PUBLICATIONS
Hydrological Analysis of Onitsha North East Drainage Basin Using Geoinformatic Techniques.
Journal: World Applied Sciences Journal , 2010
Author: Onosemuode C. Adetimirin O. I and Aboderin S. O.
Effects of Reinforcement Combinations of Calcium Carbonate nanofiller on the Mechanical and Creep p ...
Journal: Journal of Minerals and Materials Characterization and Engineering, , 2010
Author: Ihueze, C.C. Mgbemena, C.O.
Compositional, Geotechnical and Industrial Characteristics of Some Clay Bodies in Southern Nigeria
Journal: Jour. of Geography and Geology, 2013
Author: Onyeobi T.U.S Imeokparia, E.G. Ilegieuno O.A and Egbuniwe I.G
The Influence of Process Variables on Load and Accuracy When Forging in a Completely Closed Cavity D ...
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Institution of Mechan, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
Investigations into the Applications of Ergonomics Principles in the Design of School Furniture in N ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences, 2013
Author: Ashiedu F. I. and Amiebenomon, S. O.
Sequestering of Fe and Pb ions from Wastewater by Canarium schweinfurthii after carbonization and ch ...
Journal: Journal of Applied Science and Environmental Management, 2016
Author: Bassey Uwem, Oghenekohwiroro Edjere and Solomon Ebiye Otolo
Application of Geographical Information System (GIS) for Spatial Decision Support in Eco-Tourism Dev ...
Journal: Environmental Research Journal, 2010
Author: Onosemuode C. and Dare O.T. (2010)
2-Imino-(3,4-dimethoxybenzyl) ethanesulfonic acid Schiff base anchored silver nanocomplex mediated b ...
Journal: JART, 2016
Author: Elias E. Elemike, Enock O. Dare, Inyang D. Samuel,Jude C. Onwuka
Towards a Unified University Information System: Bridging the Gap of Data Interoperability
Journal: American Journal of Software Engineering, 2014
Author: Orobor Anderson Ise
The Pareto principle and Hazard model as tools for appropriate scheduled maintenance in a manufactur ...
Journal: African Journal of Science, Technology, Innovation and Development, 2016
Author: Fadeyi, J.A., Okwu, M.O., Mgbemena, C.O., Ezekiel, K.C. (2016).
The Effect of Billet Location on Completely Closed Cavity Die Forging
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
Determination of the Contact Angles of Kaolin Intercalates of Oleochemicals derived from Rubber Seed ...
Journal: International Journal of Materials Science and Applications,, 2013
Author: Mgbemena, C.O., Mgbemena, C.E., Menon, A.R.R. Sukumar, R.
Computerised Design Approach to a Sub-Press Mould for Composite Materials Manufacture
Journal: al: Advanced Materials Research, 1994
Author: Ishaya Musa Dagwa, A.O. Akii Ibhadode
A Three Tier Learning Model for Universities in Nigeria
Journal: Journal of Technologies in Society, 2016
Author: Oyemade, D. A., Akpojaro, J., Ojugo, A., Ureigho, R. J., Imouokhome, F. A., Omoregbee, E. U.
Removal of Some Heavy Metals from Incinerator Bottom Ash Using Coconut (Cocos Nucifera) Husk
Journal: Int J Chem, 2016
Author: Doris F. Ogeleka, Harrison E. Avrukpere, Elias E. Elemike, Oghenekohwiroro Edjere, Iwekumo E. Agbozu
A combined algorithm approach to fuel consumption rate analysis and prediction of sea-worthy diesel ...
Journal: Journal of Engineering for the Maritime Environment, 2016
Author: Thaddeus C Nwaoha Garrick Ombor and Modestus O Okwu
Design of Maximum Power Point Tracker (MPPT) and Phase Locked Loop (PLL) in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
Tool wear of some hacksaw blades
Journal: Journal of the Nigerian Institution of Production Engineers, 1994
Author: IBHADODE, A.O.A
Evaluation of Phthalates Contents and Their Health Effects in Consumed Sachet Water Brands in Delta ...
Journal: International Journal of Biological, Biomolecular, Agricultural, Food and Biotechnological Engineering, 2016
Author: Edjere, O., Asibor, G. and Bassey, U.
A survey of traditional foundries and forge shops and a training programme for traditional metal cra ...
Journal: Benin Journal of Educational Studies, 1999
Author: IBHADODE, A.O.A
The Effect of using mastery learning approach on academic achievement of Senior Secondary school II ...
Journal: Elixir Edu. Tech, 2012
Author: Achufusi, N.N. Mgbemena, C.O.
Modeling Hyperelastic Behavior of Natural Rubber/Organomodified Kaolin Composites Oleochemically Der ...
Journal: Journal of Scientific Research Reports, , 2014
Author: Ihueze,C.C Mgbemena,C.O.
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
Integrating Remote Sensing and GIS for Environmental Management
Journal: The Built Environment Journal, 2005
Author: Ufuah M.E, and Onosemuode C
Artificial Neural Network (ANN) and Greedy Heuristic (GH) Approach to Transshipment Model in a Bottl ...
Journal: Operations Research and Information Engineering, 2018
Author: Modestus O. Okwu, Ikuobase Emovon
Modelling and optimization of surface roughness and machining induced vibration 41Cr4 alloy structu ...
Journal: The International Journal Of Engineering And Science (IJES), 2016
Author: Izelu, C.O., Eze, S.C. and Samuel, Olusegun David
Predicting Diffusion Dynamics Of The Coronavirus In Nigeria Through Ties-Strength Threshold On A Cas ...
Journal: Technology Reports of Kansai University, 2020
Author: . Ojugo, A. A., Oyemade, D. A.
Technical Properties of Some Plant Fibres Compared with Glass Fibre
Journal: International Journal of Engineering Research in Africa, 2010
Author: M. Sumaila, A.O. Akii Ibhadode
Application of Box Behnken Design for the Optimization of Steam Turbine Efficiency
Journal: World Journal of Engineering Research and Technology (WJERT), 2017
Author: Eyere Emagbetere, Ashiedu Festus Ifeanyi, and Samuel, O. D.
Development of a Computer-Aided Application for Analyzing ECG Signals and Detection of Cardiac Arrhy ...
Journal: International Journal of Applied Information Systems , 2015
Author: Akinlolu A. Ponnle and Oludare Y. Ogundepo
INVESTMENT RETURNS WITH AN N-STEP GENERALIZED UTILITY FUNCTIONS
Journal: ICASTOR Journal of Mathematical Sciences, 2015
Author: EGHWERIDO. J. THOMAS, E. EFE-EYEFIA E. EKUMA-OKEREKE,
Performance evaluation of a prototype two component cutting force lathe dynamometer
Journal: journal and technology research, 2016
Author: A.O.Akii Ibhadode
The effect of die container compounding on product accuracy in completely closed cavity die forging
Journal: Manufacturing Engineering Society International Conference, Calatayud, Spain, 2005
Author: IBHADODE, A.O.A. and AIBANGBEE, G.F
Design and Development of a Paraplegic Centricity Mobility Aid
Journal: Journal of Emerging Trend in Engineering and Applied Science (JETEAS) , 2012
Author: Ashiedu Festus and Igboanugo A. C.
Analyzing Thermal Insulation for Effective Hydrate Prevention in Conceptual Subsea Pipeline Design
Journal: International Journal of Current Engineering and Technology, 2015
Author: Okologume Wilfred and Dulu Appah
geochemical and isotopic evidence for crystal melt fluid phase equilibra and late stage fluid rock ...
Journal: African Journal of Science and technology, , 1992
Author: Imeokparia, E.G.
A Nonlinear Approach to Queueing System Modelling,
Journal: International Journal of Engineering Science and Technology, 2010
Author: Mgbemena, C.E., Mgbemena, C.O., Chinwuko, C.E
Environmental Pollution from Port Harcourt Refinery - A System Approach
Journal: journal of Engineering and Environmental Studies, 2006
Author: Akpoturi P.E
The Influence of the use of ICT facilities on the academic achievement of Secondary School Physics.
Journal: International Journal of Advances in Science and Technology, , 2011
Author: Achufusi, N.N., Achufusi, U.N., Mgbemena, C.O., Mgbemena, C.E..
Design, production and performance testing of two component cutting force dynamometer
Journal: Journal of the Nigerian Institution of Production Engineers, 1998
Author: DAGWA, I.M. and IBHADODE, A.O.A.
Development of water hyacinth briquetting machine
Journal: International Journal of Scientific Research in Information Systems and Engineering (IJSRISE), 2016
Author: Modestus Okwu, Adeyemi I. Olabisi, ThankGod E. Boye, Ezurike O. Benjamin
Experimental Study of Induced Vibration and Work Surface Roughness in the Turning of 41Cr4 Alloy S ...
Journal: IJIRSET , 2013
Author: Eze S.C., Izelu, C.O., Oreko B.U., Edward B.A
Development of a New Flux for Aluminium Gas Welding
Journal: : Advanced Materials Research, 1994
Author: oseph I. Achebo, A.O. Akii Ibhadode
Water table regime in parts of Obio-Akpor local Government area of Rivers State, Nigeria
Journal: International Research Journal of Earth Sciences, 2017
Author: G. I. Alaminiokuma and W. N. Ofuyah
Hydrogeological Studies for Groundwater resource and its vulnerability to contamination in Owo, Sout ...
Journal: International Journal of Science and Research (IJSR), 2015
Author: Falowo, O.O, and Imeokparia, E.G
On a Method for Die Container Design in Completely Closed Die Forging
Journal: TRANSACTIONS- AMERICAN SOCIETY OF MECHANICAL ENGINEERS JOURNAL OF MECHANICAL DESIGN, 1997
Author: Ibhadode, A. O. A.
DEVELOPMENT OF ERASABLE WHITEBOARD MARKER INKS
Journal: Canadian International Journal of Science and Technology,, 2017
Author: Kindness Uyanga Paul Onaji Modestus O. Okwu.
The Effect of Calcium Carbonate at Low Volume Fractions On the Mechanical Properties of Polypropylen ...
Journal: Journal of Engineering and Applied Sciences, , 2010
Author: Mgbemena, C.O., Ubani, N.O., Mgbemena, C.E.
ACCIDENT CAUSATIVE MODEL IN THE OIL AND GAS CONURBATION USING MARKOV CHAIN
Journal: International Journal of Scientific Research in Information Systems and Engineering , 2016
Author: Okwu, Modestus.O. Thaddeus Nwaoha Adeyemi, I. Olabisi and Ezurike Benjamin. O.
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: International Journal of Machine Tools and Manufacture, 2004
Author: P.E. Amiolemhen, A.O.A. Ibhadode