PUBLICATIONS
Identification and Morphology of pathogens in liquid effluent from a biodigester with cow dung feed ...
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2020
Author: Ogunkeyede A.O, Okorhi-Damisa B.F, Tedjere E, and Adeniyi S.
Analytical Solution of MHD Free Convective Heat and Mass Transfer Flow in a Porous Medium.
Journal: The Pacific Journal of Science and Technology, 2013
Author: Akindele Michael Okedoye Ph.D.
Revolution and Challenges Associated with Developing Countries Power Sector: A Case Study of the Nig ...
Journal: Journal of Engineering Science Application (JESA), 2016
Author: E. I. Okhueleigbe, A. O. Okhueleigbe, J. A. Ogbekhiulu, D. Okene, C. U. Ogu, A. O. ONYAN
Design and Manufacture of a 30-ton Hydraulic Press
Journal: Mechanical Engineering Department, Federal University of Technology , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Using factor Cluster analysis and enrichment methods to evaluate impact of cement production on str ...
Journal: Advances in Applied Science Research, 2011
Author: Ameh, E.G., Kolawole, M.S. and Imeokparia, E.G.
ONLINE MONITORING OF SOFT SENSOR PERFORMANCE: A CASE STUDY OF CEMENT CLINKER QUALITY PARAMETERS SOFT ...
Journal: IJRET: International Journal of Research in Engineering and Technology, 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Problems of Environmental Pollution and Control in the Nigeria Petroleum Industry
Journal: journal of research in Engineering and Environmental Studies, 2006
Author: Akpoturi P.E and Ndukwe J.O
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in Industry, Vol 33, Iss 1, Pp 11-17 (2011), 2011
Author: A. C. Igboanugo / A. O. A. Ibhadode / C. U. Atuanya
An assessment of the usage of project evaluation techniques in some selected Nigerian industries
Journal: Journal of Social Management Sciences , 1998
Author: UMEMEZIA, F.O. and IBHADODE, A.O.A
Empirical Model for Bioethanol Production Process from Corn Stover Using Response Surface Methodolog ...
Journal: International Journal of Emerging Trends in Engineering and Development, 2016
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora, Eke Akachukwu Ben
Design of a PV-Connected DC-DC Converter
Journal: International Journal of Emerging trends in Engineering and Development, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Isolation and Characterization of Hydrocarbon Utilizing Yeast (HUY) Isolates from Palm Wine
Journal: American Journal of Molecular Biology, 2016
Author: Okerentugba, P.O., Ataikiru, T.L. and Ichor, T.
Development of Asbestos-Free Friction Lining Material from Palm Kernel Shell
Journal: Journal of the Brazilian Society of Mechanical Sciences, 2008
Author: A. O. A. Ibhadode, I. M. Dagwa
Levels of endocrine disrupting organochlorine pesticides in herbal medicines from Bayelsa State, Nig ...
Journal: Toxicology and Environmental Health Sciences, 2024
Author: Tesi, G.O., Felagha, I., Ogbuta, A.A., Ogbomade, W.E., Obodoka, G.C., Iniaghe, P.O. and Kpomah, E.D.
OPTIMIZATION OF INVESTMENT RETURNS WITH N-STEP UTILITY FUNCTIONS
Journal: Journal of Nigerian Mathematical Society, 2014
Author: J. T. EGHWERIDO1 AND T. O. OBILADE
Assessing mechanical properties of natural fibre reinforced composites for engineering applications ...
Journal: Journal of Minerals and Materials Characterization and Engineering, 2012
Author: Samuel, O.D., Agbo, S. and Adekanye, T.A.
Assessment of the Problems Militating Against Tourism Development in Delta State, Nigeria.
Journal: Confluence Journal of Environmental Studies, 2006
Author: Onosemuode, C and Usideme, P.O (2006)
Phytochemical screening, Antioxidant and Antimicrobial activities of Senna occidentalis (L.) leaves
Journal: Int J Herbal Medicine, 2014
Author: Odeja OO, Obi G, Ogwuche CE, Elemike EE, Oderinlo OO.
Gas Lift Technique a Tool to Production Optimization
Journal: International Journal of Oil, Gas and Coal Engineering, 2015
Author: Okotie Sylvester 1 , Ikporo Bibobra 2 , Ovuema Augustina 1
A Study of Land use Change in Warri, Delta State.
Journal: The Built Environment Journal, 2006
Author: Onosemuode, C. Ufuah, M.E. and Ifatimehin, O.O.
Manufacture of hand hacksaw blades form locally available mild stee
Journal: The Nigerian Engineer, 1991
Author: IBHADODE, A.O.A. and OJEAH, C.C
High Power Picosecond Laser Surface Micro-texturing of H13 Tool Steel and Pattern Replication onto A ...
Journal: Lasers in Manufacturing and Materials Processing, 2016
Author: Otanocha, O.B., Li, L., Zhong, S. and Liu, Z
Optimisation Of Alkaline Ethanolysis Of Biodiesel Yield From Nigerian Coconut Oil Using One Variable ...
Journal: JENRM, 2014
Author: Samuel, O.D, Okwu, M.O., Oreko B. and Amosun S.T
Adsorption and desorption performances of Eichhornia crassipes (water hyacinth) roots and leaves pow ...
Journal: Ovidius University Annals of Chemistry, 2025
Author: Tesi, G.O., Ejeromedoghene, O., Alli, Y.A., Okunoja, H.B. and Ipeaiyeda, A.R.
Assessment of total petroleum hydrocarbons contents in water and soil samples from power station dis ...
Journal: Journal of Applied Science, 2016
Author: Edjere, O., Asibor, G. and Bassey, U.
Performance of seismic detectors: a case study of the sensitivity of SM-4 geophones used in Nigeria
Journal: International Research Journal of Earth Sciences, 2017
Author: G.I. Alaminiokuma and W.N. Ofuyah
The Capability of using GIS in Managing Environmental Problem in the Niger Delta
Journal: Journal of Empirical Research., 2006
Author: Onosemuode, C and Okhae, S.E.
Assessment of Soil Quality for Sustainable Agricultural Development in Kaita, Katsina State, Nigeria
Journal: International Journal of Sustainable Development. , 2011
Author: Onosemuode, C Umunade O. Charleston. .
APPLICATION OF DESIGN EXPERT IN THE ANALYSIS OF RESPONSE TRANSFORMATION OF PROCESSES A CASE STUDY O ...
Journal: International Journal of Advanced Research (IJAR), 2017
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora and Eke Akachukwu Ben.
Scale Inhibitor (SIH 307) Commissioning Using Langelier Saturation and Ryznar Stability Indices in A ...
Journal: International Journal of Engineering and Technical Research (IJETR), 2015
Author: Ohimor E.O, Oghenejobor K.M, Teddy Odisu, Iduh Donald and Onocha O.
Technical Properties of Some Plant Fibres Compared with Glass Fibre
Journal: : International Journal of Engineering Research in Africa , 2010
Author: M. Sumaila, A.O. Akii Ibhadode
Justification for Oil Well Stimulation
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Okotie Sylvester, Ubani C. E., Ikporo Bibobra
Developments in the Measurement and Estimation Methods for Cement Clinker Quality Parameters
Journal: International Journal of Engineering Research Technology (IJERT), 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Petrological and Geochemical Characteristics of some Mesozoic granitic rocks hosting Sn-Nb-W-U miner ...
Journal: Petrogenesis and Minealization of Ganitoids Science Press, Beijing, China, 1992
Author: Imeokparia, E.G.
CARBON NANOTUBES: A REVIEW OF THE CURRENT STATE-OF-THE-ART MATERIAL SCIENCE AND TECHNOLOGY TOWARDS A ...
Journal: Int J Cur Res Rev , 2015
Author: Boye T.E., Oyekale J.O., Arivie G.O.
ENTROPY GENERATION IN COMBINED HEAT AND MASS TRANSFER EFFECT ON MHD FREE CONVECTION FLOW PAST AN OSC ...
Journal: Journal of Mathematics and Science (JMS) , 2015
Author: OKEDOYE A. M
Investigations into the Applications of Ergonomics Principles in the Design of School Furniture in N ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences, 2013
Author: Ashiedu F. I. and Amiebenomon, S. O.
Punch and Counterpunch Design by the Die Expansion Method in Completely Closed Die Forging
Journal: MATERIALS SCIENCE FORUM, 2006
Author: Ibhadode, A. O. A.
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
THE SECURITY PROVIDER... Social Responsibility and Customer Satisfaction
Journal: Security, 2020
Author: Onakpoma Oboroghenerukohwo
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: IJETAE , 2013
Author: C.O Izelu, Eze S.C, B.U. Oreko and Edward B.A.
Corrosion Rates and its Impact on Mild Steel in Some Selected Environments.
Journal: Journal of Scientific and Engineering Research., 2016
Author: Umeozokwere, A. O., Mbabuike I.U., Oreko B.U, and Ezemuo, D.T.
Time-Lapse Seismic Acquisition in the Niger Delta: Challenges and Successes
Journal: Geosciences, 2017
Author: G. I. Alaminiokuma, W. N. Ofuyah
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: International Journal of Machine Tools and Manufacture, 2004
Author: P.E. Amiolemhen, A.O.A. Ibhadode
On a Method for Die Container Design in Completely Closed Die Forging
Journal: TRANSACTIONS- AMERICAN SOCIETY OF MECHANICAL ENGINEERS JOURNAL OF MECHANICAL DESIGN, 1997
Author: Ibhadode, A. O. A.
Assessment of the Social and Environmental Impacts of Keffi-Lafia Federal Highway.
Journal: International Journal of Physical Science. , 2011
Author: Onosemuode, C and Akwa, L
The Spatial Assessment of Wastes Collection Points Using GIS Approach.
Journal: The Nigerian Journal of Cartography and GIS., 2013
Author: Onosemuode C. Ajayi O. Ayodele and Esemedade J. U
A Demonstration of Box Jenkins forecasting typology
Journal: The Nigerian Journal of Engineering Management, 2003
Author: IGBOANUGO, A.C., IBHADODE, A.O.A., and ODIGIE, F
Application of Electrical Resistivity Method in the Assessment of Groundwater Potential for Sustanab ...
Journal: Annals of Environmental Studies, 2016
Author: Onosemuode, C., Ataikiru, T. L. and Oghama, O. E.
A Nonlinear Approach to Queueing System Modelling,
Journal: International Journal of Engineering Science and Technology, 2010
Author: Mgbemena, C.E., Mgbemena, C.O., Chinwuko, C.E