PUBLICATIONS
Design of DC-link Voltage Controller and Grid Current Controller in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
A Simple Procedure for Calculating shut -in Tubing Pressure (SITP)
Journal: Journal of Engineering and Applied Scientific Research, 2014
Author: Akpoturi Peters
Assessment of organophosphate pesticides in soils and vegetables from agricultural areas of Delta Ce ...
Journal: Scientific Reports , 2025
Author: Tesi, G.O., Okpara, K.E., Tesi, J.N., Agbozu, I.E. and Techato, K.
Work Flow for Reservoir Study and Challenges
Journal: Onepetrol Journal, 2015
Author: Okotie Sylvester. and Stanley Buduka. and Ikporo Bibobra
Static Analysis of Tyre Model Developed from Natural Rubber Vulcanizates.
Journal: Lecture Notes in Computer Science, 2016
Author: Mgbemena, C.O., Mgbemena, C.E., Ashiedu, F.I. Menon, A.R.R. Oral Paper presented at The 2016 International Conference
Assessment of the Impacts of Refinery Effluent on the Physico-chemical Properties of Ubeji Creek, De ...
Journal: Journal of Environmental Analytical Toxicology , 2017
Author: Eunice OE, Frank O, Voke U, Godwin A
Effect of Sand invasion on Oil Well Production: A Case study of Garon Field in the Niger Delta
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Bibobra Ikporo and Okotie Sylvester
An investigation of the efficacy of enhanced oil recovery by means of micro-organisms in Niger Delta ...
Journal: J. Pet. Gas Explor. Res., 2014
Author: - Ikporo Bibobra. and Okotie Sylvester.
Utilization of cellulosic cassava waste for bio-ethanol production
Journal: JECE, 2015
Author: Elias E.Elemike, Ojiefoh C.Oseghale, Anthony C.Okoye
Empirical Model for Bioethanol Production Process from Corn Stover Using Response Surface Methodolog ...
Journal: International Journal of Emerging Trends in Engineering and Development, 2016
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora, Eke Akachukwu Ben
A combined algorithm approach to fuel consumption rate analysis and prediction of sea-worthy diesel ...
Journal: Journal of Engineering for The Maritime Environment, 2016
Author: Thaddeus C Nwaoha Garrick Ombor and Modestus O Okwu
Performance Evaluation of a Pilot Paraplegic Centricity Mobility Aid
Journal: Nigeria Journal of Technology (NIJOTECH), 2016
Author: Ashiedu F. I., Popoola E. O., and Akpan E. E.
Leachate Characterization and Assessment of Surface and Groundwater Water Qualities near Municipal S ...
Journal: Ethiopian Journal of Environmental Studies and Management, 2016
Author: Asibor Godwin, Edjere Oghenekohwiroro and Ebighe Daniel
Towards an Enhanced Product Line Engineering Process Model
Journal: Benin Journal of Advances in Computer Science, 2019
Author: Oyemade, D. A, Onibere, E. A.
Potentiation of the Antimicrobial Activity of 4-Benzylimino-2,3-Dimethyl-1-Phenylpyrazal-5-One by Me ...
Journal: Res J Chem Sci, 2011
Author: E.E.Elemike, A.P.Oviawe and I.E.Otuokere
High Power Picosecond Laser Surface Micro-texturing of H13 Tool Steel and Pattern Replication onto A ...
Journal: Lasers in Manufacturing and Materials Processing, 2016
Author: Otanocha, O.B., Li, L., Zhong, S. and Liu, Z
Impact of Brewery Factory Effluent on the physicochemical Characterizes of Ikpoba River in Edo State ...
Journal: Resource and Environment, 2016
Author: Oghenekohwiroro Edjere, Albert C. Ibezute, Sandra U. Ibezute
Social Networking Tools in Library Service Delivery: The Case of Academic Libraries in South-East Z ...
Journal: DESIDOC Journal of Library Information Technology, 2016
Author: Saturday U. Omeluzor, Gloria O. Oyovwe-Tinuoye and Imam Abayomi
The Impact of 3D Printing Technology to the Nigerian Manufacturing GDP
Journal: Modern Mechanical Engineering, 2018
Author: A. Balogun, V. , B. Otanocha, O. and O. Ibhadode, A.
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: INTERNATIONAL JOURNAL OF MACHINE TOOLS AND MANUFACTURE, 2004
Author: Amiolemhen, P. E. / Ibhadode, A. O.
Existence and uniqueness, and asymptotic stability analysis of solution of a retarded equation model ...
Journal: icastor Journal of Mathematical Sciences, 2010
Author: Igobi, D. K. and Egwurube, M. and Musa, Samuel and Oyemade, D. A.
APPLICATION OF BOX-BEHNKEN DESIGN FOR THE OPTIMIZATION OF STEAM TURBINE EFFICIENCY
Journal: World Journal of Engineering Research and Technology, 2017
Author: Eyere Emagbetere, Festus I. Ashiedu, Olusegun D. Samuel and Modestus O. Okwu
Performance Evaluation of the Predictive Models for Free Fatty Acid Content and Biodiesel Yield from ...
Journal: International Journal of Engineering Research Technology (IJERT), 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
The Effect of Billet Location on Completely Closed Cavity Die Forging
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
The Role of Remote Sensing and Geographic Information System (GIS) in Forest Reserve Management and ...
Journal: The Nigeria Journal of Research and Production, 2006
Author: Onosemuode Christopher
A Contingent Claim Approach to Bank Valuation
Journal: Journal of Mathematical Finance, 2014
Author: Enahoro Alfred Owoloko, Nicholas Amienwan Omoregbe, Michael Akindele Okedoye
Polychlorinated Biphenyls (PCBs) levels in Cured Paints from Southern Nigeria
Journal: Nigerian Journal of Applied Sciences, 2017
Author: Edjere, O., Asibor, I. and Otolo, S, Bassey, U.
Indigenous development of a 3horsepower petrol engine
Journal: Nigerian Journal of Engineering Research and Development, 2006
Author: IBHADODE, A.O.A. and AMALU, E.H.
The Application of Artificial Neural Network in Prediction of the Performance of Spark Ignition Engi ...
Journal: International Journal of Engineering and Technologies, 2017
Author: O.C. Nwufo, Modestus O. Okwu, C. F. Nwaiwu, J.O. Igbokwe, E. E. Anyanwu
Carbon Nanotubes: The Building Blocks of Nanotechnology Development
Journal: J.Nanotech. Prog. Int. , 2016
Author: Boye E. T., Achadu J.O., Oreko B.U., Samuel O.D.
EXPERIMENTAL DETERMINATION OF THE EFFECT OF NOTCH SHAPE ON WEIR FLOW CHARACTERISTICS USING CONSTANT ...
Journal: Asian Journal of Current Research (AJOCR), 2017
Author: ADEYEMI I. OLABISI, ABAM TAMUNOPEKERE JOSHUA AND OREKO U. BENJAMIN
Performance evaluation of a prototype two component cutting force lathe dynamometer
Journal: journal and technology research, 2016
Author: A.O.Akii Ibhadode
Design and Development of a Paraplegic Centricity Mobility Aid
Journal: Journal of Emerging Trend in Engineering and Applied Science (JETEAS) , 2012
Author: Ashiedu Festus and Igboanugo A. C.
THE SECURITY PROVIDER... Social Responsibility and Customer Satisfaction
Journal: Security, 2020
Author: Onakpoma Oboroghenerukohwo
Design of a Photovoltaic Grid-Connected DC-AC Inverter
Journal: International Journal of Emerging Trends in Engineering and Development, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
Petrological and Geochemical Characteristics of some Mesozoic granitic rocks hosting Sn-Nb-W-U miner ...
Journal: Petrogenesis and Minealization of Ganitoids Science Press, Beijing, China, 1992
Author: Imeokparia, E.G.
Delineating the Proper Shooting Medium for Seismic Reflection Survey in the Greater Ughelli Depobelt ...
Journal: Geophysics Remote Sensing, 2014
Author: Alaminiokuma, G. I. and Emudianughe, J. E.
Assessment of the Social and Environmental Impacts of Keffi-Lafia Federal Highway.
Journal: International Journal of Physical Science. , 2011
Author: Onosemuode, C and Akwa, L
The Communicative Efficiency of Maps in Tourism Development
Journal: Journal of Research in Tourism., 2007
Author: Onosemuode, Christopher
Picosecond laser surface micro-texturing for the modification of aerodynamic and dust distribution c ...
Journal: Cogent Engineering , 2016
Author: Omonigho B. Otanocha, Li Lin, Yuanye Zhou, Shan Zhong Liu Zhu
A Factorial Study of Accessibility Requirements of Paraplegics in a Built-up Environment
Journal: Journal of Innovative Research in Engineering and Science (JOIRES), 2011
Author: Ashiedu, F. And Igboanugo A. C.
Optimal transesterification duration for biodiesel produced from waste frying oil
Journal: British Journal of Renewable Energy,, 2015
Author: Samuel, O.D., Amosun, S.T. and Boye, T.E.
Office Noise Pollution in industrial and commercial premises in Nigeria
Journal: Nigerian journal of Industrial and Systems Studies (NJISS), 2005
Author: Akpoturi P E and J Ndukwe
Sugar Cane Cellulosic Waste as a Biofuel Generating Agricultural Residue
Journal: British J Renewable energy, 2016
Author: E. E. Elemike, K. A. Ibe, J. C. Onwuka
A stochastic model for face detection
Journal: Advances in Multidisciplinary and Scientific Research Journal, 2016
Author: A.A. Ojugo., D.A. Oyemade., D. Allenotor
Preliminary study on antimicrobial activity of friendly bacteria isolated from dairy products: Prel ...
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2005
Author: OKORHI F. BEATRICE AND ATAIKIRU TEGA
Modelling and optimization of surface roughness and machining induced vibration 41Cr4 alloy structu ...
Journal: The International Journal Of Engineering And Science (IJES), 2016
Author: Izelu, C.O., Eze, S.C. and Samuel, Olusegun David
Application of Box Behnken Design for the Optimization of Steam Turbine Efficiency
Journal: World Journal of Engineering Research and Technology (WJERT), 2017
Author: Eyere Emagbetere, Ashiedu Festus Ifeanyi, and Samuel, O. D.
Spatio-Dynamics of Surface Water Characteristics in Delta State.
Journal: International Journal of Advanced Remote Sensing and GIS, , 2015
Author: Onosemuode Christopher
Application of re-refined used lubricating oil as base oil for the formulation of oil based drilling ...
Journal: Journal of Petroleum Technology and Alternative Fuels, 2013
Author: Oghenejoboh K. M., Ohimor E. O. and Olayebi O.