PUBLICATIONS
DETECTION OF CRACK LOCATION AND SIZE IN STRUCTURES USING HIGHER HARMONICS OF EXCITED FREQUENCY
Journal: Research Journal in Engineering and Applied Sciences, 2013
Author: Ezekiel Kingsley C., Okwu Modestus O., Johnson A. Fadeyi
Development of useful products from agro-waste and polythene bags
Journal: Conference on New Products and Technologies for Small and Medium Enterprises,, 2001
Author: IBHADODE, A.O.A
Sorption of Mn(II) ions from wastewater using dried and blended water hyacinth (Eichhornia crassipes ...
Journal: Journal of the Turkish Chemical Society Section A: Chemistry,, 2024
Author: Tesi, G.O., Ejeromedoghene, O., Kpomah, B. and Ipeaiyeda, A.R.
Evaluation of the Cost and Effect of Industrial Accidents
Journal: European Journal of Scientific Research, 2015
Author: Yusuf, T.A., Ismaila, S.O., Kuye, S.I. and Samuel, O.D.
Production of Biodiesel from Nigeria Restaurant Waste Cooking Oil using Blender.
Journal: International Journal of Renewable Energy Research, 2013
Author: Samuel, O.D., Waheed, M.A., Bolaji B.O. and O.U. Dairo
APPLICATION OF CASSAVA PEELS ACTIVATED CARBON IN THE TREATMENT OF OIL REFINERY WASTEWATER A COMPARA ...
Journal: Journal of Ecological Engineering, 2016
Author: Kigho Moses Oghenejoboh, Smith Orode Otuagoma, Evuensiri Onogwharite Ohimor
An Investigation of Predictability of Traders Profitability Using Deep Learning
Journal: American Journal of Computer Science and Technology, 2024
Author: David Ademola Oyemade, Eseoghene Ben-Iwhiwhu
Preliminary Study on Antimicrobial Activity of Friendly Bacteria Isolated from Dairy Products
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2015
Author: Okorhi-Damisa, F. B. and Ataikiru, T. L.
Performance evaluation of a prototype two component cutting force lathe dynamometer
Journal: journal and technology research, 2016
Author: A.O.Akii Ibhadode
Analyzing Thermal Insulation for Effective Hydrate Prevention in Conceptual Subsea Pipeline Design
Journal: International Journal of Current Engineering and Technology, 2015
Author: Okologume Wilfred and Dulu Appah
PERFORMANCE OF AN AUTOMOTIVE BUMPER FROM LALLOH 2 (Corchorustriden L.) PLANT FIBRE REINFORCED EPOXY ...
Journal: Nigerian Journal of Technology, 2016
Author: M. Sumaila and A. O. A. Ibhadode
Optimizing the Output Current for a DC-DC Converter
Journal: Journal of Control Theory and Informatics, International Institute for Science, Technology and Education, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles and Onyan Aaron Okiemute
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
The viability of compressed natural gas (CNG) as an alternative automobile fuel in Nigeria
Journal: Journal of Social Management Sciences, 1997
Author: AKELE, S.M.G. and IBHADODE, A.O.A.
A Time Function Havlena and Odeh MBE Straight Line Equation
Journal: Onepetrol Journal, 2015
Author: Stanley Buduka., Biu Victor T., and Okotie Sylvester
Development of a New Flux for Aluminium Gas Welding
Journal: : Advanced Materials Research, 1994
Author: oseph I. Achebo, A.O. Akii Ibhadode
Towards an Enhanced Product Line Engineering Process Model
Journal: Benin Journal of Advances in Computer Science, 2019
Author: Oyemade, D. A, Onibere, E. A.
The Influence of the use of ICT facilities on the academic achievement of Secondary School Physics.
Journal: International Journal of Advances in Science and Technology, , 2011
Author: Achufusi, N.N., Achufusi, U.N., Mgbemena, C.O., Mgbemena, C.E..
Development of a Manual Metal Arc Welding Flux from Local Raw Materials in Nigeria
Journal: Applied Mechanics and Materials, 2004
Author: Oyawale Festus Adekunle, Odior Andrew Oyakhobo, Ibhadode Akii
Virtual Remote Control System Using Embedded Systems with Internet of Things
Journal: FUPRE Journal of Scientific and Industrial Research (FJSIR), 2024
Author: Nwachukwu, K., Oyemade, D. A.
Contextualization of Entrepreneurial Education in Production Engineering Discipline
Journal: Journal of Emerging Trends in Education and Policy Studies (JETERAPS) , 2011
Author: Igboanugo Anthony C. and Ashiedu Festus
The Influence of Process Variables on Load and Accuracy When Forging in a Completely Closed Cavity D ...
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Institution of Mechan, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
Assessment of the activities of scavengers and their economic impacts in waste recovery in Warri met ...
Journal: International Research Journal of Public and Environmental Health, 2017
Author: Asibor Godwin, Edjere Oghenekohwiroro
Facilitating Hazard Analysis of LNG Carrier Operations via Risk Matrix Approach
Journal: International Journal of Science and Technology, 2016
Author: Thaddeus C. Nwaoha Jasper Agbakwuru Modestus O. Okwu
Distribution pattern, sources and ecological risk assessment of polycyclic aromatic hydrocarbons (PA ...
Journal: Journal of Chemical Society of Nigeria, 2025
Author: Okonkwo, E.O., Nwajei, G.E., Agbaire, P.O. and Tesi, G.O
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
Remedation of Crude Oil-Polluted Surface Water Using Aqua-gel Bentonite, Periwinkle Shell Chitosin E ...
Journal: Journal of Ecology and Environment, 2016
Author: Okafor, W.C., Menkiti, M., Okafor, I., Ohimor, E., Onocha, O., Oreko, B., and Sheidu, S.
Performance Evaluation of an Indigenous Rotary Power Weeder
Journal: Energy and Environmental Engineering Journal, 2012
Author: Olaoye, J. O. and Samuel, O. D. and Adekanye, T. A
geochemical and isotopic evidence for crystal melt fluid phase equilibra and late stage fluid rock ...
Journal: African Journal of Science and technology, , 1992
Author: Imeokparia, E.G.
CARBON NANOTUBES: A REVIEW OF THE CURRENT STATE-OF-THE-ART MATERIAL SCIENCE AND TECHNOLOGY TOWARDS A ...
Journal: Int J Cur Res Rev , 2015
Author: Boye T.E., Oyekale J.O., Arivie G.O.
Evaluation of Pure Aluminium Inoculated with Varying Grain Sizes of an Agro-waste based Inoculant
Journal: Advances in Science, Technology and Engineering Systems Journal , 2017
Author: 2. Adeyemi I. Olabisi, ThankGod E. Boye, Emagbetere Eyere
Improved Correlation for Predicting Stock Tank Gas-Oil Ratio in Niger Delta
Journal: Onepetrol Journal, 2016
Author: Hilary Okeke. and Okotie Sylvester
Performance characteristics and analysis of tailored Natural Rubber/Organo-kaolin Composites
Journal: International Journal of Plastics Technology, 2016
Author: Mgbemena, C.O., Ihueze, C.C. Menon, A.R.R.
Design and Implementation of a Digital Thermometer with Clock
Journal: GLOBAL JOURNAL OF ENGINEERING RESEARCH, 2016
Author: Benjamin O. Akinloye, AARON O. ONYAN, Donaldson E. Oweibor
Design of Maximum Power Point Tracker (MPPT) and Phase Locked Loop (PLL) in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
Assessment of the Problems Militating Against Tourism Development in Delta State, Nigeria.
Journal: Confluence Journal of Environmental Studies, 2006
Author: Onosemuode, C and Usideme, P.O (2006)
DISTRIBUTION OF PHTHALATE ESTERS IN UNDERGROUND WATER FROM POWER TRANSMISSION SITES IN WARRI METROPO ...
Journal: Journal of applied science and environmental management, 2016
Author: EDJERE, O ASIBOR, IG BASSEY, U
The Use of Geoinformatics in Site Selection for Suitable Landfill for Poultry Waste: A Case Study of ...
Journal: International Journal of Sciences, 2016
Author: Onosemuode C. and Abodurin W.A
Design of DC-link Voltage Controller and Grid Current Controller in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
Small and Meduim Scale Enterprises- Catalyst for National Development in Nigeria
Journal: Journal of Scientific and Industrial Studies, 2007
Author: Akpoturi P.E
2D static failure prediction for critical stresses of an automobile tire sidewall using MATLAB PDETo ...
Journal: IOSR-Journal of Mechanical Civil Engineering,, 2014
Author: Ihueze, C.C., Mgbemena, C.O., Menon, A.R.R.
Utilization of Nigerian precious Resource in the Niger Delta Region for the benefit of the Ecosystem ...
Journal: International Journal of Engineering and Technology (IJET), 2014
Author: Okotie Sylvester and Ikporo Bibobra
Static Analysis of Tyre Model Developed from Natural Rubber Vulcanizates.
Journal: Lecture Notes in Computer Science, 2016
Author: Mgbemena, C.O., Mgbemena, C.E., Ashiedu, F.I. Menon, A.R.R. Oral Paper presented at The 2016 International Conference
Predicting Reservoir Behavior using Mathematical Models 3 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
Towards a Unified University Information System: Bridging the Gap of Data Interoperability
Journal: American Journal of Software Engineering, 2014
Author: Orobor Anderson Ise
Report on the Evaluation of Ugua J2 and J3 Reservoir Performance.
Journal: American Journal of Engineering and Applied Sciences, 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ovuema Augustina
Anti-pseudomonas activity of organic acids produced by lactic acid bacteria
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2014
Author: Beatrice Folawe Okorhi
EXPERIMENTAL DETERMINATION OF THE EFFECT OF NOTCH SHAPE ON WEIR FLOW CHARACTERISTICS USING CONSTANT ...
Journal: Asian Journal of Current Research (AJOCR), 2017
Author: ADEYEMI I. OLABISI, ABAM TAMUNOPEKERE JOSHUA AND OREKO U. BENJAMIN
Some physical and mechanical properties of palm kernel shell (PKS)
Journal: Botswana Journal of Technology, 2010
Author: IM Dagwa, AO Ibhadode
Optimization of Nigerian Restaurant Waste Cooking Biodiesel Reaction Parameters using Response Surfa ...
Journal: International Journal of Energy Optimization and Engineering, 2014
Author: Waheed, M.A., Samuel, O.D., Bolaji, B.O. and Dairo, O.U.