PUBLICATIONS
The use of Remote Sensing Imageries in Monitoring Changes in Surface Water in Lake Chad Drainage Bas ...
Journal: Nigeria Journal of Tropical Geography., 2008
Author: Onosemuode C. Akhimien F. O. and Kundu J..
A Factorial Study of Accessibility Requirements of Paraplegics in a Built-up Environment
Journal: Journal of Innovative Research in Engineering and Science (JOIRES), 2011
Author: Ashiedu, F. And Igboanugo A. C.
Protoliths and Petrogenesis of Precambrian gneisses from the Igbeti Area Southwest Nigeria
Journal: Chemie der Erde, 1991
Author: Imeokparia, E.G., and Emofurieta, W.O
Effect of cutting fluids on tool wear during turning operations
Journal: Technical Transactions of the Nigerian Society of Engineers, 1999
Author: MUSA, M. and IBHADODE, A.O.A
A dynamic level technical indicator model for oil price forecasting
Journal: Global Journal of Computer Science and Technology: G Interdisciplinary, 2021
Author: David Ademola Oyemade, David Enebeli
DESIGN AND DEVELOPMENT OF A LOW-COST WASHING MACHINE SUITABLE FOR POLYTHENE MATERIALS
Journal: Asian Journal of Current Research, 2017
Author: EMAGBETERE EYERE, ADEYEMI I. OLABISI AND OGHENEKOWHO P. ARUOTURE1
Adjustment to Oil Saturation Estimate Due to Various Reservoir Drive Mechanisms
Journal: International Journal of Advanced Petroleum Engineering and Technology, 2014
Author: Okotie Sylvester and Ikporo Bibobra
Measurements and Evaluation of Anthropometric Data of Nigerian Adult Paraplegics for Wheelchair Desi ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences (JETEAS) , 2013
Author: Ashiedu, F. I. and Igboanugo A. C.
Justification for Oil Well Stimulation
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Okotie Sylvester, Ubani C. E., Ikporo Bibobra
Synthesis, crystal structure, electrochemical and anti-corrosion studies of Schiff base derived from ...
Journal: Molecular structure, 2017
Author: Elias E. Elemike, Damian C. Onwudiwe, Henry U. Nwankwo, Eric C. Hosten
Investigating the Calibration Curves for a Two Component Cutting Tool Lathe Dynamometer Using Finite ...
Journal: International Journal of Engineering Research in Africa, 2010
Author: Osezua Obehi Ibhadode, Ishaya Musa Dagwa, Akii Okonigbon Akhaehomen Ibhadode
Computer Aided Structural Analysis of Axle Tilting Effect on Tractor Front Axle Support.
Journal: Innovative Systems Design and Engineering,, 2014
Author: Aduloju, S.C., Mgbemena, C.O., Ebhota,W.S., Bolarinwa, G.O.
The Capability of using GIS in Managing Environmental Problem in the Niger Delta
Journal: Journal of Empirical Research., 2006
Author: Onosemuode, C and Okhae, S.E.
Corner filling characteristics in precision forging
Journal: International Journal of Machine Tools and Manufacture , 1988
Author: A.O.A. Ibhadode,T.A.Dean
Development of FeOTiO2-SiO2-CaCO3 System as a Welding Flux
Journal: Nigerian Journal of Engineering Research and Development, 2004
Author: Oyawale F.A. and Ibhadode A.O.A
The Design of a Manual Table-Top Grinder,
Journal: Scholars Journal of Engineering and Technology,, 2014
Author: Abdulmalik, I.O., Michael, A., Akonyi, N.S., Mgbemena, C.O., Aaron-Orsu, C.J Ambali, A.O.
Evaluation of Phthalates Contents and Their Health Effects in Consumed Sachet Water Brands in Delta ...
Journal: International Journal of Biological, Biomolecular, Agricultural, Food and Biotechnological Engineering, 2016
Author: Edjere, O., Asibor, G. and Bassey, U.
Malware Propagation on Social Time Varying Networks: A Comparative Study of Machine Learning Framewo ...
Journal: International Journal of Modern Education and Computer Science (IJMECS), 2014
Author: A.A. Ojugo, E. Ben-Iwhiwhu, O. Kekeje, M.O. Yerokun, I.J.B. Iyawa
Phase-based neuron training using evolutionary algorithms.
Journal: Fundamentals of Electrical Engineering (ISFEE), 2014 International Symposium, 2014
Author: Sorin Laureniu Stnescu Omonigho Benedict Otanocha
A Regression Analysis Approach to Queueing System Modelling: A Case of Banks.
Journal: Journal of Applied Sciences Research,, 2011
Author: Mgbemena, C.E., Mgbemena, C.O., Chinwuko, C.E.
NUMERICAL MODELLING OF CURRENT ON WAVE DRIFT LOAD OF A SHIP SHAPED OFFSHORE STRUCTURES (CASE STUDY - ...
Journal: IJRDO-Journal of Mechanical And Civil Engineering, 2017
Author: Abam, Tamunopekere Joshua, Agbakwuru, Jasper Ahamefulal, Adeyemi, I. Olabisi
Plant-mediated biosynthesis of silver nanoparticles by leaf extracts of Lasienthra africanum and a s ...
Journal: Bull Mat Sci, 2017
Author: Elias E. Elemike, Damian C.Onwudiwe, Arijeh Olayinka, Henry U.Nwankwo
Performance of seismic detectors: a case study of the sensitivity of SM-4 geophones used in Nigeria
Journal: International Research Journal of Earth Sciences, 2017
Author: G.I. Alaminiokuma and W.N. Ofuyah
Application of Markov Theoretical Model in Predicting Risk Severity and Exposure Levels of Workers i ...
Journal: International Journal of Mechanical Engineering and Applications, 2016
Author: Okwu Modestus Okechukwu Thaddeus C. Nwaoha Ombor Garrick
Deformation of solid cylindrical forgings in a completely closed cavity die
Journal: Nigerian Society of Engineers Technical Transactions, 1993
Author: IBHADODE, A.O.A. and DEAN, T.A
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
The Design of a Linear Quadratic Optimal Regulator for Transient Heat flow in Continuous Casting of ...
Journal: International Journal of Current Research, 2016
Author: Obinabo E. C. Izelu C. O. Nwaoha T. C. and Ashiedu F. I.
Office Noise Pollution in industrial and commercial premises in Nigeria
Journal: Nigerian journal of Industrial and Systems Studies (NJISS), 2005
Author: Akpoturi P E and J Ndukwe
Optimization of Nigerian Restaurant Waste Cooking Biodiesel Reaction Parameters using Response Surfa ...
Journal: International Journal of Energy Optimization and Engineering, 2014
Author: Waheed, M.A., Samuel, O.D., Bolaji, B.O. and Dairo, O.U.
Introduction to Manufacturing Technology
Journal: Open Journal of Energy Efficiency, 2013
Author: Mala Abba-Aji, Vincent Ogwagwu, Bukar Umar Musa, Prof. A.O. Akii Ibhadode (Contributor)
Fuzzy Based System for Power Consumption Prediction
Journal: Journal of Engineering Science and Computing, , 2017
Author: EMAGBETERE, Eyere, BOYE, E. ThankGod, OGHENEVWAIRE, S. Iyabo
Manufacture of hand hacksaw blades form locally available mild stee
Journal: The Nigerian Engineer, 1991
Author: IBHADODE, A.O.A. and OJEAH, C.C
Advances in materials and systems technologies IV : selected, peer reviewed papers from the 4th Inte ...
Journal: Advanced materials research, 2013
Author: Ibhadode, A. O. Akii / Aluyor, E.O.
Design and Development of a Manual Pump for Agrarian Communities
Journal: International Journal of Current Research , 2016
Author: Ashiedu F. I., Nwaoha T. C. and Izelu C. O.
DEVELOPMENT OF ERASABLE WHITEBOARD MARKER INKS
Journal: Canadian International Journal of Science and Technology,, 2017
Author: Kindness Uyanga Paul Onaji Modestus O. Okwu.
Using factor Cluster analysis and enrichment methods to evaluate impact of cement production on str ...
Journal: Advances in Applied Science Research, 2011
Author: Ameh, E.G., Kolawole, M.S. and Imeokparia, E.G.
The Conceptualization of Baloguns (1980) Communication Model In Evaluating the Symbols used on Tou ...
Journal: Indian Journal of Multidisciplinary Research,, 2008
Author: Onosemuode C. Akhimien F. O. and Aliyu A. H
Computational Modeling of Extracellular Matrix Protein Stamping on Hard Substrates for Biomedical Mi ...
Journal: Advances in Life Science and Technology, , 2014
Author: Aduloju, S.C., Nima, R., Mgbemena, C.O., Soboyejo, W.O.
Determining Temperature Extreme in Warri City, Niger-Delta Region, Nigeria
Journal: 9(3): 160-166, 2019 Article no.IJECC.2019.013 ISSN: 2581-8627, 2019
Author: Y. S. Onifade1 and V. B. Olaseni1
Empirical Method to Predict the Performance of Human Powered Mono Hull Boats
Journal: International Journal of Engineering and Technologies, 2016
Author: Pereowei G. Ombor, Agbakwuru Jasper, Modestus O. Okwu,
Work-Trips Generation in Warri and Environs: A Spatial Perspective
Journal: Journal of Environmental Studies, 2007
Author: Onosemuode, C and Onosemuode, K. E . .
Minimizing the risk of erosion damage of some wells in Niger Delta Field with clampon DSP monitor
Journal: International Journal of Petroleum Engineering, 2015
Author: Ikporo Bibobra, Okotie Sylvester and Ichenwo John-Lander
On a Method for Die Container Design in Completely Closed Die Forging
Journal: TRANSACTIONS- AMERICAN SOCIETY OF MECHANICAL ENGINEERS JOURNAL OF MECHANICAL DESIGN, 1997
Author: Ibhadode, A. O. A.
Influence of Thermal cycling on the fatigue resistance of Medium Carbon Steel.
Journal: Open Journal of Advanced Engineering Techniques,, 2013
Author: Orumwense, F.F.O., Agbadua, S.A., Mgbemena, C.O., Ubani, N.O.
Crystal structure of tetraaquabis(3,5-diamino- 4H-1,2,4-triazol-1-ium)cobalt(II) bis[bis(pyridine-2, ...
Journal: Acta Cryst, 2015
Author: Atim Johnson, Justina Mbonu, Zahid Hussain, Wan-Sin Lohe and Hoong-Kun Funf,
The influence of Creep on the Mechanical properties of Calcium Carbonate Nanofiller Reinforced Polyp ...
Journal: Journal of Minerals and Materials Characterization and Engineering. , 2011
Author: Ihueze, C.C., Mgbemena, C.O., Ugwu, S.
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
Manufacture of metal-arc welding electrodes from locally available materials
Journal: Journal of the Nigerian Institution of Production Engineer, 1993
Author: OKOH, I.G. and IBHADODE, A.O.A
Directional Well Trajectory Design : The Theoretical Development of Azimuth Bends and turns in compl ...
Journal: Nigerian journal of technology (NIJOTECH), 2016
Author: P.O Okpozo, Akpoturi Peters, W.C Okologume
Characterization of Kaolin intercalates of Oleochemicals derived from Rubber Seed (Hevea brasiliensi ...
Journal: Journal of King Saud University-Science, 2013
Author: Mgbemena, C.O., Ibekwe, N.O., Mohamed, A.P., Menon, A.R.R. Sukumar, R.