PUBLICATIONS
Determination of Thermal Properties of Rock Samples Using Modified Thermal Block Method
Journal: Open access e-Journal, 2012
Author: Olukayode D. Akinyemi, Yemi S. Onifade, Biodun S. Badmus and O.S. Awokola
A Factorial Study of Accessibility Requirements of Paraplegics in a Built-up Environment
Journal: Journal of Innovative Research in Engineering and Science (JOIRES), 2011
Author: Ashiedu, F. And Igboanugo A. C.
Assessment of the activities of scavengers and their economic impacts in waste recovery in Warri met ...
Journal: International Research Journal of Public and Environmental Health, 2017
Author: Asibor Godwin, Edjere Oghenekohwiroro
Design of a Photovoltaic Grid-Connected DC-AC Inverter
Journal: International Journal of Emerging Trends in Engineering and Development, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
Design of DC-link Voltage Controller and Grid Current Controller in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
Spatio-Dynamics of Surface Water Characteristics in Delta State.
Journal: International Journal of Advanced Remote Sensing and GIS, , 2015
Author: Onosemuode Christopher
Hydrogeological Studies for Groundwater resource and its vulnerability to contamination in Owo, Sout ...
Journal: International Journal of Science and Research (IJSR), 2015
Author: Falowo, O.O, and Imeokparia, E.G
Application of Vertical Electrical Sounding to estimate aquifer characteristics of Ihiala and its en ...
Journal: ARPN Journal of Earth Sciences, , 2016
Author: 1. Obiajulu, O.O., Okpoko, E.I. Mgbemena, C.O.
Cost-Saving and Internally Generated Revenue in Tertiary Educational Institutions: The Role of Cloud ...
Journal: International Journal of Education and Information Technology, 2018
Author: Orobor Anderson Ise, Orobor Helen Elohor
Modeling Work Task and the Bending Capabilities of Subjects
Journal: Journal of the Nigerian Association of Mathematical Physics , 2012
Author: Igboanugo, A. C. Ashiedu, F. and Onifade M. K.
Remedation of Crude Oil-Polluted Surface Water Using Aqua-gel Bentonite, Periwinkle Shell Chitosin E ...
Journal: Journal of Ecology and Environment, 2016
Author: Okafor, W.C., Menkiti, M., Okafor, I., Ohimor, E., Onocha, O., Oreko, B., and Sheidu, S.
A Cost-Based Approach for Analysing the Overheads of Multicast Protocols in Non-Strictly Hierarchica ...
Journal: International Journal of Communication Networks and Information Security (IJCNIS), 2011
Author: Akpojaro, J., Aigbe, P., Oyemade, D
A Mixed Model Analysis of a Fertilizer Experiment on Oil Palm in Nigeria
Journal: Agricultural Sciences, 2016
Author: Edwin A. Iguodala, Eghwerido Joseph Thomas, Austin Edokpayi, Obilade Titilola
The Physiochemical Effects of Leachates on Ground water within Okpuno-Egbu Umudim Dumpsite Nnewi, An ...
Journal: Daffodil International University Journal of Science and Technology, , 2013
Author: Momoh, S.O., Mgbemena, C.O., Agbadua, S.A, Matthew, D.O.
Optimization of Nigerian Restaurant Waste Cooking Biodiesel Reaction Parameters using Response Surfa ...
Journal: International Journal of Energy Optimization and Engineering, 2014
Author: Waheed, M.A., Samuel, O.D., Bolaji, B.O. and Dairo, O.U.
Ecological effects of oil spill on pelagic and bottom dwelling organisms in the riverine areas of Od ...
Journal: Journal of Ecology and the Natural Environment. , 2016
Author: Doris Fovwe Ogeleka, Oghenekohwiroro Edjere, Angela Nwudu and Felix Ebodaghe Okieimen
Socio-Economic Consideration of the Use of Maps in Tourism Activities in Nigeria.
Journal: Indian Journal of Multidisciplinary Research,, 2007
Author: Onosemuode, Christopher
Development and Assessment of Composite Brake Pad Using Pulverized Cocoa Beans Shells Filler
Journal: International Journal of Materials Science and Applications, 2016
Author: Adeyemi Ibukun Olabisi., Ademoh Nuhu. Adam, Okwu Modestus Okechukwu,
The effect of die expansion in precision forging
Journal: Journal of the Nigerian Institution of Production Engineers, , 1994
Author: IBHADODE, A.O.A
The Effect of Teaching Methods on Achievement of Senior Secondary Class One Students in Physics.
Journal: International Journal of Advances in Science and Technology,, 2011
Author: Achufusi, N.N., Mgbemena, C.O., Mgbemena, C.E., Nwoye, A.
Evaluation of antibacterial activities of silver nanoparticles green-synthesized using pineapple lea ...
Journal: micron, 2014
Author: Elemike Elias Emeka, Oseghale Charles Ojiefoh, Chuku Aleruchi,Labulo Ayomide Hassan, Owoseni Mojisola Christiana, Mfon R
The Application of Artificial Neural Network in Prediction of the Performance of Spark Ignition Engi ...
Journal: International Journal of Engineering and Technologies, 2017
Author: O.C. Nwufo, Modestus O. Okwu, C. F. Nwaiwu, J.O. Igbokwe, E. E. Anyanwu
Bioethanol production from corn stover using Saccharomyces cerevisiae
Journal: International Journal of Scientific Engineering Research, 2016
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora, Eke Akachukwu Ben and Nsidibe-Obong Ekpe Moses
Material Requirement Planning of MISO Production Process using Transfer Function: A Case Study of So ...
Journal: Journal of the Nigeria Association of Mathematical Physics. , 2016
Author: S. Okiy, B.U. Oreko and C.C. Nwobi-Okoye
Determination of the Contact Angles of Kaolin Intercalates of Oleochemicals derived from Rubber Seed ...
Journal: International Journal of Materials Science and Applications,, 2013
Author: Mgbemena, C.O., Mgbemena, C.E., Menon, A.R.R. Sukumar, R.
The geochemistry and depositional characteristics of Maastrichtan shales from southwest Nigeria.
Journal: Jour. of Min. Geology, , 2007
Author: Imeokparia, E.G., and Onyeobi, T.U.S
A Method for Stimulation Candidate Well Selection
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ovuema Augustina
Characterization of Kaolin intercalates of Oleochemicals derived from Rubber Seed (Hevea brasiliensi ...
Journal: Journal of King Saud University-Science, 2013
Author: Mgbemena, C.O., Ibekwe, N.O., Mohamed, A.P., Menon, A.R.R. Sukumar, R.
Modelling of Multiphase Flow Metering for Crude Oil Production Monitoring
Journal: International Journal of Current Engineering and Technology, 2015
Author: Ego C. Obukohwo, Okologume C. Wilfred, Dulu Appah and Marcus B. Umeleuma
ONLINE MONITORING OF SOFT SENSOR PERFORMANCE: A CASE STUDY OF CEMENT CLINKER QUALITY PARAMETERS SOFT ...
Journal: IJRET: International Journal of Research in Engineering and Technology, 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Design of a Photovoltaic Grid-Connected DC-AC Inverter
Journal: International Journal of Emerging trends in Engineering and Development, 2012
Author: (6) Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
The Design of a Linear Quadratic Optimal Regulator for Transient Heat flow in Continuous Casting of ...
Journal: International Journal of Current Research, 2016
Author: Obinabo E. C. Izelu C. O. Nwaoha T. C. and Ashiedu F. I.
Technology transfer and continuing engineering education
Journal: BeninJournal of Educational Studies, 1999
Author: IBHADODE, A.O.A
Manufacture of hand hacksaw blades form locally available mild stee
Journal: The Nigerian Engineer, 1991
Author: IBHADODE, A.O.A. and OJEAH, C.C
Punch and Counterpunch Design by the Die Expansion Method in Completely Closed Die Forging
Journal: MATERIALS SCIENCE FORUM, 2006
Author: Ibhadode, A. O. A.
A Method for Stimulation Candidate Well Selection
Journal: International Journal of Engineering and Technology, 2015
Author: undefined!
The Applied Geochemist and the Challenges of Georesource Evaluation for Sustainable development and ...
Journal: University of Benin, Benin City, 2015
Author: Imeokparia, E.G.
Effects of Sodium Hydroxide Concentration on the Physical Properties of Zeolite Produced from Local ...
Journal: European Journal of Scientific Research, 2011
Author: Oghenejoboh, K. M. and Ohimor, E. O.
Modeling and Optimization of Hard Turning Operations on 41Cr4 Alloy Steel using Response Surface Met ...
Journal: International Journal of Mechanical Engineering and Applications (IJMEA), 2016
Author: Izelu C. O., Ezeh S. C. and Ashiedu F. I.
Computational Modeling of Extracellular Matrix Protein Stamping on Hard Substrates for Biomedical Mi ...
Journal: Advances in Life Science and Technology, , 2014
Author: Aduloju, S.C., Nima, R., Mgbemena, C.O., Soboyejo, W.O.
Optimal Reliability and Cost of Power Distribution: A case of Power Holding Company of Nigeria.
Journal: International Journal of Engineering Science and Technology, , 2011
Author: Chinwuko, E.C., Nwuba, E.I.U., Mgbemena, C.O.
Predictive Model for Cement Clinker Quality Parameters
Journal: Journal of Materials Science and Chemical Engineering., 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Development of a New Flux for Aluminium Gas Welding
Journal: : Advanced Materials Research, 1994
Author: oseph I. Achebo, A.O. Akii Ibhadode
SYNTHESIS AND OPTICAL PROPERTIES OF SELF-ASSEMBLED COORDINATION POLYMER OF Zn(II) IONS WITH PHENYLMA ...
Journal: Ife Journal of Science, 2015
Author: Mbonu, J. I.
The Effect of Calcium Carbonate at Low Volume Fractions On the Mechanical Properties of Polypropylen ...
Journal: Journal of Engineering and Applied Sciences, , 2010
Author: Mgbemena, C.O., Ubani, N.O., Mgbemena, C.E.
A Contingent Claim Approach to Bank Valuation
Journal: Journal of Mathematical Finance, 2014
Author: Enahoro Alfred Owoloko, Nicholas Amienwan Omoregbe, Michael Akindele Okedoye
Investigating the Calibration Curves for a Two Component Cutting Tool Lathe Dynamometer Using Finite ...
Journal: International Journal of Engineering Research in Africa, 2010
Author: Osezua Obehi Ibhadode, Ishaya Musa Dagwa, Akii Okonigbon Akhaehomen Ibhadode
Experiences and Lessons Learnt From Embedding Sustainability in Engineering
Journal: World Congress on Engineering Education, 2015
Author: Otanocha, O.B., Tomkinson, B., Dobson, H., Cummings, C., Sanchez-Romaguera, V. and Tomkinson, R.
The effect of die container compounding on product accuracy in completely closed cavity die forging
Journal: Manufacturing Engineering Society International Conference, Calatayud, Spain, 2005
Author: IBHADODE, A.O.A. and AIBANGBEE, G.F
A combined algorithm approach to fuel consumption rate analysis and prediction of sea-worthy diesel ...
Journal: Journal of Engineering for The Maritime Environment, 2016
Author: Thaddeus C Nwaoha Garrick Ombor and Modestus O Okwu