PUBLICATIONS
APPLICATION OF CASSAVA PEELS ACTIVATED CARBON IN THE TREATMENT OF OIL REFINERY WASTEWATER A COMPARA ...
Journal: Journal of Ecological Engineering, 2016
Author: Kigho Moses Oghenejoboh, Smith Orode Otuagoma, Evuensiri Onogwharite Ohimor
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
Pivot Hole Thickness Optimization and Material Design for Functional Requirement of Front Axle Suppo ...
Journal: American Journal of Materials Science and Application , 2014
Author: Aduloju, S.C., Mgbemena, C.O., Maduike, J. Abdurahman, J.
Modeling to Support using Crouch Technique to Lift Low-Lying Objects
Journal: Journal of the Nigerian Association of Mathematical Physics , 2012
Author: Igboanugo, A. C. Ashiedu, F. And Onifade M. K.
Minimizing the risk of erosion damage of some wells in Niger Delta Field with clampon DSP monitor
Journal: International Journal of Petroleum Engineering, 2015
Author: Ikporo Bibobra, Okotie Sylvester and Ichenwo John-Lander
Diamond Bit Selection for Horizontal Wells
Journal: journal of Engineering Research and Sustainable Development, 2009
Author: Akpoturi Peters and Onwuachi- Iheagwara P .N
Application of Geographical Information System (GIS) for Spatial Decision Support in Eco-Tourism Dev ...
Journal: Environmental Research Journal, 2010
Author: Onosemuode C. and Dare O.T. (2010)
Distribution pattern, sources and ecological risk assessment of polycyclic aromatic hydrocarbons (PA ...
Journal: Journal of Chemical Society of Nigeria, 2025
Author: Okonkwo, E.O., Nwajei, G.E., Agbaire, P.O. and Tesi, G.O
THE SECURITY PROVIDER... Social Responsibility and Customer Satisfaction
Journal: Security, 2020
Author: Onakpoma Oboroghenerukohwo
Derivation of the von Mises and Tresca yield loci in plane stress from the yield surface in three di ...
Journal: Journal of the Nigerian Institution of Production Engineers, 1993
Author: IBHADODE, A.O.A
UNSTEADY MHD MIXED CONVECTION FLOW PAST AN OSCILLATING PLATE WITH HEAT SOURCE/SINK
Journal: Journal of Naval Architecture and Marine Engineering, 2014
Author: A. M. Okedoye
High Power Picosecond Laser Surface Micro-texturing of H13 Tool Steel and Pattern Replication onto A ...
Journal: Lasers in Manufacturing and Materials Processing, 2016
Author: Otanocha, O.B., Li, L., Zhong, S. and Liu, Z
Determination of Hydrocarbon Properties produced from different oil fields in Nigeria
Journal: journal of Engineering Science and Technology, 2010
Author: Otitigbe F and Akpoturi P.E
Potentiation of the Antimicrobial Activity of 4-Benzylimino-2,3-Dimethyl-1-Phenylpyrazal-5-One by Me ...
Journal: Res J Chem Sci, 2011
Author: E.E.Elemike, A.P.Oviawe and I.E.Otuokere
The effect of die container compounding on product accuracy in completely closed cavity die forging
Journal: Manufacturing Engineering Society International Conference, Calatayud, Spain, 2005
Author: IBHADODE, A.O.A. and AIBANGBEE, G.F
Scale Inhibitor (SIH 307) Commissioning Using Langelier Saturation and Ryznar Stability Indices in A ...
Journal: International Journal of Engineering and Technical Research (IJETR), 2015
Author: Ohimor E.O, Oghenejobor K.M, Teddy Odisu, Iduh Donald and Onocha O.
Effects of Sodium Hydroxide Concentration on the Physical Properties of Zeolite Produced from Local ...
Journal: European Journal of Scientific Research, 2011
Author: Oghenejoboh, K. M. and Ohimor, E. O.
Organophosphate pesticides in herbal mixtures from Bayelsa State, Nigeria: implication for human exp ...
Journal: Journal of Environmental Exposure Assessment, 2025
Author: Tesi, G.O., Lari, B., Ogbuta, A.A., Felagha, I., Obodoka, G.C., Ogbomade, W.E., Okpara, K.E., Osioma, E. and Agbozu, I.E
Office Noise Pollution in industrial and commercial premises in Nigeria
Journal: Nigerian journal of Industrial and Systems Studies (NJISS), 2005
Author: Akpoturi P E and J Ndukwe
Development of an Electric induction furnace for heat treatment of ferrous and non-ferrous alloys,
Journal: American Journal of Engineering Research,, 2015
Author: Anaidhuno, U.P Mgbemena, C.O
Effect of Sand invasion on Oil Well Production: A Case study of Garon Field in the Niger Delta
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Bibobra Ikporo and Okotie Sylvester
Facilitating Hazard Analysis of LNG Carrier Operations via Risk Matrix Approach
Journal: International Journal of Science and Technology, 2016
Author: Thaddeus C. Nwaoha Jasper Agbakwuru Modestus O. Okwu
On a Method for Die Container Design in Completely Closed Die Forging
Journal: TRANSACTIONS- AMERICAN SOCIETY OF MECHANICAL ENGINEERS JOURNAL OF MECHANICAL DESIGN, 1997
Author: Ibhadode, A. O. A.
Delineation of Soil Corrosivity Regimes Along Petroleum Pipeline Routes in the Geomorphic Zones of t ...
Journal: Petroleum Technology Development Journal, 2016
Author: Alaminiokuma, G. I., Osokpor, J., Emudianughe, J. E. and Warmate, T.
Technology transfer and continuing engineering education
Journal: BeninJournal of Educational Studies, 1999
Author: IBHADODE, A.O.A
Implementation of Koha Integrated Library Management Software (ILMS): The Babcock University Experie ...
Journal: Canadian Social Science, 2012
Author: Saturday U. Omeluzor, Olugbenga Adara, Madukoma Ezinwayi, Itunu A. Bamidele and Felicia Oby Umahi
Technical Properties of Some Plant Fibres Compared with Glass Fibre
Journal: : International Journal of Engineering Research in Africa , 2010
Author: M. Sumaila, A.O. Akii Ibhadode
Phytochemical screening, Antioxidant and Antimicrobial activities of Senna occidentalis (L.) leaves
Journal: Int J Herbal Medicine, 2014
Author: Odeja OO, Obi G, Ogwuche CE, Elemike EE, Oderinlo OO.
Work Flow for Reservoir Study and Challenges
Journal: Onepetrol Journal, 2015
Author: Okotie Sylvester. and Stanley Buduka. and Ikporo Bibobra
Justification for Oil Well Stimulation
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Okotie Sylvester, Ubani C. E., Ikporo Bibobra
Utilization of cellulosic cassava waste for bio-ethanol production
Journal: JECE, 2015
Author: Elias E.Elemike, Ojiefoh C.Oseghale, Anthony C.Okoye
Phthalate ester plasticizers in Orogodo River Delta State and their potential health effects
Journal: International Journal of Environment and Pollution Research, 2015
Author: Edjere, O., Asibor, I. G. and Otolo, S. E.
An Optimal Investment Returns with N-Step Utility Functions
Journal: Bulletin of Mathematical Sciences and Applications, 2016
Author: EGHWERIDO Joseph Thomas and OBILADE Titilola
LED Light a futuristic Technology for African Rural Electrification
Journal: Journal of Innovative Systems Design and Engineering, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles, ONYAN AARON OKIEMUTE
Development of a New Flux for Aluminium Gas Welding
Journal: Advanced Materials Research, 1994
Author: Joseph I. Achebo, A.O. Akii Ibhadode
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
Laser Surface Micro/nano Patterning for Improving Aerodynamic Performance
Journal: Ph. D Thesis, 2015
Author: Otanocha, O.B
Electrical Properties Correlations for The Niger Delta Depobelts
Journal: Petroleum Technology Development Journal, 2016
Author: Oscar I. O. Ogali, Julius O. Otiko, Wilfred C. Okologume
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: International Journal of Machine Tools and Manufacture, 2004
Author: P.E. Amiolemhen, A.O.A. Ibhadode
Geospatial Assessment Of Vulnerable Areas To Flood Hazard and Risk Along Ikpoba River, Benin Edo S ...
Journal: The Nigerian Journal of Cartography and GIS. , 2014
Author: Onosemuode C. and Ovririe E
Punch and Counterpunch Design by the Die Expansion Method in Completely Closed Die Forging
Journal: MATERIALS SCIENCE FORUM, 2006
Author: Ibhadode, A. O. A.
Computational Modeling of Extracellular Matrix Protein Stamping on Hard Substrates for Biomedical Mi ...
Journal: Advances in Life Science and Technology, , 2014
Author: Aduloju, S.C., Nima, R., Mgbemena, C.O., Soboyejo, W.O.
Integrating Remote Sensing and GIS for Environmental Management
Journal: The Built Environment Journal, 2005
Author: Ufuah M.E, and Onosemuode C
NUMERICAL MODELLING OF CURRENT ON WAVE DRIFT LOAD OF A SHIP SHAPED OFFSHORE STRUCTURES (CASE STUDY - ...
Journal: IJRDO-Journal of Mechanical And Civil Engineering, 2017
Author: Abam, Tamunopekere Joshua, Agbakwuru, Jasper Ahamefulal, Adeyemi, I. Olabisi
Development of FeOTiO2-SiO2-CaCO3 System as a Welding Flux
Journal: Nigerian Journal of Engineering Research and Development, 2004
Author: Oyawale F.A. and Ibhadode A.O.A
OPTIMIZATION OF INVESTMENT RETURNS WITH N-STEP UTILITY FUNCTIONS
Journal: Journal of Nigerian Mathematical Society, 2014
Author: J. T. EGHWERIDO1 AND T. O. OBILADE
Utilization of Nigerian precious Resource in the Niger Delta Region for the benefit of the Ecosystem ...
Journal: International Journal of Engineering and Technology (IJET), 2014
Author: Okotie Sylvester and Ikporo Bibobra
Enabling a Viable Technique for the Optimization of LNG Carrier Cargo Operations
Journal: Journal of Marine Science and Application, 2016
Author: Onakoya Rasheed Alaba T. C. Nwaoha and M. O. Okwu
Thermal stability of pulverized palm kernel shell (PKS) based friction lining material locally deve ...
Journal: ChemXpress , 2014
Author: Mgbemena, C.O., Mgbemena, C.E. Okwu, M.O.
Influence of Thermal cycling on the fatigue resistance of Medium Carbon Steel.
Journal: Open Journal of Advanced Engineering Techniques,, 2013
Author: Orumwense, F.F.O., Agbadua, S.A., Mgbemena, C.O., Ubani, N.O.