PUBLICATIONS
The Effect of Calcium Carbonate at Low Volume Fractions On the Mechanical Properties of Polypropylen ...
Journal: Journal of Engineering and Applied Sciences, , 2010
Author: Mgbemena, C.O., Ubani, N.O., Mgbemena, C.E.
Plant-mediated biosynthesis of silver nanoparticles by leaf extracts of Lasienthra africanum and a s ...
Journal: Bull Mat Sci, 2017
Author: Elias E. Elemike, Damian C.Onwudiwe, Arijeh Olayinka, Henry U.Nwankwo
The Pareto principle and Hazard model as tools for appropriate scheduled maintenance in a manufactur ...
Journal: African Journal of Science, Technology, Innovation and Development, 2016
Author: Fadeyi, J.A., Okwu, M.O., Mgbemena, C.O., Ezekiel, K.C. (2016).
Design of Maximum Power Point Tracker (MPPT) and Phase Locked Loop (PLL) in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
APPLICATION OF LINEAR PROGRAMMING MODEL AND SENSITIVITY ANALYSIS IN MULTI-PRODUCT MULTI-DESTINATION ...
Journal: Canadian International Journal of Science and Technology, 2017
Author: Modestus O. Okwu,, F. I. Ashiedu, Joachim Gidiagba, Adedoyin Adesuji
Markov Chain Analysis for Inbreeding and their Genetic Effects.
Journal: International Journal of Numerical Mathematics., 2009
Author: Olaruwanju S.O, Onosemuode C. and Zubair M.A
Compositional, Geotechnical and Industrial Characteristics of Some Clay Bodies in Southern Nigeria
Journal: Jour. of Geography and Geology, 2013
Author: Onyeobi T.U.S Imeokparia, E.G. Ilegieuno O.A and Egbuniwe I.G
Determination of Optimum Welding Flux Composition Using the Bend Strength Test Technique
Journal: Advanced Materials Research , 1994
Author: Joseph I. Achebo, A.O. Akii Ibhadod
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in Industry, Vol 33, Iss 1, Pp 11-17 (2011), 2011
Author: A. C. Igboanugo / A. O. A. Ibhadode / C. U. Atuanya
Optimizing the Output Current for a DC-DC Converter
Journal: Journal of Control Theory and Informatics, International Institute for Science, Technology and Education, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles and Onyan Aaron Okiemute
Computational Approach to Fracture Modelling of Polypropylene/Talc Composites.
Journal: Journal of Minerals and Materials Characterization and Engineering, , 2012
Author: Mgbemena, C.O., Okoye, O.A.
Problems of Environmental Pollution and Control in the Nigeria Petroleum Industry
Journal: journal of research in Engineering and Environmental Studies, 2006
Author: Akpoturi P.E and Ndukwe J.O
Assessment of the activities of scavengers and their economic impacts in waste recovery in Warri met ...
Journal: International Research Journal of Public and Environmental Health, 2017
Author: Asibor Godwin, Edjere Oghenekohwiroro
Development of home made crucibles for traditional metal casting
Journal: Journal of the Nigerian Institution of Production Engineers, 1998
Author: IBHADODE, A.O.A.
Sorption of Mn(II) ions from wastewater using dried and blended water hyacinth (Eichhornia crassipes ...
Journal: Journal of the Turkish Chemical Society Section A: Chemistry,, 2024
Author: Tesi, G.O., Ejeromedoghene, O., Kpomah, B. and Ipeaiyeda, A.R.
Boyer Moore string-match framework for a hybrid short message service spam filtering technique
Journal: International Journal of Artificial Intelligence (IJ-AI), 2021
Author: Arnold Adimabua Ojugo, David Ademola Oyemade
Modeling Hyperelastic Behavior of Natural Rubber/Organomodified Kaolin Composites Oleochemically Der ...
Journal: Journal of Scientific Research Reports, , 2014
Author: Ihueze,C.C Mgbemena,C.O.
Development of water hyacinth briquetting machine
Journal: International Journal of Scientific Research in Information Systems and Engineering (IJSRISE), 2016
Author: Modestus Okwu, Adeyemi I. Olabisi, ThankGod E. Boye, Ezurike O. Benjamin
Development of useful products from agro-waste and polythene bags
Journal: Conference on New Products and Technologies for Small and Medium Enterprises,, 2001
Author: IBHADODE, A.O.A
Modeling and Optimization of Hard Turning Operations on 41Cr4 Alloy Steel using Response Surface Met ...
Journal: International Journal of Mechanical Engineering and Applications (IJMEA), 2016
Author: Izelu C. O., Ezeh S. C. and Ashiedu F. I.
Solving For Computational Intelligence the Timetable-Problem
Journal: , Advances in Multidisciplinary Research Journal, 2016
Author: Ojugo, A. A., Oyemade, D. A., Allenotor, D.
Optimization of Nigerian Restaurant Waste Cooking Biodiesel Reaction Parameters using Response Surfa ...
Journal: International Journal of Energy Optimization and Engineering, 2014
Author: Waheed, M.A., Samuel, O.D., Bolaji, B.O. and Dairo, O.U.
The Evaluation of Domestic Energy need and Consumption Pattern in Kokona Local Government Area, Nasa ...
Journal: Journal of Environmental Studies., 2007
Author: Onosemuode, C and Onosemuode, S.A
The Instrumentality of Manufacturing in Translating Poverty to Prosperity
Journal: Inaugural Lecture Series, 2006
Author: Ibhadode, A.O.A.
Time-Lapse Seismic Acquisition in the Niger Delta: Challenges and Successes
Journal: Geosciences, 2017
Author: G. I. Alaminiokuma, W. N. Ofuyah
The influence of Creep on the Mechanical properties of Calcium Carbonate Nanofiller Reinforced Polyp ...
Journal: Journal of Minerals and Materials Characterization and Engineering. , 2011
Author: Ihueze, C.C., Mgbemena, C.O., Ugwu, S.
Integrating Remote Sensing and GIS for Environmental Management
Journal: The Built Environment Journal, 2005
Author: Ufuah M.E, and Onosemuode C
PERFORMANCE OF AN AUTOMOTIVE BUMPER FROM LALLOH 2 (Corchorustriden L.) PLANT FIBRE REINFORCED EPOXY ...
Journal: Nigerian Journal of Technology (NIJOTECH), 2016
Author: M Sumaila, AOA Ibhadod
Modified Screw Jack for Lifting Operation in Industrial Setting
Journal: International Journal of Engineering and Technologies, 2017
Author: Benjamin Ezurike, Modestus O. Okwu
Phthalate ester plasticizers in Orogodo River Delta State and their potential health effects
Journal: International Journal of Environment and Pollution Research, 2015
Author: Edjere, O., Asibor, I. G. and Otolo, S. E.
Design and Manufacture of a 30-ton Hydraulic Press
Journal: A U J.T. 14(3): 196-200 (Jan. 2011) Technical Report , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Material Requirement Planning of MISO Production Process using Transfer Function: A Case Study of So ...
Journal: Journal of the Nigeria Association of Mathematical Physics. , 2016
Author: S. Okiy, B.U. Oreko and C.C. Nwobi-Okoye
Petrological and Geochemical Characteristics of some Mesozoic granitic rocks hosting Sn-Nb-W-U miner ...
Journal: Petrogenesis and Minealization of Ganitoids Science Press, Beijing, China, 1992
Author: Imeokparia, E.G.
The Applied Geochemist and the Challenges of Georesource Evaluation for Sustainable development and ...
Journal: University of Benin, Benin City, 2015
Author: Imeokparia, E.G.
Preliminary Design for Solid Waste Incineration for Power Generation in Benin Metropolis, Nigeria
Journal: ADVANCED MATERIALS RESEARCH -ZUG-, 2013
Author: Igbinomwanhia, D.I. / Ibhadode, O.O. / Akhator, P.E.
Hyperelastic modelling and limit stress prediction of a P195/55 R16 85H Radial tire developed from N ...
Journal: American Journal of Material Sciences and Applications., 2014
Author: Ihueze, C.C, Mgbemena, C.O.
Electrical Properties Correlations for The Niger Delta Depobelts
Journal: Petroleum Technology Development Journal, 2016
Author: Oscar I. O. Ogali, Julius O. Otiko, Wilfred C. Okologume
Relationship between alteration rare-earth element distribution and mineralization of the Ririwai Zn ...
Journal: African Jour. Sci. and Technology, , 1990
Author: Imeokparia, E.G., and Chalokwu, C.I
Geochemistry and Environmetric Approaches to Estimating Pollution Impacts on soils around Okaba Coa ...
Journal: Brit. Jour of Applied Science and Technology, 2014
Author: Ameh, E.G. Imasuen, I.O. and Imeokparia, E.G
Technical Properties of some plant fibres compared with glass fibre
Journal: International Journal of Engineering research in Affrica, 2014
Author: M. Sumaila, Ao. Ibhadode
High Power Picosecond Laser Surface Micro-texturing of H13 Tool Steel and Pattern Replication onto A ...
Journal: Lasers in Manufacturing and Materials Processing, 2016
Author: Otanocha, O.B., Li, L., Zhong, S. and Liu, Z
Static Analysis of a P195/55 R16 85H Radial Tire Developed from Natural rubber/Tea Seed Oil (Camelli ...
Journal: American Journal of Mechanical Engineering and Automation,, 2014
Author: Ihueze, C.C Mgbemena, C.O.
A Nonlinear Approach to Queueing System Modelling,
Journal: International Journal of Engineering Science and Technology, 2010
Author: Mgbemena, C.E., Mgbemena, C.O., Chinwuko, C.E
Crystal structure of tetraaquabis(3,5-diamino- 4H-1,2,4-triazol-1-ium)cobalt(II) bis[bis(pyridine-2, ...
Journal: Acta Cryst, 2015
Author: Atim Johnson, Justina Mbonu, Zahid Hussain, Wan-Sin Lohe and Hoong-Kun Funf,
Lateral Rock Property Prediction by Post Stack Acoustic Impedance Inversion: A Case Study from Offsh ...
Journal: International Journal of Sciences: Basic and Applied Research, 2016
Author: Difference Odeyovwi Ogagarue, Godswill Igoni Alaminiokuma
Seasonal Biodiversity Assessment of Benthic Macroinvertebrate of Asejire Reservoir, Southwest Nigeri ...
Journal: Journal of Sustainable Development, 2015
Author: Asibor, I. G.
A Study of Land use Change in Warri, Delta State.
Journal: The Built Environment Journal, 2006
Author: Onosemuode, C. Ufuah, M.E. and Ifatimehin, O.O.
Enhancing Hydrocarbon recovery using local Alkaline in Niger Delta Reservoir
Journal: Nigerian journal of technology (NIJOTECH), 2017
Author: Akpoturi. P .E and Ofesi S.F
Manufacture of hand hacksaw blades form locally available mild stee
Journal: The Nigerian Engineer, 1991
Author: IBHADODE, A.O.A. and OJEAH, C.C
An Optimal Investment Returns with N-Step Utility Functions
Journal: Bulletin of Mathematical Sciences and Applications, 2016
Author: EGHWERIDO Joseph Thomas and OBILADE Titilola