PUBLICATIONS
Development of a Reflectance Photoplethysmogram Based Heart Rate Monitoring Device
Journal: International Journal of Medical Imaging, 2017
Author: Kingsley Okeoghene Enalume, Ayebatonye Marttyns Epemu
Utilization of cellulosic cassava waste for bio-ethanol production
Journal: JECE, 2015
Author: Elias E.Elemike, Ojiefoh C.Oseghale, Anthony C.Okoye
Modeling Hyperelastic Behavior of Natural Rubber/Organomodified Kaolin Composites Oleochemically Der ...
Journal: Journal of Scientific Research Reports, , 2014
Author: Ihueze,C.C Mgbemena,C.O.
Seismic Refraction Data Analyses: A Software for Low Velocity Layer Interpretation in the Niger Delt ...
Journal: Petroleum Technology Development Journal, 2017
Author: G. I. Alaminiokuma and T. Warmate
Problems and solutions involved in oil processing from kernel seeds.
Journal: The Pacific Journal of Science and Technology, 2012
Author: Samuel, O.D and Alabi, A.G.F
The Use of Geoinformatics in Site Selection for Suitable Landfill for Poultry Waste: A Case Study of ...
Journal: International Journal of Sciences, 2016
Author: Onosemuode C. and Abodurin W.A
On the Unsteady Free Convective Flow with Radiative Heat Transfer of Sisko Fluid
Journal: International Journal of Innovative Science, Engineering Technology, 2015
Author: Akindele Michael Okedoye
Derivation of the von Mises and Tresca yield loci in plane stress from the yield surface in three di ...
Journal: Journal of the Nigerian Institution of Production Engineers, 1993
Author: IBHADODE, A.O.A
Determination of Hydrocarbon Properties produced from different oil fields in Nigeria
Journal: journal of Engineering Science and Technology, 2010
Author: Otitigbe F and Akpoturi P.E
Small and Meduim Scale Enterprises- Catalyst for National Development in Nigeria
Journal: Journal of Scientific and Industrial Studies, 2007
Author: Akpoturi P.E
A Typified Greedy Dynamic Programming Model for the MetaTrader Platform
Journal: Journal of Advances in Mathematical and Computational Sciences, 2020
Author: Oyemade, D. A.
The Capability of using GIS in Managing Environmental Problem in the Niger Delta
Journal: Journal of Empirical Research., 2006
Author: Onosemuode, C and Okhae, S.E.
Compositional, Geotechnical and Industrial Characteristics of Some Clay Bodies in Southern Nigeria
Journal: Jour. of Geography and Geology, 2013
Author: Onyeobi T.U.S Imeokparia, E.G. Ilegieuno O.A and Egbuniwe I.G
Predicting Crude Oil Sales in NNPC Mega Station Awka, Anambra State, Nigeria.
Journal: Journal of Scientific and Engineering Research., 2016
Author: Umeozokwere, A.O., Oreko B.U., Offor I.C., Udoye, B.O.
Development and properties tests of aluminium grease for low velocity applications.
Journal: The Pacific Journal of Science and Technology, 2012
Author: Samuel, O.D, Isiaka, I.O and Omoleye, J.A.
The Effects of Agricultural Activities on the Environment in Keffi, Nasarawa State, Nigeria..
Journal: International Journal of Pure and Applied Sciences. , 2010
Author: Onosemuode, C Adesina Damilola and Okhae, S.E.
Facilitating Hazard Analysis of LNG Carrier Operations via Risk Matrix Approach
Journal: International Journal of Science and Technology, 2016
Author: Thaddeus C. Nwaoha Jasper Agbakwuru Modestus O. Okwu
Design, production and performance testing of two component cutting force dynamometer
Journal: Journal of the Nigerian Institution of Production Engineers, 1998
Author: DAGWA, I.M. and IBHADODE, A.O.A.
Advances in materials and systems technologies IV : selected, peer reviewed papers from the 4th Inte ...
Journal: Advanced materials research, 2013
Author: Ibhadode, A. O. Akii / Aluyor, E.O.
Punch and Counterpunch Design by the Die Expansion Method in Completely Closed Die Forging
Journal: MATERIALS SCIENCE FORUM, 2006
Author: Ibhadode, A. O. A.
Immunization Model for Ebola Virus in Rural Sierra-Leone
Journal: IEEE African Journal of Computing ICT, 2015
Author: Ojugo, A. A., Allenotor, D., Oyemade, D. A., Yoro, R. E., Anujeonye, C. N.
Estimation of pressdie system stiffness in mechanical press forging
Journal: Journal of the Nigerian Institution of Production Engineers, 1994
Author: IBHADODE, A.O.A. and DEAN, T.A
DETECTION OF CRACK LOCATION AND SIZE IN STRUCTURES USING HIGHER HARMONICS OF EXCITED FREQUENCY
Journal: Research Journal in Engineering and Applied Sciences, 2013
Author: Ezekiel Kingsley C., Okwu Modestus O., Johnson A. Fadeyi
Development of home made crucibles for traditional metal casting
Journal: Journal of the Nigerian Institution of Production Engineers, 1998
Author: IBHADODE, A.O.A.
Geoelectrical logging for well screening in prolific aquifers in Ubima, Ikwerre Local Government Are ...
Journal: African Journal of Environmental Science and Technology, 2017
Author: G. I. Alaminiokuma, T. Warmate and J. E. Emudianughe
Anthropometric survey of Nigeria adult working class
Journal: Nigerian Journal of Engineering Management, 2002
Author: IGBOANUGO, A.C., EGHAREVBA, F, and IBHADODE A.O.A
Diamond Bit Selection for Horizontal Wells
Journal: journal of Engineering Research and Sustainable Development, 2009
Author: Akpoturi Peters and Onwuachi- Iheagwara P .N
Estimation of Pressure Drop, Liquid Holdup and Flow Pattern in a Two Phase Vertical Flow
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Omon E., Dulu A. and Okotie S.
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: IJETAE , 2013
Author: C.O Izelu, Eze S.C, B.U. Oreko and Edward B.A.
Strategies to enhance Environmenatally Conscious Engineering safety Practices in Nigeria
Journal: journal of Engineering Studies, 2005
Author: Akpoturi P.E
Bioethanol production from corn stover using Saccharomyces cerevisiae
Journal: International Journal of Scientific Engineering Research, 2016
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora, Eke Akachukwu Ben and Nsidibe-Obong Ekpe Moses
Adjustment to Oil Saturation Estimate Due to Various Reservoir Drive Mechanisms
Journal: International Journal of Advanced Petroleum Engineering and Technology, 2014
Author: Okotie Sylvester and Ikporo Bibobra
Petroleum Potential of Paleogene-Neogene Age Sediments in Well TN-1, Western Niger Delta Basin, Nige ...
Journal: The Pacific Journal of Science and Technology, 2016
Author: Jerry Osokpor, Frank A. Lucas, Omawumi J. Osokpor, Brume Overare, G.I. Alaminiokuma, O.B. Ogbe, T.S. Daniya, and Og
Human exposure to endocrine-disrupting organochlorine and organophosphate pesticides in locally prod ...
Journal: International Journal of Environmental Health Research, 2024
Author: Tesi, G.O., Okpara, K.E., Tesi, J.N., Agbozu, I.E. and Techato, K.
Markov Chain Analysis for Inbreeding and their Genetic Effects.
Journal: International Journal of Numerical Mathematics., 2009
Author: Olaruwanju S.O, Onosemuode C. and Zubair M.A
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in industry, 2011
Author: C.U. ATUANYA, A.O.A. IBHADODE, A.C. IGBOANUGO
Hydrological Analysis of Onitsha North East Drainage Basin Using Geoinformatic Techniques.
Journal: World Applied Sciences Journal , 2010
Author: Onosemuode C. Adetimirin O. I and Aboderin S. O.
Design and Finite Element Analysis of Double - Acting, Double - Ends Hydraulic Cylinder for Industri ...
Journal: American Journal of Engineering Research (AJER), 2017
Author: ThankGod E. Boye, Adeyemi, I. Olabisi,Eyere E. Emagbetere
Directional Well Trajectory Design : The Theoretical Development of Azimuth Bends and turns in compl ...
Journal: Nigerian journal of technology (NIJOTECH), 2016
Author: P.O Okpozo, Akpoturi Peters, W.C Okologume
Predicting Reservoir Behavior using Mathematical Models 2 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: Australian Journal of Engineering Research. , 2015
Author: C.O Izelu, Eze S.C, Oreko B.U and Edward, B.A
Effect of Sand invasion on Oil Well Production: A Case study of Garon Field in the Niger Delta
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Bibobra Ikporo and Okotie Sylvester
The Influence of Process Variables on Load and Accuracy When Forging in a Completely Closed Cavity D ...
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Institution of Mechan, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
Evaluation of the Cost and Effect of Industrial Accidents
Journal: European Journal of Scientific Research, 2015
Author: Yusuf, T.A., Ismaila, S.O., Kuye, S.I. and Samuel, O.D.
Automobile disk brake pads made from palm kernel shell
Journal: Conference on New Products and Technologies for Small and Medium Enterprises,, 2001
Author: IBHADODE, A.O.A. and OLADEINDE, M.H
Design and Manufacture of a 30-ton Hydraulic Press
Journal: Mechanical Engineering Department, Federal University of Technology , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Solar Hydrogen Fuel Cell Technology, Principle, Applications and Market
Journal: Journal of Energy Technologies and Policy, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles, ONYAN AARON OKIEMUTE
Environmental Impact Of Mining On Agricultural Activities: A Case Study Of Bukuru, Jos.
Journal: International Journal Of Sustainable Development., 2010
Author: Onosemuode C. Akhimien F. O
Thermal stability of pulverized palm kernel shell (PKS) based friction lining material locally deve ...
Journal: ChemXpress , 2014
Author: Mgbemena, C.O., Mgbemena, C.E. Okwu, M.O.
Geochemistry and Environmetric Approaches to Estimating Pollution Impacts on soils around Okaba Coa ...
Journal: Brit. Jour of Applied Science and Technology, 2014
Author: Ameh, E.G. Imasuen, I.O. and Imeokparia, E.G