PUBLICATIONS
Performance of seismic detectors: a case study of the sensitivity of SM-4 geophones used in Nigeria
Journal: International Research Journal of Earth Sciences, 2017
Author: G.I. Alaminiokuma and W.N. Ofuyah
Introduction to Manufacturing Technology
Journal: Open Journal of Energy Efficiency, 2013
Author: Mala Abba-Aji, Vincent Ogwagwu, Bukar Umar Musa, Prof. A.O. Akii Ibhadode (Contributor)
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
Advances in materials and systems technologies
Journal: Advanced materials research, 2007
Author: A O Ibhadode
Fuzzy Based System for Power Consumption Prediction
Journal: Journal of Engineering Science and Computing, , 2017
Author: EMAGBETERE, Eyere, BOYE, E. ThankGod, OGHENEVWAIRE, S. Iyabo
ENERGY- CONTENT AND SPECTRAL ANALYSES OF SHOTS FOR OPTIMUM SEISMOGRAM GENERATION IN THE NIGER DELTA
Journal: International Journal of Geology, Earth Environmental Sciences, 2014
Author: Alaminiokuma G.I. and Emudianughe J.E.
Punch and Counterpunch Design by the Die Expansion Method in Completely Closed Die Forging
Journal: MATERIALS SCIENCE FORUM, 2006
Author: Ibhadode, A. O. A.
Design of DC-link Voltage Controller and Grid Current Controller in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
A Validation Method of Computational Fluid Dynamics (CFD) Simulation against Experimental Data of Tr ...
Journal: American Journal of Engineering Research (AJER), 2017
Author: ThankGod E. Boye, Thaddeus C. Nwaoha Samuel D. Olusegun, Festus I. Ashiedu
Influence of Thermal cycling on the fatigue resistance of Medium Carbon Steel.
Journal: Open Journal of Advanced Engineering Techniques,, 2013
Author: Orumwense, F.F.O., Agbadua, S.A., Mgbemena, C.O., Ubani, N.O.
FAITH Software Life Cycle Model for Forex Expert Advisors
Journal: Journal of Advances in Mathematical and Computational Sciences, 2021
Author: Oyemade, D. A., Allenotor, D.
Organophosphate pesticides in herbal mixtures from Bayelsa State, Nigeria: implication for human exp ...
Journal: Journal of Environmental Exposure Assessment, 2025
Author: Tesi, G.O., Lari, B., Ogbuta, A.A., Felagha, I., Obodoka, G.C., Ogbomade, W.E., Okpara, K.E., Osioma, E. and Agbozu, I.E
Cloud Computing Model for Virtual Libraries Implementation in Nigerian Tertiary Institutions
Journal: International Journal of Open Information Technologies, 2017
Author: Abdulwaheed YusufIse Anderson OroborAtanda Sambo
APPLICATION OF CASSAVA PEELS ACTIVATED CARBON IN THE TREATMENT OF OIL REFINERY WASTEWATER A COMPARA ...
Journal: Journal of Ecological Engineering, 2016
Author: Kigho Moses Oghenejoboh, Smith Orode Otuagoma, Evuensiri Onogwharite Ohimor
A stochastic model for face detection
Journal: Advances in Multidisciplinary and Scientific Research Journal, 2016
Author: A.A. Ojugo., D.A. Oyemade., D. Allenotor
Hydrological Analysis of Onitsha North East Drainage Basin Using Geoinformatic Techniques.
Journal: World Applied Sciences Journal , 2010
Author: Onosemuode C. Adetimirin O. I and Aboderin S. O.
Total Hydrocarbon Content in water and sediment samples from coastal region of Nigeria
Journal: journal ofEngineering Science and Technology, 2010
Author: Otitigbe F and Akpoturi P.E
Petrochemistry of the Gamawa Syenite-Granite Complex, Northern Nigeria.
Journal: African Journal Science and Technology, , 1990
Author: Imeokparia, E.G
Optimization of Nigerian Restaurant Waste Cooking Biodiesel Reaction Parameters using Response Surfa ...
Journal: International Journal of Energy Optimization and Engineering, 2014
Author: Waheed, M.A., Samuel, O.D., Bolaji, B.O. and Dairo, O.U.
Effects of Reinforcement Combinations of Calcium Carbonate nanofiller on the Mechanical and Creep p ...
Journal: Journal of Minerals and Materials Characterization and Engineering, , 2010
Author: Ihueze, C.C. Mgbemena, C.O.
Utilization of cellulosic cassava waste for bio-ethanol production
Journal: JECE, 2015
Author: Elias E.Elemike, Ojiefoh C.Oseghale, Anthony C.Okoye
Computational Approach to Fracture Modelling of Polypropylene/Talc Composites.
Journal: Journal of Minerals and Materials Characterization and Engineering, , 2012
Author: Mgbemena, C.O., Okoye, O.A.
Optimizing the Output Current for a DC-DC Converter
Journal: Journal of Control Theory and Informatics, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles, ONYAN AARON OKIEMUTE
APPLICATION OF DESIGN EXPERT IN THE ANALYSIS OF RESPONSE TRANSFORMATION OF PROCESSES A CASE STUDY O ...
Journal: International Journal of Advanced Research (IJAR), 2017
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora and Eke Akachukwu Ben.
Methods, effect and challenges of Library instruction in academic libraries.
Journal: Library Philosophy and Practice., 2017
Author: Saturday U. Omeluzor, Alarape Asimi Akibu, Sunday Ikhimeakhu Dika and Clement C. Ukangwa
Assessment of the Impacts of Refinery Effluent on the Physico-chemical Properties of Ubeji Creek, De ...
Journal: Journal of Environmental Analytical Toxicology , 2017
Author: Eunice OE, Frank O, Voke U, Godwin A
Risering of a Four-Cavity Die Production Mould by Convectional Method
Journal: Advanced Materials Research, 1994
Author: Prof. A.O. Akii Ibhadode, A.I. Igbafe and B.U. Anyata
Static Analysis of Tyre Model Developed from Natural Rubber Vulcanizates.
Journal: Lecture Notes in Computer Science, 2016
Author: Mgbemena, C.O., Mgbemena, C.E., Ashiedu, F.I. Menon, A.R.R. Oral Paper presented at The 2016 International Conference
A Simple Procedure for Calculating shut -in Tubing Pressure (SITP)
Journal: Journal of Engineering and Applied Scientific Research, 2014
Author: Akpoturi Peters
Economic Evaluation of Electrical Submersible Pump (ESP) and Gas Lift Well For Production Optimizati ...
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Ezekiel Chuks., Okotie Sylvester.and Dulu Appah
Work Flow for Reservoir Study and Challenges
Journal: Onepetrol Journal, 2015
Author: Okotie Sylvester. and Stanley Buduka. and Ikporo Bibobra
Design and Finite Element Analysis of Double - Acting, Double - Ends Hydraulic Cylinder for Industri ...
Journal: American Journal of Engineering Research (AJER), 2017
Author: 1. ThankGod E. Boye, Adeyemi, I. Olabisi, Eyere E. Emagbetere
Existence and uniqueness, and asymptotic stability analysis of solution of a retarded equation model ...
Journal: icastor Journal of Mathematical Sciences, 2010
Author: Igobi, D. K. and Egwurube, M. and Musa, Samuel and Oyemade, D. A.
Integration and Analysis of Unstructured Data for Decision Making: Text Analytics Approach
Journal: International Journal of Open Information Technologies, 2016
Author: Orobor Anderson Ise
Automated Student Attendance Management System Using Face Recognition
Journal: International Journal of Educational Research and Information Science, 2018
Author: Ofualagba Godswill, Omijie Osas, Orobor Anderson, Ibhadode Oseikhuemen, Odiete Etse
The Role of Solid Mineral Mapping for Sustainable Development in Nasarawa State
Journal: M.E Ufuah and R.O. Olomo [ed.] Cartography and GIS for Sustainable Solid Mineral Development in Nigeria. A Publication, 2005
Author: Onosemuode Christopher
Design and Development of a Petrol-powered Hammer mill for rural Nigerian Farmers
Journal: Journal of Energy Technologies and Policy, 2014
Author: Adekomaya, S.O., Samuel, O.D
Technical Properties of Some Plant Fibres Compared with Glass Fibre
Journal: : International Journal of Engineering Research in Africa , 2010
Author: M. Sumaila, A.O. Akii Ibhadode
Strategies to enhance Environmenatally Conscious Engineering safety Practices in Nigeria
Journal: journal of Engineering Studies, 2005
Author: Akpoturi P.E
Development of home made crucibles for traditional metal casting
Journal: Journal of the Nigerian Institution of Production Engineers, 1998
Author: IBHADODE, A.O.A.
Investigations into the Applications of Ergonomics Principles in the Design of School Furniture in N ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences, 2013
Author: Ashiedu F. I. and Amiebenomon, S. O.
Production of Biodiesel from Nigeria Restaurant Waste Cooking Oil using Blender.
Journal: International Journal of Renewable Energy Research, 2013
Author: Samuel, O.D., Waheed, M.A., Bolaji B.O. and O.U. Dairo
Hyperelastic modelling and limit stress prediction of a P195/55 R16 85H Radial tire developed from N ...
Journal: American Journal of Material Sciences and Applications., 2014
Author: Ihueze, C.C, Mgbemena, C.O.
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: Australian Journal of Engineering Research. , 2015
Author: C.O Izelu, Eze S.C, Oreko B.U and Edward, B.A
Simulation and experimental verification of completely closed cavity die forging on a mechanical pre ...
Journal: Proc. Institution of Mechanical Engineers, 1989
Author: IBHADODE, A.O.A. and DEAN, T.A
Gas Lift a tool to Production Optimization
Journal: International Journal of Oil, Gas and Coal Engineering, 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ovuema Augustina
Design of DC-link Voltage Controller and Grid Current Controller in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Carbon Nanotube: The Building Blocks of Nanotechnology Development.
Journal: J.Nanotech. Prog. Int. (JONP) , 2016
Author: Boye, E.T., Achadu, J.O, Oreko, B.U and Samuel, O.D
Design and Manufacture of a 30-ton Hydraulic Press
Journal: A U J.T. 14(3): 196-200 (Jan. 2011) Technical Report , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Problems and solutions involved in oil processing from kernel seeds.
Journal: The Pacific Journal of Science and Technology, 2012
Author: Samuel, O.D and Alabi, A.G.F