PUBLICATIONS
The Design of a Linear Quadratic Optimal Regulator for Transient Heat flow in Continuous Casting of ...
Journal: International Journal of Current Research, 2016
Author: Obinabo E. C. Izelu C. O. Nwaoha T. C. and Ashiedu F. I.
A Cost-Based Approach for Analysing the Overheads of Multicast Protocols in Non-Strictly Hierarchica ...
Journal: International Journal of Communication Networks and Information Security (IJCNIS), 2011
Author: Akpojaro, J., Aigbe, P., Oyemade, D
Indigenous development of a 3horsepower petrol engine
Journal: Nigerian Journal of Engineering Research and Development, 2006
Author: IBHADODE, A.O.A. and AMALU, E.H.
A Critical review of in-situ transesterification process for Biodiesel Production.
Journal: The Pacific Journal of Science and Technology, 2012
Author: Samuel, O.D. and Dairo, O.U.,
Impact of biologically treated effluent on the physico-chemical quality of a receiving stream in Ile ...
Journal: Journal of Sustainable Development, 2015
Author: Asibor, G., Edjere, O. and Adeniyi, I. F.
Communication: An Instrument for Wealth Creation
Journal: African Journal Of Arts And Cultural Studies , 2009
Author: Otanocha, B. Omonigho and Nkwor, Chimezie Agbafor
Hybrid Neural Network Models for Rainfall Runoffs: Comparative study
Journal: Advancement in Scientific and Engineering Research, 2013
Author: Ojugo, A. A., Abere, R., Eboka, A.O., Yerokun, M. O, Yoro, R. E., Onochie, C. C. and Oyemade, D.
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
MHD Stagnation Point Flow over a Permeable Vertical Plate with a Convective Surface Boundary Conditi ...
Journal: International Journal of Innovative Science, Engineering Technology,, 2015
Author: Akindele Michael Okedoye
Phase-based neuron training using evolutionary algorithms.
Journal: Fundamentals of Electrical Engineering (ISFEE), 2014 International Symposium, 2014
Author: Sorin Laureniu Stnescu Omonigho Benedict Otanocha
Advances in materials and systems technologies III
Journal: Advanced materials research, 2012
Author: Prof. A.O. Akii Ibhadode
Technical Properties of some plant fibres compared with glass fibre
Journal: International Journal of Engineering research in Affrica, 2014
Author: M. Sumaila, Ao. Ibhadode
The Spatial Assessment of Wastes Collection Points Using GIS Approach.
Journal: The Nigerian Journal of Cartography and GIS., 2013
Author: Onosemuode C. Ajayi O. Ayodele and Esemedade J. U
The Advocacy of GIS in the Police Force for Crime Detection, Prevention and Control: A Case Study o ...
Journal: The Nigeria Academic Forum, 2003
Author: Onosemuode Christopher
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
Phytochemical screening, antioxidant and antimicrobial activities of Acalypha ciliata plant
Journal: Clinical phytoscience, 2016
Author: Oluwakayode Odeja, Christiana Ene Ogwuche, Elias Emeka Elemike and Grace Obi
Optimizing the Output Current for a DC-DC Converter
Journal: Journal of Control Theory and Informatics, International Institute for Science, Technology and Education, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles and Onyan Aaron Okiemute
Effects of Sodium Hydroxide Concentration on the Physical Properties of Zeolite Produced from Local ...
Journal: European Journal of Scientific Research, 2011
Author: Oghenejoboh, K. M. and Ohimor, E. O.
Some physical and mechanical properties of asbestosfree experimental brake pad
Journal: JOURNAL OF RAW MATERIALS RESEARCH , 2006
Author: I M. Dagwa, A. O. A. Ibhadode
Investigations into the Applications of Ergonomics Principles in the Design of School Furniture in N ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences, 2013
Author: Ashiedu F. I. and Amiebenomon, S. O.
Corner filling characteristics in precision forging
Journal: International Journal of Machine Tools and Manufacture , 1988
Author: A.O.A. Ibhadode,T.A.Dean
FAITH Software Life Cycle Model for Forex Expert Advisors
Journal: Journal of Advances in Mathematical and Computational Sciences, 2021
Author: Oyemade, D. A., Allenotor, D.
Performance Evaluation of the Predictive Models for Free Fatty Acid Content and Biodiesel Yield from ...
Journal: International Journal of Engineering Research Technology (IJERT), 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Synthesis of Silver Nanoparticles using Some Alcoholic Beverages from Nigeria Market
Journal: Int J Nano Mat Sci, 2013
Author: Adesuji Elijah Temitope, Elemike Elias Emeka, Chuku Aleruchi, Labulo Ayomide Hassan,Owoseni Mojisola Christiana, Oseghal
Regression Analysis And The Use of SPOT Remotely Sensed Data in Monitoring Environmental Changes..
Journal: Asian Journal of Information Technology (AJIT) , 2007
Author: Onosemuode, C and Olanruwanju, S
The Effect of Calcium Carbonate at Low Volume Fractions On the Mechanical Properties of Polypropylen ...
Journal: Journal of Engineering and Applied Sciences, , 2010
Author: Mgbemena, C.O., Ubani, N.O., Mgbemena, C.E.
Distribution of Phthalate Esters in Underground Water from Power Transmission Sites in Warri Metropo ...
Journal: Journal of Applied Sciences and Environmental Management, 2016
Author: Edjere, O., Asibor, I.G. and Bassey, U.
Performance Evaluation of an Indigenous Rotary Power Weeder
Journal: Energy and Environmental Engineering Journal, 2012
Author: Olaoye, J. O. and Samuel, O. D. and Adekanye, T. A
Biosynthesis, characterization and antimicrobial effect of silver nanoparticles obtained using Lavan ...
Journal: Res.Chem Int, 2017
Author: Elias E. Elemike, Damian C. Onwudiwe,Anthony C. Ekennia Lebogang Katata-Seru
Computer Aided Structural Analysis of Axle Tilting Effect on Tractor Front Axle Support.
Journal: Innovative Systems Design and Engineering,, 2014
Author: Aduloju, S.C., Mgbemena, C.O., Ebhota,W.S., Bolarinwa, G.O.
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in industry, 2011
Author: C.U. ATUANYA, A.O.A. IBHADODE, A.C. IGBOANUGO
ANALYSIS OF COCONUT ETHYL ESTER (BIODIESEL) AND FOSSIL DIESEL BLENDING: PROPERTIES AND CORROSION CHA ...
Journal: Nigerian Journal of Technology, 2016
Author: Samuel, O. D., Ashiedu, F. I., Oreko, B. U
Optimizing the Output Current for a DC-DC Converter
Journal: Journal of Control Theory and Informatics, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles, ONYAN AARON OKIEMUTE
Tourist Sites in Delta State, Nigeria
Journal: Achieving Millennium Development Goals Through Mapping, David A. Musa and W.D.C Wokoma (ed), 2007
Author: Onosemuode, C .
Evaluation of Pure Aluminium Inoculated with Varying Grain Sizes of an Agro-waste based Inoculant
Journal: Advances in Science, Technology and Engineering Systems Journal , 2017
Author: 2. Adeyemi I. Olabisi, ThankGod E. Boye, Emagbetere Eyere
An assessment of rural libraries and information services for rural development: A study of Delta St ...
Journal: The Electronic Library, 2017
Author: Saturday U. Omeluzor, Gloria O. Oyovwe-Tinuoye, Uche Emeka-Ukwu
APPLICATION OF BOX-BEHNKEN DESIGN FOR THE OPTIMIZATION OF STEAM TURBINE EFFICIENCY
Journal: World Journal of Engineering Research and Technology, 2017
Author: Eyere Emagbetere, Festus I. Ashiedu, Olusegun D. Samuel and Modestus O. Okwu
Metalization of the Ririwai Complex, Northern Nigeria and the Geochemical Evolution of Acid Magmas i ...
Journal: Geological Society of America, 1989
Author: Chalokwu, C.I. and Imeokparia, E.G.
Cloud Computing Model for Virtual Libraries Implementation in Nigerian Tertiary Institutions
Journal: International Journal of Open Information Technologies, 2017
Author: Abdulwaheed YusufIse Anderson OroborAtanda Sambo
Diamond Bit Selection for Horizontal Wells
Journal: journal of Engineering Research and Sustainable Development, 2009
Author: Akpoturi Peters and Onwuachi- Iheagwara P .N
Determining Temperature Extreme in Warri City, Niger-Delta Region, Nigeria
Journal: 9(3): 160-166, 2019 Article no.IJECC.2019.013 ISSN: 2581-8627, 2019
Author: Y. S. Onifade1 and V. B. Olaseni1
An Alternative Algorithm and R Programming Implementation for Least Absolute Deviation Estimator of ...
Journal: Journal of Modern Applied Statistical Methods , 2016
Author: Ogundele Suraju Olaniyi, J. I. Mbegbu and C. R. Nwosu
Porosity-Permeability Regimes in Reservoirs for Hydrocarbon Prospectivity in Nembe Creek Field, Nige ...
Journal: Journal of Applied Geology and Geophysics, 2017
Author: G. I. Alaminiokuma and W. N. Ofuyah
Developments in the Measurement and Estimation Methods for Cement Clinker Quality Parameters
Journal: International Journal of Engineering Research Technology (IJERT), 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Modelling of Multiphase Flow Metering for Crude Oil Production Monitoring
Journal: International Journal of Current Engineering and Technology, 2015
Author: Ego C. Obukohwo, Okologume C. Wilfred, Dulu Appah and Marcus B. Umeleuma
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
Assessing mechanical properties of natural fibre reinforced composites for engineering applications ...
Journal: Journal of Minerals and Materials Characterization and Engineering, 2012
Author: Samuel, O.D., Agbo, S. and Adekanye, T.A.
Sequestering of Fe and Pb ions from Wastewater by Canarium schweinfurthii after carbonization and ch ...
Journal: Journal of Applied Science and Environmental Management, 2016
Author: Bassey Uwem, Oghenekohwiroro Edjere and Solomon Ebiye Otolo
Using factor Cluster analysis and enrichment methods to evaluate impact of cement production on str ...
Journal: Advances in Applied Science Research, 2011
Author: Ameh, E.G., Kolawole, M.S. and Imeokparia, E.G.
Thermal stability of pulverized palm kernel shell (PKS) based friction lining material locally deve ...
Journal: ChemXpress , 2014
Author: Mgbemena, C.O., Mgbemena, C.E. Okwu, M.O.