PUBLICATIONS
Second Law Analysis of Mass Transfer Effect on Unsteady MHD Flow Past an Accelerated Vertical Porous ...
Journal: International Journal of Pure and Applied Sciences and Technology, 2014
Author: Okedoye Akindele Michael
Design and Manufacture of a 30-ton Hydraulic Press
Journal: Mechanical Engineering Department, Federal University of Technology , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Effects of Sodium Hydroxide Concentration on the Physical Properties of Zeolite Produced from Local ...
Journal: European Journal of Scientific Research, 2011
Author: Oghenejoboh, K. M. and Ohimor, E. O.
Modeling to Support using Crouch Technique to Lift Low-Lying Objects
Journal: Journal of the Nigerian Association of Mathematical Physics , 2012
Author: Igboanugo, A. C. Ashiedu, F. And Onifade M. K.
A combined algorithm approach to fuel consumption rate analysis and prediction of sea-worthy diesel ...
Journal: Journal of Engineering for the Maritime Environment, 2016
Author: Thaddeus C Nwaoha Garrick Ombor and Modestus O Okwu
Evaluation of the Cost and Effect of Industrial Accidents
Journal: European Journal of Scientific Research, 2015
Author: Yusuf, T.A., Ismaila, S.O., Kuye, S.I. and Samuel, O.D.
Virtual Remote Control System Using Embedded Systems with Internet of Things
Journal: FUPRE Journal of Scientific and Industrial Research (FJSIR), 2024
Author: Nwachukwu, K., Oyemade, D. A.
Optimization of Nigerian Restaurant Waste Cooking Biodiesel Reaction Parameters using Response Surfa ...
Journal: International Journal of Energy Optimization and Engineering, 2014
Author: Waheed, M.A., Samuel, O.D., Bolaji, B.O. and Dairo, O.U.
Geochemistry and Environmetric Approaches to Estimating Pollution Impacts on soils around Okaba Coa ...
Journal: Brit. Jour of Applied Science and Technology, 2014
Author: Ameh, E.G. Imasuen, I.O. and Imeokparia, E.G
Use of inequalities in the determination of control systems compensation parameters
Journal: Advances in Modeling Analysis C. AMSE Press, 1993
Author: IBHADODE, A.O.A
Performance evaluation of a prototype two component cutting force lathe dynamometer
Journal: journal and technology research, 2016
Author: A.O.Akii Ibhadode
Predicting Reservoir Behavoiur using Mathematical Model 2: Water underunning.
Journal: Journal of Engineering and Applied Scientific Research, 2015
Author: Akpoturi Peters
Regression Analysis And The Use of SPOT Remotely Sensed Data in Monitoring Environmental Changes..
Journal: Asian Journal of Information Technology (AJIT) , 2007
Author: Onosemuode, C and Olanruwanju, S
Towards an Enhanced Product Line Engineering Process Model
Journal: Benin Journal of Advances in Computer Science, 2019
Author: Oyemade, D. A, Onibere, E. A.
Isolation and Characterization of Hydrocarbon Utilizing Yeast (HUY) Isolates from Palm Wine
Journal: American Journal of Molecular Biology, 2016
Author: Okerentugba, P.O., Ataikiru, T.L. and Ichor, T.
Design and Development of a Manual Pump for Agrarian Communities
Journal: International Journal of Current Research , 2016
Author: Ashiedu F. I., Nwaoha T. C. and Izelu C. O.
Pivot Hole Thickness Optimization and Material Design for Functional Requirement of Front Axle Suppo ...
Journal: American Journal of Materials Science and Application , 2014
Author: Aduloju, S.C., Mgbemena, C.O., Maduike, J. Abdurahman, J.
Assessment of Soil Quality for Sustainable Agricultural Development in Kaita, Katsina State, Nigeria
Journal: International Journal of Sustainable Development. , 2011
Author: Onosemuode, C Umunade O. Charleston. .
Design and Development of a 10 Million Liters Capacity Petroleum Product Storage Tank.
Journal: The International Journal Of Engineering And Science (IJES)., 2016
Author: D.R. Enarevba, C.O. Izelu, B.U. Oreko and E. Emagbetere
The Evaluation of Domestic Energy need and Consumption Pattern in Kokona Local Government Area, Nasa ...
Journal: Journal of Environmental Studies., 2007
Author: Onosemuode, C and Onosemuode, S.A
Technical Properties of some plant fibres compared with glass fibre
Journal: International Journal of Engineering research in Affrica, 2014
Author: M. Sumaila, Ao. Ibhadode
A Typified Greedy Dynamic Programming Model for the MetaTrader Platform
Journal: Journal of Advances in Mathematical and Computational Sciences, 2020
Author: Oyemade, D. A.
Assessment of Water Suitability for Irrigation in Keffi, Nasarawa State, Nigeria
Journal: International Journal of Sciences, 2016
Author: Onosemuode C, Ataikiru T. L, Osayomwanbor E. O
A Stochastic Model for Face Detection
Journal: Advances in Multidisciplinary Research Journal, 2016
Author: Ojugo, A. A., Allenotor, D., Oyemade, D. A.
APPLICATION OF CASSAVA PEELS ACTIVATED CARBON IN THE TREATMENT OF OIL REFINERY WASTEWATER A COMPARA ...
Journal: Journal of Ecological Engineering, 2016
Author: Kigho Moses Oghenejoboh, Smith Orode Otuagoma, Evuensiri Onogwharite Ohimor
Finite Element Analysis and Design Validation of High Pressure Gate Valve for a Typical Nigerian Oi ...
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: ThankGod E. Boye, Thaddeus C. Nwaoha and Adeyemi I. Olabisi
The viability of compressed natural gas (CNG) as an alternative automobile fuel in Nigeria
Journal: Journal of Social Management Sciences, 1997
Author: AKELE, S.M.G. and IBHADODE, A.O.A.
Numerical Investigation of Thermo-Mechanical Behaviour of Ball Grid Array Solder Joint at High Tempe ...
Journal: ADVANCED MATERIALS RESEARCH -ZUG-, 2012
Author: Amalu, E.H. / Ekere, N.N. / Bhatti, R.S. / Mallik, S. / Takyi, G. / Ibhadode, A.O.A.
Analytical Solution of MHD Free Convective Heat and Mass Transfer Flow in a Porous Medium.
Journal: The Pacific Journal of Science and Technology, 2013
Author: Akindele Michael Okedoye Ph.D.
Distribution pattern, sources and ecological risk assessment of polycyclic aromatic hydrocarbons (PA ...
Journal: Journal of Chemical Society of Nigeria, 2025
Author: Okonkwo, E.O., Nwajei, G.E., Agbaire, P.O. and Tesi, G.O
Development of a New Flux for Aluminium Gas Welding
Journal: Advanced Materials Research, 1994
Author: Joseph I. Achebo, A.O. Akii Ibhadode
FAITH Software Life Cycle Model for Forex Expert Advisors
Journal: Journal of Advances in Mathematical and Computational Sciences, 2021
Author: Oyemade, D. A., Allenotor, D.
PERFORMANCE OF AN AUTOMOTIVE BUMPER FROM LALLOH 2 (Corchorustriden L.) PLANT FIBRE REINFORCED EPOXY ...
Journal: Nigerian Journal of Technology, 2016
Author: M. Sumaila and A. O. A. Ibhadode
A Financial Option Based Price and Risk Management Model for Pricing Electrical Energy in Nigeria
Journal: Advances in Multidisciplinary and Scientific Research Journal, 2017
Author: D. Allenotor and A.A. Ojugo
A HIGHER ODER POLYNOMIAL FOR OPTIMAL PRICING AND REPLENISHMENT STRATEGIES FOR A RETAIL/DISTRIBUTION ...
Journal: International Journal of Scientific Engineering and Applied Science (IJSEAS), 2015
Author: A. M. Okedoye,P PPh.D
A Time Function Havlena and Odeh MBE Straight Line Equation
Journal: Onepetrol Journal, 2015
Author: Stanley Buduka., Biu Victor T., and Okotie Sylvester
Design of a Photovoltaic Grid-Connected DC-AC Inverter
Journal: International Journal of Emerging trends in Engineering and Development, 2012
Author: (6) Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
The Use of Geoinformatics in Site Selection for Suitable Landfill for Poultry Waste: A Case Study of ...
Journal: International Journal of Sciences, 2016
Author: Onosemuode C. and Abodurin W.A
Effects of Sodium Hydroxide Concentration on the Physical Properties of Zeolite Produced from Local ...
Journal: European Journal of Scientific Research, 2011
Author: Oghenejoboh, K. M. and Ohimor, E. O.
IMPLEMENTATION OF A MICROCONTROLLER BASED PURE SINE WAVE INVERTER
Journal: International Journal of Scientific Engineering and Applied Science (IJSEAS), 2017
Author: GODSWILL OFUALAGBA AND CHARLES KEVWE IGBINOBA
Simulation and experimental verification of completely closed cavity die forging on a mechanical pre ...
Journal: Proc. Institution of Mechanical Engineers, 1989
Author: IBHADODE, A.O.A. and DEAN, T.A
Material Requirement Planning of MISO Production Process using Transfer Function: A Case Study of So ...
Journal: Journal of the Nigeria Association of Mathematical Physics. , 2016
Author: S. Okiy, B.U. Oreko and C.C. Nwobi-Okoye
A combined algorithm approach to fuel consumption rate analysis and prediction of sea-worthy diesel ...
Journal: Journal of Engineering for The Maritime Environment, 2016
Author: Thaddeus C Nwaoha Garrick Ombor and Modestus O Okwu
Facilitating Hazard Analysis of LNG Carrier Operations via Risk Matrix Approach
Journal: International Journal of Science and Technology, 2016
Author: Thaddeus C. Nwaoha Jasper Agbakwuru Modestus O. Okwu
Electricity Generation and Distribution in Nigeria: Technical Issues and Solutions.
Journal: International Journal of Engineering Science and Technology, 2011
Author: Chinwuko, E.C., Mgbemena, C.O., Ebhota, S.W Nwuba, E.I.U.
Laser Surface Micro/nano Patterning for Improving Aerodynamic Performance
Journal: Ph. D Thesis, 2015
Author: Otanocha, O.B
Potentiation of the Antimicrobial Activity of 4-Benzylimino-2,3-Dimethyl-1-Phenylpyrazal-5-One by Me ...
Journal: Res J Chem Sci, 2011
Author: E.E.Elemike, A.P.Oviawe and I.E.Otuokere
NUMERICAL MODELLING OF CURRENT ON WAVE DRIFT LOAD OF A SHIP SHAPED OFFSHORE STRUCTURES (CASE STUDY - ...
Journal: IJRDO-Journal of Mechanical And Civil Engineering, 2017
Author: Abam, Tamunopekere Joshua, Agbakwuru, Jasper Ahamefulal, Adeyemi, I. Olabisi
Development of a Manual Metal Arc Welding Flux from Local Raw Materials in Nigeria
Journal: Applied Mechanics and Materials, 2004
Author: Oyawale Festus Adekunle, Odior Andrew Oyakhobo, Ibhadode Akii
Justification for Oil Well Stimulation
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Okotie Sylvester, Ubani C. E., Ikporo Bibobra