PUBLICATIONS
The Influence of Process Variables on Load and Accuracy When Forging in a Completely Closed Cavity D ...
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Institution of Mechan, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
The Advocacy of GIS in the Police Force for Crime Detection, Prevention and Control: A Case Study o ...
Journal: The Nigeria Academic Forum, 2003
Author: Onosemuode Christopher
Laser Surface Micro/nano Patterning for Improving Aerodynamic Performance
Journal: Ph. D Thesis, 2015
Author: Otanocha, O.B
Work-Trips Generation in Warri and Environs: A Spatial Perspective
Journal: Journal of Environmental Studies, 2007
Author: Onosemuode, C and Onosemuode, K. E . .
Crystal structure of tetraaquabis(3,5-diamino- 4H-1,2,4-triazol-1-ium)cobalt(II) bis[bis(pyridine-2, ...
Journal: Acta Cryst, 2015
Author: Atim Johnson, Justina Mbonu, Zahid Hussain, Wan-Sin Lohe and Hoong-Kun Funf,
Evaluation of the Cost and Effect of Industrial Accidents
Journal: European Journal of Scientific Research, 2015
Author: Yusuf, T.A., Ismaila, S.O., Kuye, S.I. and Samuel, O.D.
Sorption Trend of Crude petroleum and Petroleum Products in NIger Delta Soils
Journal: journal of Research in Engineering, 2012
Author: Akpoturi P E, Nwakaudu S and Nwogu N
Introduction to Manufacturing Technology
Journal: Open Journal of Energy Efficiency, 2013
Author: Mala Abba-Aji, Vincent Ogwagwu, Bukar Umar Musa, Prof. A.O. Akii Ibhadode (Contributor)
A comparative study of artificial neural network (ANN) and adaptive neuro-fuzzy inference system (AN ...
Journal: International Journal of Engineering Business Management, 2018
Author: Modestus Okwu, Olufemi Adetunji
Application of Linear Programming Model and Sensitivity Analysis in Multi Source Multi Destination S ...
Journal: Canadian International Journal of Science and Technology, Ontario Canada, 2017
Author: M. O.Okwu, F.I Ashiedu, Joachim Gidiagba, and A. Adedoyin
Sequestering of Fe and Pb ions from Wastewater by Canarium schweinfurthii after carbonization and ch ...
Journal: J. Appl. Sci. Environ. Manage., 2016
Author: BASSEY UWEM, EDJERE OGHENEKOHWIRORO, OTOLO SOLOMON EBIYE
Simulation and experimental verification of completely closed cavity die forging on a mechanical pre ...
Journal: Proc. Institution of Mechanical Engineers, 1989
Author: IBHADODE, A.O.A. and DEAN, T.A
The Physiochemical Effects of Leachates on Ground water within Okpuno-Egbu Umudim Dumpsite Nnewi, An ...
Journal: Daffodil International University Journal of Science and Technology, , 2013
Author: Momoh, S.O., Mgbemena, C.O., Agbadua, S.A, Matthew, D.O.
Advances in materials and systems technologies
Journal: Advanced materials research, 2007
Author: A O Ibhadode
The Applied Geochemist and the Challenges of Georesource Evaluation for Sustainable development and ...
Journal: University of Benin, Benin City, 2015
Author: Imeokparia, E.G.
Performance evaluation of a prototype two component cutting force lathe dynamometer
Journal: journal and technology research, 2016
Author: A.O.Akii Ibhadode
Experiences and Lessons Learnt From Embedding Sustainability in Engineering
Journal: World Congress on Engineering Education, 2015
Author: Otanocha, O.B., Tomkinson, B., Dobson, H., Cummings, C., Sanchez-Romaguera, V. and Tomkinson, R.
Problems and solutions involved in oil processing from kernel seeds.
Journal: The Pacific Journal of Science and Technology, 2012
Author: Samuel, O.D and Alabi, A.G.F
The Pareto principle and Hazard model as tools for appropriate scheduled maintenance in a manufactur ...
Journal: African Journal of Science, Technology, Innovation and Development, 2016
Author: Fadeyi, J.A., Okwu, M.O., Mgbemena, C.O., Ezekiel, K.C. (2016).
A Novel Framework for Student Result Computation as a Cloud Computing Service
Journal: American Journal of Systems and Software, 2015
Author: Orobor Anderson Ise
On a Method for Die Container Design in Completely Closed Die Forging
Journal: TRANSACTIONS- AMERICAN SOCIETY OF MECHANICAL ENGINEERS JOURNAL OF MECHANICAL DESIGN, 1997
Author: Ibhadode, A. O. A.
Deploying an IoT-Enabled Realtime Fire Detection and Alert Model for Residential Homes
Journal: FUPRE Journal of Scientific Research, 2024
Author: 6. Ekeke, J., Oyemade, D. A.
Assessment of the Impacts of Refinery Effluent on the Physico-chemical Properties of Ubeji Creek, De ...
Journal: Journal of Environmental Analytical Toxicology , 2017
Author: Eunice OE, Frank O, Voke U, Godwin A
A dynamic level technical indicator model for oil price forecasting
Journal: Global Journal of Computer Science and Technology: G Interdisciplinary, 2021
Author: David Ademola Oyemade, David Enebeli
Towards an Enhanced Product Line Engineering Process Model
Journal: Benin Journal of Advances in Computer Science, 2019
Author: Oyemade, D. A, Onibere, E. A.
Tourist Sites in Delta State, Nigeria
Journal: Achieving Millennium Development Goals Through Mapping, David A. Musa and W.D.C Wokoma (ed), 2007
Author: Onosemuode, C .
SYNTHESIS AND OPTICAL PROPERTIES OF SELF-ASSEMBLED COORDINATION POLYMER OF Zn(II) IONS WITH PHENYLMA ...
Journal: Ife Journal of Science, 2015
Author: Mbonu, J. I.
LED Light a futuristic Technology for African Rural Electrification
Journal: Journal of Innovative Systems Design and Engineering, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles, ONYAN AARON OKIEMUTE
Adsorption and desorption performances of Eichhornia crassipes (water hyacinth) roots and leaves pow ...
Journal: Ovidius University Annals of Chemistry, 2025
Author: Tesi, G.O., Ejeromedoghene, O., Alli, Y.A., Okunoja, H.B. and Ipeaiyeda, A.R.
Advances in materials and systems technologies IV : selected, peer reviewed papers from the 4th Inte ...
Journal: Advanced materials research, 2013
Author: Ibhadode, A. O. Akii / Aluyor, E.O.
Optimal Reliability and Cost of Power Distribution: A case of Power Holding Company of Nigeria.
Journal: International Journal of Engineering Science and Technology, , 2011
Author: Chinwuko, E.C., Nwuba, E.I.U., Mgbemena, C.O.
APPLICATION OF CASSAVA PEELS ACTIVATED CARBON IN THE TREATMENT OF OIL REFINERY WASTEWATER A COMPARA ...
Journal: Journal of Ecological Engineering, 2016
Author: Kigho Moses Oghenejoboh, Smith Orode Otuagoma, Evuensiri Onogwharite Ohimor
Modeling and Optimization of Hard Turning Operations on 41Cr4 Alloy Steel using Response Surface Met ...
Journal: International Journal of Mechanical Engineering and Applications (IJMEA), 2016
Author: Izelu C. O., Ezeh S. C. and Ashiedu F. I.
Small and Meduim Scale Enterprises- Catalyst for National Development in Nigeria
Journal: Journal of Scientific and Industrial Studies, 2007
Author: Akpoturi P.E
Environmental Impact Of Mining On Agricultural Activities: A Case Study Of Bukuru, Jos.
Journal: International Journal Of Sustainable Development., 2010
Author: Onosemuode C. Akhimien F. O
Advances in materials and systems technologies III
Journal: Advanced materials research, 2012
Author: Prof. A.O. Akii Ibhadode
Development and Evaluation of Maize Husks (Asbestos-free) Based Brake Pad
Journal: Industrial Engineering Letters, 2015
Author: Nuhu A. Ademoh and Adeyemi, I. Olabisi.
A combined algorithm approach to fuel consumption rate analysis and prediction of sea-worthy diesel ...
Journal: Journal of Engineering for The Maritime Environment, 2016
Author: Thaddeus C Nwaoha Garrick Ombor and Modestus O Okwu
Leachate Characterization and Leachate Pollution Index from Landfill Dump Sites in Warri Metropolis, ...
Journal: International Letters of Natural Sciences, 2016
Author: Asibor, G. and Edjere, O.
Fuzzy Based System for Power Consumption Prediction
Journal: Journal of Engineering Science and Computing, , 2017
Author: EMAGBETERE, Eyere, BOYE, E. ThankGod, OGHENEVWAIRE, S. Iyabo
Effects of Reinforcement Combinations of Calcium Carbonate nanofiller on the Mechanical and Creep p ...
Journal: Journal of Minerals and Materials Characterization and Engineering, , 2010
Author: Ihueze, C.C. Mgbemena, C.O.
Performance characteristics and analysis of tailored Natural Rubber/Organo-kaolin Composites
Journal: International Journal of Plastics Technology, 2016
Author: Mgbemena, C.O., Ihueze, C.C. Menon, A.R.R.
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
Impact of PCBs from Transmission Oil Discharges: A Case Study of Power Distribution Installations in ...
Journal: Nigerian Journal of Applied Science, 2016
Author: Edjere, O., Asibor, G. and Otolo, S.
Trace Determination of Phthalates in ground water Sample by GC-MS using specific sample concentratio ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences, 2016
Author: Edjere, O., Pollard, P., and Maier, U.
Automated Student Attendance Management System Using Face Recognition
Journal: International Journal of Educational Research and Information Science, 2018
Author: Ofualagba Godswill, Omijie Osas, Orobor Anderson, Ibhadode Oseikhuemen, Odiete Etse
Predicting Diffusion Dynamics Of The Coronavirus In Nigeria Through Ties-Strength Threshold On A Cas ...
Journal: Technology Reports of Kansai University, 2020
Author: . Ojugo, A. A., Oyemade, D. A.
ENTROPY GENERATION IN COMBINED HEAT AND MASS TRANSFER EFFECT ON MHD FREE CONVECTION FLOW PAST AN OSC ...
Journal: Journal of Mathematics and Science (JMS) , 2015
Author: OKEDOYE A. M
The Use of Geoinformatics Techniques in Site Selection for solid Waste Dump A Case Study of Warri an ...
Journal: International Journal of Science and Research (IJSR), 2017
Author: Christopher Onosemuode and Omorogbe Osemwegie
Design and Finite Element Analysis of Double - Acting, Double - Ends Hydraulic Cylinder for Industri ...
Journal: American Journal of Engineering Research (AJER), 2017
Author: 1. ThankGod E. Boye, Adeyemi, I. Olabisi, Eyere E. Emagbetere