PUBLICATIONS
The influence of Creep on the Mechanical properties of Calcium Carbonate Nanofiller Reinforced Polyp ...
Journal: Journal of Minerals and Materials Characterization and Engineering. , 2011
Author: Ihueze, C.C., Mgbemena, C.O., Ugwu, S.
Design of Maximum Power Point Tracker (MPPT) and Phase Locked Loop (PLL) in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
Effects of Reinforcement Combinations of Calcium Carbonate nanofiller on the Mechanical and Creep p ...
Journal: Journal of Minerals and Materials Characterization and Engineering, , 2010
Author: Ihueze, C.C. Mgbemena, C.O.
Assessment of the Social and Environmental Impacts of Keffi-Lafia Federal Highway.
Journal: International Journal of Physical Science. , 2011
Author: Onosemuode, C and Akwa, L
Application of Linear Programming Model and Sensitivity Analysis in Multi Source Multi Destination S ...
Journal: Canadian International Journal of Science and Technology, Ontario Canada, 2017
Author: M. O.Okwu, F.I Ashiedu, Joachim Gidiagba, and A. Adedoyin
Modeling Hyperelastic Behavior of Natural Rubber/Organomodified Kaolin Composites Oleochemically Der ...
Journal: Journal of Scientific Research Reports, , 2014
Author: Ihueze,C.C Mgbemena,C.O.
Effects of Sodium Hydroxide Concentration on the Physical Properties of Zeolite Produced from Local ...
Journal: European Journal of Scientific Research, 2011
Author: Oghenejoboh, K. M. and Ohimor, E. O.
Characteristics of Some River Bed Sands and their Suitability for Making Colourless Glass
Journal: Ideal Journal of Engineering and Applied Science, 2016
Author: Edjere, O., Okpidi, T.J.I.
Sorption of Mn(II) ions from wastewater using dried and blended water hyacinth (Eichhornia crassipes ...
Journal: Journal of the Turkish Chemical Society Section A: Chemistry,, 2024
Author: Tesi, G.O., Ejeromedoghene, O., Kpomah, B. and Ipeaiyeda, A.R.
DESIGN AND DEVELOPMENT OF A LOW-COST WASHING MACHINE SUITABLE FOR POLYTHENE MATERIALS
Journal: Asian Journal of Current Research, 2017
Author: EMAGBETERE EYERE, ADEYEMI I. OLABISI AND OGHENEKOWHO P. ARUOTURE1
Implementation of a Microcontroller Based 5 KVA Automatic Voltage Stabilizer
Journal: International Journal of Latest Research in Engineering and Technology (IJLRET), 2017
Author: G. OFUALAGBA AND C. K. IGBINOBA
Design and Manufacture of Automobile Disk Brake Pad Test Rig
Journal: Nigerian Journal of Engineering Research and Development, 2005
Author: Dagwa, Ishaya - Ibhadode, A.O.Akii
The Influence of Process Variables on Load and Accuracy When Forging in a Completely Closed Cavity D ...
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Institution of Mechan, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
Determining Temperature Extreme in Warri City, Niger-Delta Region, Nigeria
Journal: 9(3): 160-166, 2019 Article no.IJECC.2019.013 ISSN: 2581-8627, 2019
Author: Y. S. Onifade1 and V. B. Olaseni1
Nigeria Natural Gas Supply Preference and the Environment
Journal: Journal of Energy Technologies and Policy, 2014
Author: Wilfred Chinedu Okologume
Social Networking Tools in Library Service Delivery: The Case of Academic Libraries in South-East Z ...
Journal: DESIDOC Journal of Library Information Technology, 2016
Author: Saturday U. Omeluzor, Gloria O. Oyovwe-Tinuoye and Imam Abayomi
Pivot Hole Thickness Optimization and Material Design for Functional Requirement of Front Axle Suppo ...
Journal: American Journal of Materials Science and Application , 2014
Author: Aduloju, S.C., Mgbemena, C.O., Maduike, J. Abdurahman, J.
Optimisation Of Alkaline Ethanolysis Of Biodiesel Yield From Nigerian Coconut Oil Using One Variable ...
Journal: JENRM, 2014
Author: Samuel, O.D, Okwu, M.O., Oreko B. and Amosun S.T
Simulation and experimental verification of completely closed cavity die forging on a mechanical pre ...
Journal: Proc. Institution of Mechanical Engineers, 1989
Author: IBHADODE, A.O.A. and DEAN, T.A
Predicting Crude Oil Sales in NNPC Mega Station Awka, Anambra State, Nigeria.
Journal: Journal of Scientific and Engineering Research., 2016
Author: Umeozokwere, A.O., Oreko B.U., Offor I.C., Udoye, B.O.
A Critical review of in-situ transesterification process for Biodiesel Production.
Journal: The Pacific Journal of Science and Technology, 2012
Author: Samuel, O.D. and Dairo, O.U.,
Delineation of Soil Corrosivity Regimes Along Petroleum Pipeline Routes in the Geomorphic Zones of t ...
Journal: Petroleum Technology Development Journal, 2016
Author: Alaminiokuma, G. I., Osokpor, J., Emudianughe, J. E. and Warmate, T.
Human exposure to endocrine-disrupting organochlorine and organophosphate pesticides in locally prod ...
Journal: International Journal of Environmental Health Research, 2024
Author: Tesi, G.O., Okpara, K.E., Tesi, J.N., Agbozu, I.E. and Techato, K.
Material Requirement Planning of MISO Production Process using Transfer Function: A Case Study of So ...
Journal: Journal of the Nigeria Association of Mathematical Physics. , 2016
Author: S. Okiy, B.U. Oreko and C.C. Nwobi-Okoye
CONTAMINATION OF SOIL AND RIVERS BY LEAD FROM USED ENGINE OIL: A CASE STUDY OF CHOBA COMMUNITY IN PO ...
Journal: Pollution Research., 2011
Author: K.M. OGHENEJOBOH and E.O. OHIMOR
Performance characteristics and analysis of tailored Natural Rubber/Organo-kaolin Composites
Journal: International Journal of Plastics Technology, 2016
Author: Mgbemena, C.O., Ihueze, C.C. Menon, A.R.R.
PERFORMANCE OF AN AUTOMOTIVE BUMPER FROM LALLOH 2 (Corchorustriden L.) PLANT FIBRE REINFORCED EPOXY ...
Journal: Nigerian Journal of Technology (NIJOTECH), 2016
Author: M Sumaila, AOA Ibhadod
Software for Reservoir Performance Prediction
Journal: Onepetrol Journal, 2015
Author: Okotie, Sylvester. and Onyekonwu Mike
Design, production and performance testing of two component cutting force dynamometer
Journal: Journal of the Nigerian Institution of Production Engineers, 1998
Author: DAGWA, I.M. and IBHADODE, A.O.A.
High Power Picosecond Laser Surface Micro-texturing of H13 Tool Steel and Pattern Replication onto A ...
Journal: Lasers in Manufacturing and Materials Processing, 2016
Author: Otanocha, O.B., Li, L., Zhong, S. and Liu, Z
Effects of breadfruit seed hull ash on the microstructures and properties of AlSiFe alloy/breadfruit ...
Journal: undefined!, 2012
Author: ites Author links open overlay panelC.U.AtuanyaaA.O.A.Ibhadode.M.Dagwa
A Cost-Based Approach for Analysing the Overheads of Multicast Protocols in Non-Strictly Hierarchica ...
Journal: International Journal of Communication Networks and Information Security (IJCNIS), 2011
Author: Akpojaro, J., Aigbe, P., Oyemade, D
Empirical Method to Predict the Performance of Human Powered Mono Hull Boats
Journal: International Journal of Engineering and Technologies, 2016
Author: Pereowei G. Ombor, Agbakwuru Jasper, Modestus O. Okwu,
Predictive Model for Cement Clinker Quality Parameters
Journal: Journal of Materials Science and Chemical Engineering., 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
A Time Function Havlena and Odeh MBE Straight Line Equation
Journal: Onepetrol Journal, 2015
Author: Stanley Buduka., Biu Victor T., and Okotie Sylvester
The Design of a Manual Table-Top Grinder,
Journal: Scholars Journal of Engineering and Technology,, 2014
Author: Abdulmalik, I.O., Michael, A., Akonyi, N.S., Mgbemena, C.O., Aaron-Orsu, C.J Ambali, A.O.
Analysis of Coconut Ester(Biodiesel) and Fossil Diesel Blending: Properties and Corrosion Characteri ...
Journal: Nigeria Journal of Technology, NIJOTECH. , 2016
Author: Samuel , O.D, Ashiedu, F.I. and Oreko B.U.
Development of a New Flux for Aluminium Gas Welding
Journal: Advanced Materials Research, 1994
Author: Joseph I. Achebo, A.O. Akii Ibhadode
Derivation of the von Mises and Tresca yield loci in plane stress from the yield surface in three di ...
Journal: Journal of the Nigerian Institution of Production Engineers, 1993
Author: IBHADODE, A.O.A
Application of Geographical Information System (GIS) for Spatial Decision Support in Eco-Tourism Dev ...
Journal: Environmental Research Journal, 2010
Author: Onosemuode C. and Dare O.T. (2010)
Effect of cutting fluids on tool wear during turning operations
Journal: Technical Transactions of the Nigerian Society of Engineers, 1999
Author: MUSA, M. and IBHADODE, A.O.A
Artificial neural network model for cost optimization in a dual-source multi-destination outbound sy ...
Journal: PRODUCTION MANUFACTURING, 2018
Author: Modestus O. Okwu, Benjamin Ufuoma Oreko, Stanley Okiy, Austin C. Uzorh and Onyewuchi Oguoma
On the Unsteady Free Convective Flow with Radiative Heat Transfer of Sisko Fluid
Journal: International Journal of Innovative Science, Engineering Technology, 2015
Author: Akindele Michael Okedoye
Seismic Raypath and Wavefront Models in the Lithofacies of the Niger Delta, Nigeria
Journal: British Journal of Applied Science Technology, 2017
Author: G. I. Alaminiokuma
THE SECURITY PROVIDER... Social Responsibility and Customer Satisfaction
Journal: Security, 2020
Author: Onakpoma Oboroghenerukohwo
Development of Asbestos-Free Automotive Brake Pad Using Ternary Agro-Waste Fillers
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: Adeyemi, I. Olabisi, Nuhu, A. Ademoh, Thankgod E. Boye
An Evolvable Framework for Metamorphics
Journal: Computing, Information Systems, Development Informatics Allied Research Journal, 2016
Author: Allenotor, David
Stochastic Analysis of the Effect of Asset Prices to a Single Economic Investor
Journal: Bulletin of Mathematical Sciences and Applications, 2016
Author: E. Ekuma-Okereke, J. T. Eghwerido, E. Efe-Eyefia, S. Zelibe
A Simple Procedure for Calculating shut -in Tubing Pressure (SITP)
Journal: Journal of Engineering and Applied Scientific Research, 2014
Author: Akpoturi Peters
Assessment of Household Energy Utilized for Cooking in Ikeja, Lagos State, Nigeria.
Journal: Nigeria Journal of Technology, NIJOTECH., 2016
Author: E. Emagbetere, J. Odia and Oreko, B.U.