PUBLICATIONS
The Influence of Process Variables on Load and Accuracy When Forging in a Completely Closed Cavity D ...
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Institution of Mechan, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
An Evolvable Framework for Metamorphics
Journal: Computing, Information Systems, Development Informatics Allied Research Journal, 2016
Author: Allenotor, David
A Quality of Service (QoS) Model for Forex Brokers Platforms
Journal: International Journal of Innovative Science, Engineering Technology, 2022
Author: Oyemade, D. A., Allenotor, D.
Effect of Sand invasion on Oil Well Production: A Case study of Garon Field in the Niger Delta
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Bibobra Ikporo and Okotie Sylvester
The Use of Geoinformatics Techniques in Site Selection for solid Waste Dump A Case Study of Warri an ...
Journal: International Journal of Science and Research (IJSR), 2017
Author: Christopher Onosemuode and Omorogbe Osemwegie
INVESTMENT RETURNS WITH AN N-STEP GENERALIZED UTILITY FUNCTIONS
Journal: ICASTOR Journal of Mathematical Sciences, 2015
Author: EGHWERIDO. J. THOMAS, E. EFE-EYEFIA E. EKUMA-OKEREKE,
A new approach for the design of feedback control systems by the Bode Method
Journal: ournal of Electrical a nd Electronic Engineering ,, 1999
Author: IBHADODE, A.O.A.
Computerised Design Approach to a Sub-Press Mould for Composite Materials Manufacture
Journal: al: Advanced Materials Research, 1994
Author: Ishaya Musa Dagwa, A.O. Akii Ibhadode
The Effect of Calcium Carbonate at Low Volume Fractions On the Mechanical Properties of Polypropylen ...
Journal: Journal of Engineering and Applied Sciences, , 2010
Author: Mgbemena, C.O., Ubani, N.O., Mgbemena, C.E.
The use of SPOT Remotely Sensed Data in Monitoring Environmental Changes in Warri Metropolis
Journal: The Nigeria Journal of Research and Production, 2004
Author: Onosemuode Christopher
Thermal stability of pulverized palm kernel shell (PKS) based friction lining material locally deve ...
Journal: ChemXpress , 2014
Author: Mgbemena, C.O., Mgbemena, C.E. Okwu, M.O.
Optimization of coconut oil ethyl esters reaction variables and prediction model of its blends with ...
Journal: http://www.tandfonline.com/loi/tbfu20, 2016
Author: Olusegun David Samuel, Solomon Olanrewaju Giwa Abdulssalam El- Suleiman
Anaerobic Digester and Algal Pond Coupling using Agricultural Residues: Evaluating Productions, Pond ...
Journal: Chemistry Journal, 2015
Author: Raphael O. Idewele, Othuke D. Iduh, Evuensiri O. Ohimor, Samuel E. Ogbeide
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
Compositional, Geotechnical and Industrial Characteristics of Some Clay Bodies in Southern Nigeria
Journal: Jour. of Geography and Geology, 2013
Author: Onyeobi T.U.S Imeokparia, E.G. Ilegieuno O.A and Egbuniwe I.G
Optimizing the Output Current for a DC-DC Converter
Journal: Journal of Control Theory and Informatics, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles, ONYAN AARON OKIEMUTE
The Use of Geoinformatics in Landscape Development Control: A Case Study of Temidire Estate in Ogbom ...
Journal: Ekpoma Journal of Social Sciences. , 2015
Author: Onosemuode C. Akhimien and Ayankanmi A. J
Sorption of Mn(II) ions from wastewater using dried and blended water hyacinth (Eichhornia crassipes ...
Journal: Journal of the Turkish Chemical Society Section A: Chemistry,, 2024
Author: Tesi, G.O., Ejeromedoghene, O., Kpomah, B. and Ipeaiyeda, A.R.
Investigating the Calibration Curves for a Two Component Cutting Tool Lathe Dynamometer Using Finite ...
Journal: International Journal of Engineering Research in Africa, 2010
Author: Osezua Obehi Ibhadode, Ishaya Musa Dagwa, Akii Okonigbon Akhaehomen Ibhadode
On the realization of the Equilibrium State of FluidBorne Marine Vessels
Journal: International Journal of Science and Technology (IJST) , 2016
Author: Obinabo E. C., Nwaoha T. C. and Ashiedu F. I.
Cadastral Maps and Squatter (Slum) Settlement Development in Urban Growth.
Journal: Indian Journal of Multidisciplinary Research,, 2007
Author: Onosemuode, C and Gambo, I. D
Technical Properties of Some Plant Fibres Compared with Glass Fibre
Journal: International Journal of Engineering Research in Africa, 2010
Author: M. Sumaila, A.O. Akii Ibhadode
A Machine Learning Model for the Classification of Human Emotions
Journal: International Journal of Computer Sciences and Engineering , 2024
Author: D. A. Oyemade, D. F. Seregbe
Application of Box Behnken Design for the Optimization of Steam Turbine Efficiency
Journal: World Journal of Engineering Research and Technology (WJERT), 2017
Author: Eyere Emagbetere, Ashiedu Festus Ifeanyi, and Samuel, O. D.
Sequestering of Fe and Pb ions from Wastewater by Canarium schweinfurthii after carbonization and ch ...
Journal: Journal of Applied Science and Environmental Management, 2016
Author: Bassey Uwem, Oghenekohwiroro Edjere and Solomon Ebiye Otolo
Integrating Remote Sensing and GIS for Environmental Management
Journal: The Built Environment Journal, 2005
Author: Ufuah M.E, and Onosemuode C
A combined algorithm approach to fuel consumption rate analysis and prediction of sea-worthy diesel ...
Journal: Journal of Engineering for the Maritime Environment, 2016
Author: Thaddeus C Nwaoha Garrick Ombor and Modestus O Okwu
Determination of the optimum mix of sawdust and coal dust as a fue
Journal: Technical Transactions of the Nigerian Institution of Production Engineers,, 2000
Author: OSARENMWINDA, J.O. and IBHADODE, A.O.A.
Design of a PV-Connected DC-DC Converter
Journal: International Journal of Emerging trends in Engineering and Development, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: Australian Journal of Engineering Research. , 2015
Author: C.O Izelu, Eze S.C, Oreko B.U and Edward, B.A
DETECTION OF CRACK LOCATION AND SIZE IN STRUCTURES USING HIGHER HARMONICS OF EXCITED FREQUENCY
Journal: Research Journal in Engineering and Applied Sciences, 2013
Author: Ezekiel Kingsley C., Okwu Modestus O., Johnson A. Fadeyi
Introduction to Manufacturing Technology
Journal: Open Journal of Energy Efficiency, 2013
Author: Mala Abba-Aji, Vincent Ogwagwu, Bukar Umar Musa, Prof. A.O. Akii Ibhadode (Contributor)
A Nonlinear Approach to Queueing System Modelling,
Journal: International Journal of Engineering Science and Technology, 2010
Author: Mgbemena, C.E., Mgbemena, C.O., Chinwuko, C.E
Development of water hyacinth briquetting machine
Journal: International Journal of Scientific Research in Information Systems and Engineering (IJSRISE), 2016
Author: Modestus Okwu, Adeyemi I. Olabisi, ThankGod E. Boye, Ezurike O. Benjamin
SUITABILITY OF OKHUEN WOOD (BRACHISTEGIA NIGERICA) AND RECYCLED LOW DENSITY POLYETHYLENE FOR COMPOSI ...
Journal: The Nigerian Academy of Science, 2014
Author: C.U. Atuanya1, and A.O.A. Ibhadode FAS2,
Virtual Remote Control System Using Embedded Systems with Internet of Things
Journal: FUPRE Journal of Scientific and Industrial Research (FJSIR), 2024
Author: Nwachukwu, K., Oyemade, D. A.
Microbial community structure of an oil polluted site in Effurun, Nigeria
Journal: International Research Journal of Public and Environmental Health, 2017
Author: Tega L. Ataikiru1,Beatrice F. Okorhi-Damisa1 and Jemeelah I. Akpaiboh1
Evaluation of the Cost and Effect of Industrial Accidents
Journal: European Journal of Scientific Research, 2015
Author: Yusuf, T.A., Ismaila, S.O., Kuye, S.I. and Samuel, O.D.
Towards a Software Cost Reduction Model
Journal: Benin Journal of Advances in Computer Science, 2018
Author: Oyemade, D. A, Onibere, E. A.
Protoliths and Petrogenesis of Precambrian gneisses from the Igbeti Area Southwest Nigeria
Journal: Chemie der Erde, 1991
Author: Imeokparia, E.G., and Emofurieta, W.O
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
Finite Element Analysis and Design Validation of High Pressure Gate Valve for a Typical Nigerian Oil ...
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: ThankGod E. Boye, Thaddeus C. Nwaoha, Adeyemi I. Olabisi
EVALUATION OF PHTHALATES CONTENTSAND THEIR HEALTH EFFECTS IN CONSUMED SACHET WATER BRANDS IN DELTA S ...
Journal: INTERNATIONAL JOURNAL OF BIOLOGICAL, BIOMOLECULAR, AGRICULTURAL, FOOD AND BIOTECHNOLOGICAL ENGINEERING, 2016
Author: EDJERE OGHENEKOHWIRORO, ASIBOR IRABOR GODWIN, UWEM BASSEY
Predicting Reservoir Behavior using Mathematical Models 3 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
A Study of Land use Change in Warri, Delta State.
Journal: The Built Environment Journal, 2006
Author: Onosemuode, C. Ufuah, M.E. and Ifatimehin, O.O.
Procedure for calculating shear rate in the reservoir in Niger Delta
Journal: Journal or Engineering and Energy Research, 2014
Author: Akpoturi Peters
Towards an Enhanced Product Line Engineering Process Model
Journal: Benin Journal of Advances in Computer Science, 2019
Author: Oyemade, D. A, Onibere, E. A.
International Journal of Engineering Research in Africa
Journal: International Journal of Engineering Research in Africa, 2010
Author: Editor-in-Chief: Dr. A.O.A. Ibhadode JERA Managing Director: Dr. Stanislav Kolesnichenko
Corner filling characteristics in precision forging
Journal: International Journal of Machine Tools and Manufacture , 1988
Author: A.O.A. Ibhadode,T.A.Dean
Preliminary Study on Antimicrobial Activity of Friendly Bacteria Isolated from Dairy Products
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2015
Author: Okorhi-Damisa, F. B. and Ataikiru, T. L.