PUBLICATIONS
DISTRIBUTION OF PHTHALATE ESTERS IN UNDERGROUND WATER FROM POWER TRANSMISSION SITES IN WARRI METROPO ...
Journal: Journal of applied science and environmental management, 2016
Author: EDJERE, O ASIBOR, IG BASSEY, U
Deploying an IoT-Enabled Realtime Fire Detection and Alert Model for Residential Homes
Journal: FUPRE Journal of Scientific Research, 2024
Author: 6. Ekeke, J., Oyemade, D. A.
Design and Finite Element Analysis of Double - Acting, Double - Ends Hydraulic Cylinder for Industri ...
Journal: American Journal of Engineering Research (AJER), 2017
Author: 1. ThankGod E. Boye, Adeyemi, I. Olabisi, Eyere E. Emagbetere
Preliminary Design for Solid Waste Incineration for Power Generation in Benin Metropolis, Nigeria
Journal: ADVANCED MATERIALS RESEARCH -ZUG-, 2013
Author: Igbinomwanhia, D.I. / Ibhadode, O.O. / Akhator, P.E.
Finite Element Analysis and Design Validation of High Pressure Gate Valve for a Typical Nigerian Oi ...
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: ThankGod E. Boye, Thaddeus C. Nwaoha and Adeyemi I. Olabisi
Eco-friendly synthesis of AgNPs using Verbascum thapsus extract and its photocatalytic activity
Journal: Matt lett, 2016
Author: Elias E. Elemike, Damian C. Onwudiwe, Zimbili Mkhize
Physico-Chemical and Bacteriological Assessment of Abattoir Effluents and its effect on Agbarho Rive ...
Journal: Nigerian Journal of Applied Science, 2017
Author: Asibor, I., Edjere, O., and Ofejiro, P.
Evaluation of Pure Aluminium Inoculated with Varying Grain Sizes of an Agro-waste based Inoculant
Journal: Advances in Science, Technology and Engineering Systems Journal (ASTESJ), 2017
Author: Adeyemi I. Olabisi, Thankgod E. Boye, Emagbetere Eyere
Laser Surface Micro/nano Patterning for Improving Aerodynamic Performance
Journal: Ph. D Thesis, 2015
Author: Otanocha, O.B
Optimization of Nigerian Restaurant Waste Cooking Biodiesel Reaction Parameters using Response Surfa ...
Journal: International Journal of Energy Optimization and Engineering, 2014
Author: Waheed, M.A., Samuel, O.D., Bolaji, B.O. and Dairo, O.U.
A comparative study of artificial neural network (ANN) and adaptive neuro-fuzzy inference system (AN ...
Journal: International Journal of Engineering Business Management, 2018
Author: Modestus Okwu, Olufemi Adetunji
Effects of Self-regulated learning and Metacognitive learning cycle on the academic achievement of ...
Journal: Open Journal of Advanced Engineering Techniques, , 2013
Author: Inomiesa, E.A., Achufusi, N.N. Mgbemena, C.O.
Tool wear of some hacksaw blades
Journal: Journal of the Nigerian Institution of Production Engineers, 1994
Author: IBHADODE, A.O.A
Introduction to Manufacturing Technology
Journal: Open Journal of Energy Efficiency, 2013
Author: Mala Abba-Aji, Vincent Ogwagwu, Bukar Umar Musa, Prof. A.O. Akii Ibhadode (Contributor)
Existence and uniqueness, and asymptotic stability analysis of solution of a retarded equation model ...
Journal: icastor Journal of Mathematical Sciences, 2010
Author: Igobi, D. K. and Egwurube, M. and Musa, Samuel and Oyemade, D. A.
Tourist Sites in Delta State, Nigeria
Journal: Achieving Millennium Development Goals Through Mapping, David A. Musa and W.D.C Wokoma (ed), 2007
Author: Onosemuode, C .
Picosecond laser surface micro-texturing for the modification of aerodynamic and dust distribution c ...
Journal: Cogent Engineering , 2016
Author: Omonigho B. Otanocha, Li Lin, Yuanye Zhou, Shan Zhong Liu Zhu
Design of a PV-Connected DC-DC Converter
Journal: International Journal of Emerging trends in Engineering and Development, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
On the Issue of Dualism in Cartography
Journal: Anyigba Journal of Arts and Humanities, 2004
Author: Ufuah M.E, Onosemuode C
A Validation Method of Computational Fluid Dynamics (CFD) Simulation against Experimental Data of Tr ...
Journal: American Journal of Engineering Research (AJER) , 2017
Author: Boye, Thankgod, Nwaoha, T. C., Samuel, O. D and Ashiedu, F. I.
Using EF, PLI AND IGEO for the assessment of heavy metal pollution and sediment quality of Asejire R ...
Journal: International Journal of Environment and Pollution Research, 2015
Author: Asibor, I. G., Edjere, O., Adeniyi, F. and Ogundele, O.
Material Requirement Planning of MISO Production Process using Transfer Function: A Case Study of So ...
Journal: Journal of the Nigeria Association of Mathematical Physics. , 2016
Author: S. Okiy, B.U. Oreko and C.C. Nwobi-Okoye
Development of home made crucibles for traditional metal casting
Journal: Journal of the Nigerian Institution of Production Engineers, 1998
Author: IBHADODE, A.O.A.
The Implication of the River Niger Dredging on the Morphometric Analysis of Warri River Drainage Ba ...
Journal: Nasara Scientifique., 2005
Author: Onosemuode, Christopher
Implementation of Koha Integrated Library Management Software (ILMS): The Babcock University Experie ...
Journal: Canadian Social Science, 2012
Author: Saturday U. Omeluzor, Olugbenga Adara, Madukoma Ezinwayi, Itunu A. Bamidele and Felicia Oby Umahi
Effects of Sodium Hydroxide Concentration on the Physical Properties of Zeolite Produced from Local ...
Journal: European Journal of Scientific Research, 2011
Author: Oghenejoboh, K. M. and Ohimor, E. O.
Improved Correlation for Predicting Stock Tank Gas-Oil Ratio in Niger Delta
Journal: Onepetrol Journal, 2016
Author: Hilary Okeke. and Okotie Sylvester
The Design of a Manual Table-Top Grinder,
Journal: Scholars Journal of Engineering and Technology,, 2014
Author: Abdulmalik, I.O., Michael, A., Akonyi, N.S., Mgbemena, C.O., Aaron-Orsu, C.J Ambali, A.O.
THE SECURITY PROVIDER... Social Responsibility and Customer Satisfaction
Journal: Security, 2020
Author: Onakpoma Oboroghenerukohwo
Compositional, Geotechnical and Industrial Characteristics of Some Clay Bodies in Southern Nigeria
Journal: Jour. of Geography and Geology, 2013
Author: Onyeobi T.U.S Imeokparia, E.G. Ilegieuno O.A and Egbuniwe I.G
Assessment of the Impacts of Industrialization in Esan Land, Edo State, Nigeria
Journal: Continental Journal of Environmental Design and Management , 2012
Author: Akhimien F.O, Onosemuode C and Ibhadode C
Effect of Turning Parameters on Metal Removal and Tool Wear Rates of AISI 1018 Low Carbon Steel.
Journal: Nigerian Journal of Technology,, 2016
Author: Mgbemena, C.O., Mgbemena, C.E., Ashiedu, F.I. Etebenumeh, G. O.
A survey of traditional foundries and forge shops and a training programme for traditional metal cra ...
Journal: Benin Journal of Educational Studies, 1999
Author: IBHADODE, A.O.A
APPLICATION OF CASSAVA PEELS ACTIVATED CARBON IN THE TREATMENT OF OIL REFINERY WASTEWATER A COMPARA ...
Journal: Journal of Ecological Engineering, 2016
Author: Kigho Moses Oghenejoboh, Smith Orode Otuagoma, Evuensiri Onogwharite Ohimor
The Advocacy of GIS in the Police Force for Crime Detection, Prevention and Control: A Case Study o ...
Journal: The Nigeria Academic Forum, 2003
Author: Onosemuode Christopher
Assessment of the Problems Militating Against Tourism Development in Delta State, Nigeria.
Journal: Confluence Journal of Environmental Studies, 2006
Author: Onosemuode, C and Usideme, P.O (2006)
Development of a Computer-Aided Application for Analyzing ECG Signals and Detection of Cardiac Arrh ...
Journal: International Journal of Applied Information Systems , 2015
Author: Oludare Y Ogundepo and Akinlolu A Ponnle
The use of Remote Sensing Imageries in Monitoring Changes in Surface Water in Lake Chad Drainage Bas ...
Journal: Nigeria Journal of Tropical Geography., 2008
Author: Onosemuode C. Akhimien F. O. and Kundu J..
Computational Modeling of Extracellular Matrix Protein Stamping on Hard Substrates for Biomedical Mi ...
Journal: Advances in Life Science and Technology, , 2014
Author: Aduloju, S.C., Nima, R., Mgbemena, C.O., Soboyejo, W.O.
Virtual Remote Control System Using Embedded Systems with Internet of Things
Journal: FUPRE Journal of Scientific and Industrial Research (FJSIR), 2024
Author: Nwachukwu, K., Oyemade, D. A.
Design and Manufacture of a 30-ton Hydraulic Press
Journal: Mechanical Engineering Department, Federal University of Technology , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
An Alternative Algorithm and R Programming Implementation for Least Absolute Deviation Estimator of ...
Journal: Journal of Modern Applied Statistical Methods , 2016
Author: Ogundele Suraju Olaniyi, J. I. Mbegbu and C. R. Nwosu
A Method for Stimulation Candidate Well Selection
Journal: International Journal of Engineering and Technology, 2015
Author: undefined!
A Financial Option Model for Pricing Cloud Computational Resources Based on Cloud Trace Characteriza ...
Journal: IEEE African Journal of Computing ICT, 2015
Author: Allenotor, D., Oyemade, D., Ojugo, A.
Diamond Bit Selection for Horizontal Wells
Journal: journal of Engineering Research and Sustainable Development, 2009
Author: Akpoturi Peters and Onwuachi- Iheagwara P .N
Distribution of Phthalate Esters in Underground Water from Power Transmission Sites in Warri Metropo ...
Journal: Journal of Applied Sciences and Environmental Management, 2016
Author: Edjere, O., Asibor, I.G. and Bassey, U.
A Critical review of in-situ transesterification process for Biodiesel Production.
Journal: The Pacific Journal of Science and Technology, 2012
Author: Samuel, O.D. and Dairo, O.U.,
Online Information Behaviour of Women on Household Products, Appliances and FashionELTA STATE, NIGER ...
Journal: Ebonyi Journal of Library and Information Science, 2015
Author: Saturday U. Omeluzor, Chima Evans Otuza and Alarape Asimi Akibu
Manufacture of metal-arc welding electrodes from locally available materials
Journal: Journal of the Nigerian Institution of Production Engineer, 1993
Author: OKOH, I.G. and IBHADODE, A.O.A
Towards an Enhanced Product Line Engineering Process Model
Journal: Benin Journal of Advances in Computer Science, 2019
Author: Oyemade, D. A, Onibere, E. A.