PUBLICATIONS
Development of a New Flux for Aluminium Gas Welding
Journal: Advanced Materials Research, 1994
Author: Joseph I. Achebo, A.O. Akii Ibhadode
Simplified Empirical Correllation for estimating effective oil permeability and some fluid parameter ...
Journal: Global journal of Engineering and Technology, India, 2011
Author: Akpoturi Peters and Onwuachi- Iheagwara P .N
Finite Element Analysis and Design Validation of High Pressure Gate Valve for a Typical Nigerian Oil ...
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: ThankGod E. Boye, Thaddeus C. Nwaoha, Adeyemi I. Olabisi
A Mixed Model Analysis of a Fertilizer Experiment on Oil Palm in Nigeria
Journal: Agricultural Sciences, 2016
Author: Edwin A. Iguodala, Eghwerido Joseph Thomas, Austin Edokpayi, Obilade Titilola
Gas Lift a tool to Production Optimization
Journal: International Journal of Oil, Gas and Coal Engineering, 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ovuema Augustina
Directional Well Trajectory Design : The Theoretical Development of Azimuth Bends and turns in compl ...
Journal: Nigerian journal of technology (NIJOTECH), 2016
Author: P.O Okpozo, Akpoturi Peters, W.C Okologume
Relationship between alteration rare-earth element distribution and mineralization of the Ririwai Zn ...
Journal: African Jour. Sci. and Technology, , 1990
Author: Imeokparia, E.G., and Chalokwu, C.I
Optimization of coconut oil ethyl esters reaction variables and prediction model of its blends with ...
Journal: http://www.tandfonline.com/loi/tbfu20, 2016
Author: Olusegun David Samuel, Solomon Olanrewaju Giwa Abdulssalam El- Suleiman
Effects of Turning Parameters on Metal Removal and Tool Wear Rates for Low Carbon Steel
Journal: Nigerian Journal of Technology (NIJOTECH), 2016
Author: Mgbemena C.O Mgbemena C.E, Etebenumeh G, and Ashiedu F. I.
Identification and Morphology of pathogens in liquid effluent from a biodigester with cow dung feed ...
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2020
Author: Ogunkeyede A.O, Okorhi-Damisa B.F, Tedjere E, and Adeniyi S.
Effect of Sand invasion on Oil Well Production: A Case study of Garon Field in the Niger Delta
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Bibobra Ikporo and Okotie Sylvester
Simulation and experimental verification of completely closed cavity die forging on a mechanical pre ...
Journal: Proc. Institution of Mechanical Engineers, 1989
Author: IBHADODE, A.O.A. and DEAN, T.A
Road Traffic Accident in Nasarawa State: Case study of Road Safety, Keffi Unit Command
Journal: The Nasara Journal of Humanities., 2005
Author: Onosemuode Christopher
Design and Finite Element Analysis of Double - Acting, Double - Ends Hydraulic Cylinder for Industri ...
Journal: American Journal of Engineering Research (AJER), 2017
Author: ThankGod E. Boye, Adeyemi, I. Olabisi,Eyere E. Emagbetere
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: International Journal of Machine Tools and Manufacture, 2004
Author: P.E. Amiolemhen, A.O.A. Ibhadode
Design and Development of a Paraplegic Centricity Mobility Aid
Journal: Journal of Emerging Trend in Engineering and Applied Science (JETEAS) , 2012
Author: Ashiedu Festus and Igboanugo A. C.
Implementation of Koha Integrated Library Management Software (ILMS): The Babcock University Experie ...
Journal: Canadian Social Science, 2012
Author: Saturday U. Omeluzor, Olugbenga Adara, Madukoma Ezinwayi, Itunu A. Bamidele and Felicia Oby Umahi
Markov Chain Analysis for Inbreeding and their Genetic Effects.
Journal: International Journal of Numerical Mathematics., 2009
Author: Olaruwanju S.O, Onosemuode C. and Zubair M.A
The Communicative Efficiency of Maps in Tourism Development
Journal: Journal of Research in Tourism., 2007
Author: Onosemuode, Christopher
Effects of Self-regulated learning and Metacognitive learning cycle on the academic achievement of ...
Journal: Open Journal of Advanced Engineering Techniques, , 2013
Author: Inomiesa, E.A., Achufusi, N.N. Mgbemena, C.O.
Manufacture of hand hacksaw blades form locally available mild stee
Journal: The Nigerian Engineer, 1991
Author: IBHADODE, A.O.A. and OJEAH, C.C
A Regression Analysis Approach to Queueing System Modelling: A Case of Banks.
Journal: Journal of Applied Sciences Research,, 2011
Author: Mgbemena, C.E., Mgbemena, C.O., Chinwuko, C.E.
Experimental Study of Induced Vibration and Work Surface Roughness in the Turning of 41Cr4 Alloy S ...
Journal: IJIRSET , 2013
Author: Eze S.C., Izelu, C.O., Oreko B.U., Edward B.A
Experimental Study on a Line-Axis Concentrating Solar Energy Collector for Water Heating
Journal: Industrial Engineering, 2017
Author: Frederick Ikpakwu, Anthony Okoronkwo, Modestus Okwu, Emmanuel Anyanwu
Minimizing the risk of erosion damage of some wells in Niger Delta Field with clampon DSP monitor
Journal: International Journal of Petroleum Engineering, 2015
Author: Ikporo Bibobra, Okotie Sylvester and Ichenwo John-Lander
Application of re-refined used lubricating oil as base oil for the formulation of oil based drilling ...
Journal: Journal of Petroleum Technology and Alternative Fuels, 2013
Author: Oghenejoboh K. M., Ohimor E. O. and Olayebi O.
Engine Spare Parts Production through Copy Manufacture and Substitution Approach
Journal: Advanced Materials Research, 1994
Author: E.H. Amalu, A.O. Akii Ibhadode
Improved Transmission Equation for Terrestrial FSO Link
Journal: International Journal of Electrical and Electronics Research , 2016
Author: Oluwole J. Famoriji, Kazeem B. Adedeji, and Oludare Y. Ogundepo
Design of DC-link Voltage Controller and Grid Current Controller in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
Evaluation of the Levels of Phthalate Ester Plasticizers in Surface Water of Ethiope River System, N ...
Journal: Journal of Applied Sciences and Environmental Management, 2016
Author: Edjere, O., Asibor, I.G. and Otolo, S.E.
Computer Aided Structural Analysis of Axle Tilting Effect on Tractor Front Axle Support.
Journal: Innovative Systems Design and Engineering,, 2014
Author: Aduloju, S.C., Mgbemena, C.O., Ebhota,W.S., Bolarinwa, G.O.
Distribution pattern, sources and ecological risk assessment of polycyclic aromatic hydrocarbons (PA ...
Journal: Journal of Chemical Society of Nigeria, 2025
Author: Okonkwo, E.O., Nwajei, G.E., Agbaire, P.O. and Tesi, G.O
SUITABILITY OF OKHUEN WOOD (BRACHISTEGIA NIGERICA) AND RECYCLED LOW DENSITY POLYETHYLENE FOR COMPOSI ...
Journal: The Nigerian Academy of Science, 2014
Author: C.U. Atuanya1, and A.O.A. Ibhadode FAS2,
Development and Assessment of Composite Brake Pad Using Pulverized Cocoa Beans Shells Filler
Journal: International Journal of Materials Science and Applications, 2016
Author: Adeyemi Ibukun Olabisi Ademoh Nuhu. Adam Okwu Modestus Okechukwu
Feature Oriented Performance Analysis of the Social Media
Journal: International Journal of Innovative Science, Engineering Technology, 2022
Author: Oyemade, D. A. ,Allenotor, D.
PERFORMANCE OF AN AUTOMOTIVE BUMPER FROM LALLOH 2 (Corchorustriden L.) PLANT FIBRE REINFORCED EPOXY ...
Journal: Nigerian Journal of Technology (NIJOTECH), 2016
Author: M Sumaila, AOA Ibhadod
pH Level Activity in Crude oil Contaminated Soil Bio remediated with natural sources
Journal: journal of Engineering and Applied Scientific Research, 2014
Author: Akpoturi P.E
Fuzzy Based System for Power Consumption Prediction
Journal: Journal of Engineering Science and Computing, , 2017
Author: EMAGBETERE, Eyere, BOYE, E. ThankGod, OGHENEVWAIRE, S. Iyabo
Thermal Cycling Effects on the Fatigue Behaviour of Low Carbon Steel.
Journal: Journal of Minerals and Materials Characterization and Engineering, , 2011
Author: Mgbemena, C.O., Agbadua, S.A., Mgbemena, C.E., Chima, L.O.
The Design of a Linear Quadratic Optimal Regulator for Transient Heat flow in Continuous Casting of ...
Journal: International Journal of Current Research, 2016
Author: Obinabo E. C. Izelu C. O. Nwaoha T. C. and Ashiedu F. I.
Justification for Oil Well Stimulation
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Okotie Sylvester, Ubani C. E., Ikporo Bibobra
Utilization of Nigerian precious Resource in the Niger Delta Region for the benefit of the Ecosystem ...
Journal: International Journal of Engineering and Technology (IJET), 2014
Author: Okotie Sylvester and Ikporo Bibobra
Cadastral Mapping using GIS Techniques in Urban Development
Journal: The Nigeria Academic Forum, 2006
Author: Onosemuode, Christopher
Shot Configuration Suitable for Optimizing Foldage and Offset around Areas with Non-Seismic Objects
Journal: AMERICAN JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH, 2013
Author: G. I. Alaminiokuma and D. O. Ogagarue
Near-surface structural model for enhanced seismic data acquisition and processing in North-Central ...
Journal: AMERICAN JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH, 2012
Author: G. I. Alaminiokuma and J. Amonieah
The Instrumentality of Manufacturing in Translating Poverty to Prosperity
Journal: Inaugural Lecture Series, 2006
Author: Ibhadode, A.O.A.
Effects of breadfruit seed hull ash on the microstructures and properties of AlSiFe alloy/breadfruit ...
Journal: undefined!, 2012
Author: C.U.AtuanyaaA.O.A.Ibhadode.M.Dagwac
Empirical Model for Bioethanol Production Process from Corn Stover Using Response Surface Methodolog ...
Journal: International Journal of Emerging Trends in Engineering and Development, 2016
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora, Eke Akachukwu Ben
Corner filling characteristics in precision forging
Journal: International Journal of Machine Tools and Manufacture , 1988
Author: A.O.A. Ibhadode,T.A.Dean
Advances in materials and systems technologies IV : selected, peer reviewed papers from the 4th Inte ...
Journal: Advanced materials research, 2013
Author: Ibhadode, A. O. Akii / Aluyor, E.O.