PUBLICATIONS
Introduction to Manufacturing Technology
Journal: Open Journal of Energy Efficiency, 2013
Author: Mala Abba-Aji, Vincent Ogwagwu, Bukar Umar Musa, Prof. A.O. Akii Ibhadode (Contributor)
UNSTEADY MHD MIXED CONVECTION FLOW PAST AN OSCILLATING PLATE WITH HEAT SOURCE/SINK
Journal: Journal of Naval Architecture and Marine Engineering, 2014
Author: A. M. Okedoye
A Three Tier Learning Model for Universities in Nigeria
Journal: Journal of Technologies in Society, 2016
Author: Oyemade, D. A., Akpojaro, J., Ojugo, A., Ureigho, R. J., Imouokhome, F. A., Omoregbee, E. U.
Impact of PCBs from Transmission Oil Discharges: A Case Study of Power Distribution Installations in ...
Journal: Nigerian Journal of Applied Science, 2016
Author: Edjere, O., Asibor, G. and Otolo, S.
Modelling and optimization of surface roughness and machining induced vibration 41Cr4 alloy structu ...
Journal: The International Journal Of Engineering And Science (IJES), 2016
Author: Izelu, C.O., Eze, S.C. and Samuel, Olusegun David
Synthesis of Silver Nanoparticles using Some Alcoholic Beverages from Nigeria Market
Journal: Int J Nano Mat Sci, 2013
Author: Adesuji Elijah Temitope, Elemike Elias Emeka, Chuku Aleruchi, Labulo Ayomide Hassan,Owoseni Mojisola Christiana, Oseghal
Advances in Materials and Systems Technologies III
Journal: Advanced materials research, 2012
Author: Prof. A.O. Akii Ibhadode
Design and Development of a 10 Million Liters Capacity Petroleum Product Storage Tank.
Journal: The International Journal Of Engineering And Science (IJES)., 2016
Author: D.R. Enarevba, C.O. Izelu, B.U. Oreko and E. Emagbetere
The viability of compressed natural gas (CNG) as an alternative automobile fuel in Nigeria
Journal: Journal of Social Management Sciences, 1997
Author: AKELE, S.M.G. and IBHADODE, A.O.A.
A Study of Land use Change in Warri, Delta State.
Journal: The Built Environment Journal, 2006
Author: Onosemuode, C. Ufuah, M.E. and Ifatimehin, O.O.
Design and Development of a Paraplegic Centricity Mobility Aid
Journal: Journal of Emerging Trend in Engineering and Applied Science (JETEAS) , 2012
Author: Ashiedu Festus and Igboanugo A. C.
Assessment of the activities of scavengers and their economic impacts in waste recovery in Warri met ...
Journal: International Research Journal of Public and Environmental Health, 2017
Author: Asibor Godwin, Edjere Oghenekohwiroro
Laser Surface Micro/nano Patterning for Improving Aerodynamic Performance
Journal: Ph. D Thesis, 2015
Author: Otanocha, O.B
Modeling Hyperelastic Behavior of Natural Rubber/Organomodified Kaolin Composites Oleochemically Der ...
Journal: Journal of Scientific Research Reports, , 2014
Author: Ihueze,C.C Mgbemena,C.O.
Immunization Model for Ebola Virus in Rural Sierra-Leone
Journal: IEEE African Journal of Computing ICT, 2015
Author: Ojugo, A. A., Allenotor, D., Oyemade, D. A., Yoro, R. E., Anujeonye, C. N.
The Implication of the River Niger Dredging on the Morphometric Analysis of Warri River Drainage Ba ...
Journal: Nasara Scientifique., 2005
Author: Onosemuode, Christopher
A Contingent Claim Approach to Bank Valuation
Journal: Journal of Mathematical Finance, 2014
Author: Enahoro Alfred Owoloko, Nicholas Amienwan Omoregbe, Michael Akindele Okedoye
Design, production and performance testing of two component cutting force dynamometer
Journal: Journal of the Nigerian Institution of Production Engineers, 1998
Author: DAGWA, I.M. and IBHADODE, A.O.A.
The Effect of Calcium Carbonate at Low Volume Fractions On the Mechanical Properties of Polypropylen ...
Journal: Journal of Engineering and Applied Sciences, , 2010
Author: Mgbemena, C.O., Ubani, N.O., Mgbemena, C.E.
Human exposure to endocrine-disrupting organochlorine and organophosphate pesticides in locally prod ...
Journal: International Journal of Environmental Health Research, 2024
Author: Tesi, G.O., Okpara, K.E., Tesi, J.N., Agbozu, I.E. and Techato, K.
Empirical Model for Bioethanol Production Process from Corn Stover Using Response Surface Methodolog ...
Journal: International Journal of Emerging Trends in Engineering and Development, 2016
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora, Eke Akachukwu Ben
Improving Physics Learning in Secondary Schools Using Metacognition.,
Journal: International Journal of Advances in Science and Technology, 2011
Author: Achufusi, N.N., Mgbemena, C.O., Mgbemena, C.E., Nwoye, A.
Synthesis, crystal structure, electrochemical and anti-corrosion studies of Schiff base derived from ...
Journal: Molecular structure, 2017
Author: Elias E. Elemike, Damian C. Onwudiwe, Henry U. Nwankwo, Eric C. Hosten
Performance evaluation of a prototype two component cutting force lathe dynamometer
Journal: journal and technology research, 2016
Author: A.O.Akii Ibhadode
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: International Journal of Machine Tools and Manufacture, 2004
Author: P.E. Amiolemhen, A.O.A. Ibhadode
Strategies to enhance Environmenatally Conscious Engineering safety Practices in Nigeria
Journal: journal of Engineering Studies, 2005
Author: Akpoturi P.E
Towards a Unified University Information System: Bridging the Gap of Data Interoperability
Journal: American Journal of Software Engineering, 2014
Author: Orobor Anderson Ise
The Influence of the use of ICT facilities on the academic achievement of Secondary School Physics.
Journal: International Journal of Advances in Science and Technology, , 2011
Author: Achufusi, N.N., Achufusi, U.N., Mgbemena, C.O., Mgbemena, C.E..
Characteristics of Some River Bed Sands and their Suitability for Making Colourless Glass
Journal: Ideal Journal of Engineering and Applied Science, 2016
Author: Edjere, O., Okpidi, T.J.I.
Effect of cutting fluids on tool wear during turning operations
Journal: Technical Transactions of the Nigerian Society of Engineers, 1999
Author: MUSA, M. and IBHADODE, A.O.A
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in industry, 2011
Author: C.U. ATUANYA, A.O.A. IBHADODE, A.C. IGBOANUGO
Antimicrobial activity of chemical bioactive compounds from the chloroform extract of the aerial par ...
Journal: International Journal of Biological and Chemical Sciences, 2016
Author: Christiana Ene OGWUCHE and Oghenekohwiroro EDJERE
Analysis of Coconut Ester(Biodiesel) and Fossil Diesel Blending: Properties and Corrosion Characteri ...
Journal: Nigeria Journal of Technology, NIJOTECH. , 2016
Author: Samuel , O.D, Ashiedu, F.I. and Oreko B.U.
Experiences and Lessons Learnt From Embedding Sustainability in Engineering
Journal: World Congress on Engineering Education, 2015
Author: Otanocha, O.B., Tomkinson, B., Dobson, H., Cummings, C., Sanchez-Romaguera, V. and Tomkinson, R.
Utilization of cellulosic cassava waste for bio-ethanol production
Journal: JECE, 2015
Author: Elias E.Elemike, Ojiefoh C.Oseghale, Anthony C.Okoye
Procedure for calculating shear rate in the reservoir in Niger Delta
Journal: Journal or Engineering and Energy Research, 2014
Author: Akpoturi Peters
Characterization and Creep Behaviour of Polypropylene/Calcium Carbonate Nanocomposites.
Journal: Journal of Applied Sciences Research, , 2010
Author: Mgbemena, C.O., Mgbemena, C.E., Ubani, N.O.
Carbon Nanotubes: The Building Blocks of Nanotechnology Development
Journal: J.Nanotech. Prog. Int. , 2016
Author: Boye E. T., Achadu J.O., Oreko B.U., Samuel O.D.
Effects of breadfruit seed hull ash on the microstructures and properties of AlSiFe alloy/breadfruit ...
Journal: Elsevier Science Direct- Results in Physics, 2012
Author: lC.U.Atuanya A.O.A.Ibhadode.M.Dagwa
Application of Markov Theoretical Model in Predicting Risk Severity and Exposure Levels of Workers i ...
Journal: International Journal of Mechanical Engineering and Applications, 2016
Author: Okwu Modestus Okechukwu Thaddeus C. Nwaoha Ombor Garrick
Performance Evaluation of Multicast Protocols
Journal: SAU Science-Tech Journal, 2017
Author: Akpojaro, J., Omogbhemhe, M., Oyemade, D. A.
Compositional, Geotechnical and Industrial Characteristics of Some Clay Bodies in Southern Nigeria
Journal: Jour. of Geography and Geology, 2013
Author: Onyeobi T.U.S Imeokparia, E.G. Ilegieuno O.A and Egbuniwe I.G
Development of a Manual Metal Arc Welding Flux from Local Raw Materials in Nigeria
Journal: Applied Mechanics and Materials, 2004
Author: Oyawale Festus Adekunle, Odior Andrew Oyakhobo, Ibhadode Akii
2D static failure prediction for critical stresses of an automobile tire sidewall using MATLAB PDETo ...
Journal: IOSR-Journal of Mechanical Civil Engineering,, 2014
Author: Ihueze, C.C., Mgbemena, C.O., Menon, A.R.R.
Risering of a Four-Cavity Die Production Mould by Convectional Method
Journal: Advanced Materials Research, 1994
Author: Prof. A.O. Akii Ibhadode, A.I. Igbafe and B.U. Anyata
An investigation of the efficacy of enhanced oil recovery by means of micro-organisms in Niger Delta ...
Journal: J. Pet. Gas Explor. Res., 2014
Author: - Ikporo Bibobra. and Okotie Sylvester.
The Use of Geoinformatics in Landscape Development Control: A Case Study of Temidire Estate in Ogbom ...
Journal: Ekpoma Journal of Social Sciences. , 2015
Author: Onosemuode C. Akhimien and Ayankanmi A. J
The use of Remote Sensing Imageries in Monitoring Changes in Surface Water in Lake Chad Drainage Bas ...
Journal: Nigeria Journal of Tropical Geography., 2008
Author: Onosemuode C. Akhimien F. O. and Kundu J..
Carbon Nanotube: The Building Blocks of Nanotechnology Development.
Journal: J.Nanotech. Prog. Int. (JONP) , 2016
Author: Boye, E.T., Achadu, J.O, Oreko, B.U and Samuel, O.D
A Typified Greedy Dynamic Programming Model for the MetaTrader Platform
Journal: Journal of Advances in Mathematical and Computational Sciences, 2020
Author: Oyemade, D. A.