PUBLICATIONS
Strategies to enhance Environmenatally Conscious Engineering safety Practices in Nigeria
Journal: journal of Engineering Studies, 2005
Author: Akpoturi P.E
SYNTHESIS AND OPTICAL PROPERTIES OF SELF-ASSEMBLED COORDINATION POLYMER OF Zn(II) IONS WITH PHENYLMA ...
Journal: Ife Journal of Science, 2015
Author: Mbonu, J. I.
The Pareto principle and Hazard model as tools for appropriate scheduled maintenance in a manufactur ...
Journal: African Journal of Science, Technology, Innovation and Development, 2016
Author: Fadeyi, J.A., Okwu, M.O., Mgbemena, C.O., Ezekiel, K.C. (2016).
Finite Element Analysis and Design Validation of High Pressure Gate Valve for a Typical Nigerian Oil ...
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: ThankGod E. Boye, Thaddeus C. Nwaoha, Adeyemi I. Olabisi
Antimicrobial activity of chemical bioactive compounds from the chloroform extract of the aerial par ...
Journal: International Journal of Biological and Chemical Sciences, 2016
Author: Christiana Ene OGWUCHE and Oghenekohwiroro EDJERE
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
Modelling and optimization of surface roughness and machining induced vibration 41Cr4 alloy structu ...
Journal: The International Journal Of Engineering And Science (IJES), 2016
Author: Izelu, C.O., Eze, S.C. and Samuel, Olusegun David
Application of Vertical Electrical Sounding to estimate aquifer characteristics of Ihiala and its en ...
Journal: ARPN Journal of Earth Sciences, , 2016
Author: 1. Obiajulu, O.O., Okpoko, E.I. Mgbemena, C.O.
The Assessment of Baseline Ecological Data for Environmental Management: A Case study of the Coasta ...
Journal: The Nigeria Academic Forum, 2004
Author: Onosemuode Christopher
High Power Picosecond Laser Surface Micro-texturing of H13 Tool Steel and Pattern Replication onto A ...
Journal: Lasers in Manufacturing and Materials Processing, 2016
Author: Otanocha, O.B., Li, L., Zhong, S. and Liu, Z
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in Industry, Vol 33, Iss 1, Pp 11-17 (2011), 2011
Author: A. C. Igboanugo / A. O. A. Ibhadode / C. U. Atuanya
Thermal stability of pulverized palm kernel shell (PKS) based friction lining material locally deve ...
Journal: ChemXpress , 2014
Author: Mgbemena, C.O., Mgbemena, C.E. Okwu, M.O.
Analytical Solution of MHD Free Convective Heat and Mass Transfer Flow in a Porous Medium.
Journal: The Pacific Journal of Science and Technology, 2013
Author: Akindele Michael Okedoye Ph.D.
Assessment of the Impacts of Refinery Effluent on the Physico-chemical Properties of Ubeji Creek, De ...
Journal: Journal of Environmental Analytical Toxicology , 2017
Author: Eunice OE, Frank O, Voke U, Godwin A
Design of DC-link Voltage Controller and Grid Current Controller in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
The Conceptualization of Baloguns (1980) Communication Model In Evaluating the Symbols used on Tou ...
Journal: Indian Journal of Multidisciplinary Research,, 2008
Author: Onosemuode C. Akhimien F. O. and Aliyu A. H
Improved Transmission Equation for Terrestrial FSO Link
Journal: International Journal of Electrical and Electronics Research , 2016
Author: Oluwole J. Famoriji, Kazeem B. Adedeji, and Oludare Y. Ogundepo
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
Development of a Computer-Aided Application for Analyzing ECG Signals and Detection of Cardiac Arrhy ...
Journal: International Journal of Applied Information Systems , 2015
Author: Akinlolu A. Ponnle and Oludare Y. Ogundepo
Design of a PV-Connected DC-DC Converter
Journal: International Journal of Emerging trends in Engineering and Development, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Towards an Enhanced Product Line Engineering Process Model
Journal: Benin Journal of Advances in Computer Science, 2019
Author: Oyemade, D. A, Onibere, E. A.
Manufacture of hand hacksaw blades form locally available mild stee
Journal: The Nigerian Engineer, 1991
Author: IBHADODE, A.O.A. and OJEAH, C.C
A Time Function Havlena and Odeh MBE Straight Line Equation
Journal: Onepetrol Journal, 2015
Author: Stanley Buduka., Biu Victor T., and Okotie Sylvester
Risering of a Four-Cavity Die Production Mould by Convectional Method
Journal: Advanced Materials Research, 1994
Author: Prof. A.O. Akii Ibhadode, A.I. Igbafe and B.U. Anyata
Application of re-refined used lubricating oil as base oil for the formulation of oil based drilling ...
Journal: Journal of Petroleum Technology and Alternative Fuels, 2013
Author: Oghenejoboh K. M., Ohimor E. O. and Olayebi O.
Design and Manufacture of a 30-ton Hydraulic Press
Journal: Mechanical Engineering Department, Federal University of Technology , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Problems of Environmental Pollution and Control in the Nigeria Petroleum Industry
Journal: journal of research in Engineering and Environmental Studies, 2006
Author: Akpoturi P.E and Ndukwe J.O
The Impact of 3D Printing Technology to the Nigerian Manufacturing GDP
Journal: Modern Mechanical Engineering, 2018
Author: A. Balogun, V. , B. Otanocha, O. and O. Ibhadode, A.
Design of Maximum Power Point Tracker (MPPT) and Phase Locked Loop (PLL) in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Numerical Investigation of Thermo-Mechanical Behaviour of Ball Grid Array Solder Joint at High Tempe ...
Journal: ADVANCED MATERIALS RESEARCH -ZUG-, 2012
Author: Amalu, E.H. / Ekere, N.N. / Bhatti, R.S. / Mallik, S. / Takyi, G. / Ibhadode, A.O.A.
Improved Correlation for Predicting Stock Tank Gas-Oil Ratio in Niger Delta
Journal: Onepetrol Journal, 2016
Author: Hilary Okeke. and Okotie Sylvester
Effects of Turning Parameters on Metal Removal and Tool Wear Rates for Low Carbon Steel
Journal: Nigerian Journal of Technology (NIJOTECH), 2016
Author: Mgbemena C.O Mgbemena C.E, Etebenumeh G, and Ashiedu F. I.
Thermal Cycling Effects on the Fatigue Behaviour of Low Carbon Steel.
Journal: Journal of Minerals and Materials Characterization and Engineering, , 2011
Author: Mgbemena, C.O., Agbadua, S.A., Mgbemena, C.E., Chima, L.O.
2-Imino-(3,4-dimethoxybenzyl) ethanesulfonic acid Schiff base anchored silver nanocomplex mediated b ...
Journal: JART, 2016
Author: Elias E. Elemike, Enock O. Dare, Inyang D. Samuel,Jude C. Onwuka
The Role of Solid Mineral Mapping for Sustainable Development in Nasarawa State
Journal: M.E Ufuah and R.O. Olomo [ed.] Cartography and GIS for Sustainable Solid Mineral Development in Nigeria. A Publication, 2005
Author: Onosemuode Christopher
Some physical and mechanical properties of asbestosfree experimental brake pad
Journal: JOURNAL OF RAW MATERIALS RESEARCH , 2006
Author: I M. Dagwa, A. O. A. Ibhadode
APPLICATION OF BOX-BEHNKEN DESIGN FOR THE OPTIMIZATION OF STEAM TURBINE EFFICIENCY
Journal: World Journal of Engineering Research and Technology, 2017
Author: Eyere Emagbetere, Festus I. Ashiedu, Olusegun D. Samuel and Modestus O. Okwu
Work Flow for Reservoir Study and Challenges
Journal: Onepetrol Journal, 2015
Author: Okotie Sylvester. and Stanley Buduka. and Ikporo Bibobra
DETECTION OF CRACK LOCATION AND SIZE IN STRUCTURES USING HIGHER HARMONICS OF EXCITED FREQUENCY
Journal: Research Journal in Engineering and Applied Sciences, 2013
Author: Ezekiel Kingsley C., Okwu Modestus O., Johnson A. Fadeyi
Microbial community structure of an oil polluted site in Effurun, Nigeria
Journal: International Research Journal of Public and Environmental Health, 2017
Author: Tega L. Ataikiru1,Beatrice F. Okorhi-Damisa1 and Jemeelah I. Akpaiboh1
Characterization and Creep Behaviour of Polypropylene/Calcium Carbonate Nanocomposites.
Journal: Journal of Applied Sciences Research, , 2010
Author: Mgbemena, C.O., Mgbemena, C.E., Ubani, N.O.
An Object Selection Model for a 3D Gamming Environment
Journal: IEEE African Journal of Computing ICT, 2015
Author: Allenotor, D., Ojugo, A. Oyemade, D.
The Effect of using mastery learning approach on academic achievement of Senior Secondary school II ...
Journal: Elixir Edu. Tech, 2012
Author: Achufusi, N.N. Mgbemena, C.O.
An Optimized Parallel Hybrid Architecture for Cryptocurrency Mining
Journal: Computing, Information Systems, Development Informatics Allied Research Journal, 2021
Author: David Allenotor, David Ademola Oyemade
MONITORING THE PRODUCTION PROCESS OF LASCTIC ACID BACTERIA USING HPLC
Journal: nternational Journal of Health and Medicine Vol 1(2) Jul-Sep 2016, 2016
Author: OKORHI FOLAWE BEATRICE BASSEY UWEM
Removal of Some Heavy Metals from Incinerator Bottom Ash Using Coconut (Cocos Nucifera) Husk
Journal: International Journal of Chemistry, 2016
Author: Doris F. Ogeleka, Harrison E. Avrukpere, Elias E. Elemike, Oghenekohwiroro Edjere, Iwekumo E. Agbozu
APPLICATION OF LINEAR PROGRAMMING MODEL AND SENSITIVITY ANALYSIS IN MULTI-PRODUCT MULTI-DESTINATION ...
Journal: Canadian International Journal of Science and Technology, 2017
Author: Modestus O. Okwu,, F. I. Ashiedu, Joachim Gidiagba, Adedoyin Adesuji
Investigation of plume dynamics during picosecond laser ablation of H13 steel using high-speed digit ...
Journal: Applied Physics A, 2017
Author: Krste Pangovski, Omonigho B. Otanocha, Shan Zhong, Martin Sparkes, Zhu Liu, William ONeill, Lin Li
The Communicative Efficiency of Maps in Tourism Development
Journal: Journal of Research in Tourism., 2007
Author: Onosemuode, Christopher
Effects of Reinforcement Combinations of Calcium Carbonate nanofiller on the Mechanical and Creep p ...
Journal: Journal of Minerals and Materials Characterization and Engineering, , 2010
Author: Ihueze, C.C. Mgbemena, C.O.