PUBLICATIONS
Application of Electrical Resistivity Method in the Assessment of Groundwater Potential for Sustanab ...
Journal: Annals of Environmental Studies, 2016
Author: Onosemuode, C., Ataikiru, T. L. and Oghama, O. E.
2D static failure prediction for critical stresses of an automobile tire sidewall using MATLAB PDETo ...
Journal: IOSR-Journal of Mechanical Civil Engineering,, 2014
Author: Ihueze, C.C., Mgbemena, C.O., Menon, A.R.R.
Phthalate esters in raw and finished water from drinking water treatment plants and human exposure i ...
Journal: African Scientist, 2025
Author: Okpara K.E. and Tesi, G.O.
Development of Asbestos-Free Friction Lining Material from Palm Kernel Shell
Journal: Journal of the Brazilian Society of Mechanical Sciences, 2008
Author: A. O. A. Ibhadode, I. M. Dagwa
Optimization of Nigerian Restaurant Waste Cooking Biodiesel Reaction Parameters using Response Surfa ...
Journal: International Journal of Energy Optimization and Engineering, 2014
Author: Waheed, M.A., Samuel, O.D., Bolaji, B.O. and Dairo, O.U.
EFFECT OF LEMON JUICE ON THE KINECTICS OF FERMENTATION OF PALM WINE
Journal: Asian J Sci Tech, 2012
Author: A. S. Ekop, N. D. Eyop and E. E.Elemike
Adjustment to Oil Saturation Estimate Due to Various Reservoir Drive Mechanisms
Journal: International Journal of Advanced Petroleum Engineering and Technology, 2014
Author: Okotie Sylvester and Ikporo Bibobra
Geostatistical Analysis of well Velocity Data for Enhanced Depth Imaging in the Niger Delta
Journal: Journal of Applied Geology and Geophysics, 2017
Author: G. I. Alaminiokuma and W. N. Ofuyah
Strategies to enhance Environmenatally Conscious Engineering safety Practices in Nigeria
Journal: journal of Engineering Studies, 2005
Author: Akpoturi P.E
Towards an Enhanced Product Line Engineering Process Model
Journal: Benin Journal of Advances in Computer Science, 2019
Author: Oyemade, D. A, Onibere, E. A.
Experimental Study on a Line-Axis Concentrating Solar Energy Collector for Water Heating
Journal: Industrial Engineering, 2017
Author: Frederick Ikpakwu, Anthony Okoronkwo, Modestus Okwu, Emmanuel Anyanwu
Sequestering of Fe and Pb ions from Wastewater by Canarium schweinfurthii after carbonization and ch ...
Journal: Journal of Applied Science and Environmental Management, 2016
Author: Bassey Uwem, Oghenekohwiroro Edjere and Solomon Ebiye Otolo
Experimental Study of Induced Vibration and Work Surface Roughness in the Turning of 41Cr4 Alloy S ...
Journal: IJIRSET , 2013
Author: Eze S.C., Izelu, C.O., Oreko B.U., Edward B.A
Indigenous development of a 3horsepower petrol engine
Journal: Nigerian Journal of Engineering Research and Development, 2006
Author: IBHADODE, A.O.A. and AMALU, E.H.
Environmental Pollution from Port Harcourt Refinery - A System Approach
Journal: journal of Engineering and Environmental Studies, 2006
Author: Akpoturi P.E
Shot Configuration Suitable for Optimizing Foldage and Offset around Areas with Non-Seismic Objects
Journal: AMERICAN JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH, 2013
Author: G. I. Alaminiokuma and D. O. Ogagarue
The Pareto principle and Hazard model as tools for appropriate scheduled maintenance in a manufactur ...
Journal: African Journal of Science, Technology, Innovation and Development, 2016
Author: Fadeyi, J.A., Okwu, M.O., Mgbemena, C.O., Ezekiel, K.C. (2016).
The use of SPOT Remotely Sensed Data in Monitoring Environmental Changes in Warri Metropolis
Journal: The Nigeria Journal of Research and Production, 2004
Author: Onosemuode Christopher
Precision die design by the die expansion method
Journal: Materials science foundations, 2009
Author: Ibhadode, A. O. Akii
Software for Reservoir Performance Prediction
Journal: Onepetrol Journal, 2015
Author: Okotie, Sylvester. and Onyekonwu Mike
Performance Evaluation of Polydimethylsiloxane-Solvent Blends as Defoamer for Crude Oil Foam
Journal: International Conference on Engineering for a Sustainable World(ICESW), 2018
Author: Ohimor Evuensiri Onoghwarite, Erude Abraham Okeoghene, Onocha Ovonomo, Oreko Benjamin Ufuoma and Ononiwu Prosper Ikechuk
Comparative Stochastic Study for Credit-Card Fraud Detection Models
Journal: IEEE African Journal of Computing ICT, 2015
Author: Ojugo, A. A., Oyemade, D. A., Allenotor, D., Longe, O. E., Anujeonye, C.
A Contingent Claim Approach to Bank Valuation
Journal: Journal of Mathematical Finance, 2014
Author: Enahoro Alfred Owoloko, Nicholas Amienwan Omoregbe, Michael Akindele Okedoye
2014: Heavy Metal Contamination and Distribution in Soils around Pb-Zn mines of Abakaliki district, ...
Journal: Frontiers in Geosciences, 2014
Author: Onyeobi, T.U.S. and Imeokparia, E.G.,
Application of Linear Programming Model and Sensitivity Analysis in Multi Source Multi Destination S ...
Journal: Canadian International Journal of Science and Technology, Ontario Canada, 2017
Author: M. O.Okwu, F.I Ashiedu, Joachim Gidiagba, and A. Adedoyin
Picosecond laser surface micro-texturing for the modification of aerodynamic and dust distribution c ...
Journal: Cogent Engineering , 2016
Author: Omonigho B. Otanocha, Li Lin, Yuanye Zhou, Shan Zhong Liu Zhu
Optimisation of Alkaline Ethanolysis of Biodiesel Yield from Nigerian Coconut Oil using One Variable ...
Journal: JENRM, 2014
Author: Samuel O.D., Okwu M. O., Oreko U.O., Amosun S. T.
Cost-Saving and Internally Generated Revenue in Tertiary Educational Institutions: The Role of Cloud ...
Journal: International Journal of Education and Information Technology, 2018
Author: Orobor Anderson Ise, Orobor Helen Elohor
Strategies 1: Enhancing Environmenatally Conscious Engineering safety Practices in Nigeria
Journal: journal of Engineering Studies, 2005
Author: Akpoturi P.E
Performance Evaluation of a Pilot Paraplegic Centricity Mobility Aid
Journal: Nigeria Journal of Technology (NIJOTECH), 2016
Author: Ashiedu F. I., Popoola E. O., and Akpan E. E.
The Advocacy of GIS in the Police Force for Crime Detection, Prevention and Control: A Case Study o ...
Journal: The Nigeria Academic Forum, 2003
Author: Onosemuode Christopher
The influence of Creep on the Mechanical properties of Calcium Carbonate Nanofiller Reinforced Polyp ...
Journal: Journal of Minerals and Materials Characterization and Engineering. , 2011
Author: Ihueze, C.C., Mgbemena, C.O., Ugwu, S.
A Simple Procedure for Calculating shut -in Tubing Pressure (SITP)
Journal: Journal of Engineering and Applied Scientific Research, 2014
Author: Akpoturi Peters
Assessment of the activities of scavengers and their economic impacts in waste recovery in Warri met ...
Journal: International Research Journal of Public and Environmental Health, 2017
Author: Asibor Godwin, Edjere Oghenekohwiroro
Seismic Refraction Data Analyses: A Software for Low Velocity Layer Interpretation in the Niger Delt ...
Journal: Petroleum Technology Development Journal, 2017
Author: G. I. Alaminiokuma and T. Warmate
Determination of Hydrocarbon Properties produced from different oil fields in Nigeria
Journal: journal of Engineering Science and Technology, 2010
Author: Otitigbe F and Akpoturi P.E
Modified Screw Jack for Lifting Operation in Industrial Setting
Journal: International Journal of Engineering and Technologies, 2017
Author: Benjamin Ezurike, Modestus O. Okwu
Protoliths and Petrogenesis of Precambrian gneisses from the Igbeti Area Southwest Nigeria
Journal: Chemie der Erde, 1991
Author: Imeokparia, E.G., and Emofurieta, W.O
Characterization of Kaolin intercalates of Oleochemicals derived from Rubber Seed (Hevea brasiliensi ...
Journal: Journal of King Saud University-Science, 2013
Author: Mgbemena, C.O., Ibekwe, N.O., Mohamed, A.P., Menon, A.R.R. Sukumar, R.
Carbon Nanotube: The Building Blocks of Nanotechnology Development.
Journal: J.Nanotech. Prog. Int. (JONP) , 2016
Author: Boye, E.T., Achadu, J.O, Oreko, B.U and Samuel, O.D
SYNTHESIS, SPECTROSCOPIC CHARACTERIZATION AND ANTI-MICROBIAL ACTIVITIES OF (Z)-4-(4-(DIMETHYLAMINO)B ...
Journal: Scientia Africana, 2015
Author: E. E. Elemike, A. P. Oviawe and O. Iyekowa
Cloud Computing Model for Virtual Libraries Implementation in Nigerian Tertiary Institutions
Journal: International Journal of Open Information Technologies, 2017
Author: Abdulwaheed YusufIse Anderson OroborAtanda Sambo
Effect of Turning Parameters on Metal Removal and Tool Wear Rates of AISI 1018 Low Carbon Steel.
Journal: Nigerian Journal of Technology,, 2016
Author: Mgbemena, C.O., Mgbemena, C.E., Ashiedu, F.I. Etebenumeh, G. O.
A survey of traditional foundries and forge shops and a training programme for traditional metal cra ...
Journal: Benin Journal of Educational Studies, 1999
Author: IBHADODE, A.O.A
Laser Surface Micro/nano Patterning for Improving Aerodynamic Performance
Journal: Ph. D Thesis, 2015
Author: Otanocha, O.B
A Multivariate linear Regression Theoretic Approach to Modelling Road Traffic Accidents in Nigeria.
Journal: Journal of the Nigeria Association of Mathematical Physics., 2016
Author: B.U. Oreko, S. Okiy, C.C. Nwobi-Okoye and A.C Igboanugo
A Novel Framework for Student Result Computation as a Cloud Computing Service
Journal: American Journal of Systems and Software, 2015
Author: Orobor Anderson Ise
Deformation of solid cylindrical forgings in a completely closed cavity die
Journal: Nigerian Society of Engineers Technical Transactions, 1993
Author: IBHADODE, A.O.A. and DEAN, T.A
Technical Properties of Some Plant Fibres Compared with Glass Fibre
Journal: International Journal of Engineering Research in Africa, 2010
Author: M. Sumaila, A.O. Akii Ibhadode
A Mixed Model Analysis of a Fertilizer Experiment on Oil Palm in Nigeria
Journal: Agricultural Sciences, 2016
Author: Edwin A. Iguodala, Eghwerido Joseph Thomas, Austin Edokpayi, Obilade Titilola