A.I. Igbafe and B.U. Anyata
Numerical Investigation of Thermo-Mechanical Behaviour of Ball Grid Array Solder Joint at High Tempe ...
Journal: al: Advanced Materials Research , 1994
Author: E.H. Amalu, N.N. Ekere, R.S. Bhatti, S. Mallik, G. Takyi, A.O. Akii Ibhadode
Using EF, PLI AND IGEO for the assessment of heavy metal pollution and sediment quality of Asejire R ...
Journal: International Journal of Environment and Pollution Research, 2015
Author: Asibor, I. G., Edjere, O., Adeniyi, F. and Ogundele, O.
Design and Development of a Paraplegic Centricity Mobility Aid
Journal: Journal of Emerging Trend in Engineering and Applied Science (JETEAS) , 2012
Author: Ashiedu Festus and Igboanugo A. C.
The viability of compressed natural gas (CNG) as an alternative automobile fuel in Nigeria
Journal: Journal of Social Management Sciences, 1997
Author: AKELE, S.M.G. and IBHADODE, A.O.A.
Geochemistry and Environmetric Approaches to Estimating Pollution Impacts on soils around Okaba Coa ...
Journal: Brit. Jour of Applied Science and Technology, 2014
Author: Ameh, E.G. Imasuen, I.O. and Imeokparia, E.G
Application of Sinusoidal Model to a Maintenance Time Series Data.
Journal: Fupre Journal of Scientific and Industrial Research (FJSIR), 2017
Author: Popoola, E, O. and Ashiedu F. I.
Phase-based neuron training using evolutionary algorithms.
Journal: Fundamentals of Electrical Engineering (ISFEE), 2014 International Symposium, 2014
Author: Sorin Laureniu Stnescu Omonigho Benedict Otanocha
The Effect of Billet Location on Completely Closed Cavity Die Forging
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
Effect of Brain Drain (Human Capital Flight) of Librarians on Service Delivery in Some Selected Nige ...
Journal: SAGE Open, 2014
Author: Clara Chinyere Okoro, Saturday U. Omeluzor and Itunu A. Bamidele
Predictive Model for Cement Clinker Quality Parameters
Journal: Journal of Materials Science and Chemical Engineering., 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Computer Aided Structural Analysis of Axle Tilting Effect on Tractor Front Axle Support.
Journal: Innovative Systems Design and Engineering,, 2014
Author: Aduloju, S.C., Mgbemena, C.O., Ebhota,W.S., Bolarinwa, G.O.
Development of FeOTiO2-SiO2-CaCO3 System as a Welding Flux
Journal: Nigerian Journal of Engineering Research and Development, 2004
Author: Oyawale F.A. and Ibhadode A.O.A
A HIGHER ODER POLYNOMIAL FOR OPTIMAL PRICING AND REPLENISHMENT STRATEGIES FOR A RETAIL/DISTRIBUTION ...
Journal: International Journal of Scientific Engineering and Applied Science (IJSEAS), 2015
Author: A. M. Okedoye,P PPh.D
A Client Trusted Framework for Dependable Cloud Computing
Journal: Scientia Africana, An International Journal of Pure Applied Sciences, 2017
Author: Oyemade, D. A, Allenotor, D., Ojugo, A. A.
Experimental Study on a Line-Axis Concentrating Solar Energy Collector for Water Heating
Journal: Industrial Engineering, 2017
Author: Frederick Ikpakwu, Anthony Okoronkwo, Modestus Okwu, Emmanuel Anyanwu
Engineering Design Criteria for Wheelchair: AHP approach
Journal: Journal of Sustainable Technology (JoST), 2015
Author: Nwaoha T. C. and Ashiedu F. I.