PUBLICATIONS
Seismic Refraction Data Analyses: A Software for Low Velocity Layer Interpretation in the Niger Delt ...
Journal: Petroleum Technology Development Journal, 2017
Author: G. I. Alaminiokuma and T. Warmate
Punch and Counterpunch Design by the Die Expansion Method in Completely Closed Die Forging
Journal: MATERIALS SCIENCE FORUM, 2006
Author: Ibhadode, A. O. A.
A Quality of Service (QoS) Model for Forex Brokers Platforms
Journal: International Journal of Innovative Science, Engineering Technology, 2022
Author: Oyemade, D. A., Allenotor, D.
An assessment of rural libraries and information services for rural development: A study of Delta St ...
Journal: The Electronic Library, 2017
Author: Saturday U. Omeluzor, Gloria O. Oyovwe-Tinuoye, Uche Emeka-Ukwu
The Applied Geochemist and the Challenges of Georesource Evaluation for Sustainable development and ...
Journal: University of Benin, Benin City, 2015
Author: Imeokparia, E.G.
On the Issue of Dualism in Cartography
Journal: Anyigba Journal of Arts and Humanities, 2004
Author: Ufuah M.E, Onosemuode C
Effects of breadfruit seed hull ash on the microstructures and properties of AlSiFe alloy/breadfruit ...
Journal: Elsevier Science Direct- Results in Physics, 2012
Author: lC.U.Atuanya A.O.A.Ibhadode.M.Dagwa
ENERGY- CONTENT AND SPECTRAL ANALYSES OF SHOTS FOR OPTIMUM SEISMOGRAM GENERATION IN THE NIGER DELTA
Journal: International Journal of Geology, Earth Environmental Sciences, 2014
Author: Alaminiokuma G.I. and Emudianughe J.E.
Static Analysis of a P195/55 R16 85H Radial Tire Developed from Natural rubber/Tea Seed Oil (Camelli ...
Journal: American Journal of Mechanical Engineering and Automation,, 2014
Author: Ihueze, C.C Mgbemena, C.O.
Geochemistry and Environmetric Approaches to Estimating Pollution Impacts on soils around Okaba Coa ...
Journal: Brit. Jour of Applied Science and Technology, 2014
Author: Ameh, E.G. Imasuen, I.O. and Imeokparia, E.G
Design and Finite Element Analysis of Double - Acting, Double - Ends Hydraulic Cylinder for Industri ...
Journal: American Journal of Engineering Research (AJER), 2017
Author: ThankGod E. Boye, Adeyemi, I. Olabisi,Eyere E. Emagbetere
Evaluation of heavy metal pollutant from soils at Municipal Waste Dump in parts of Lagos metropolis ...
Journal: Nig. Jour. Applied Science, 2009
Author: Imeokparia, E.G. Onyeobi, T.U.S and Nwanchi Des. A.E.
Assessment of the Problems Militating Against Tourism Development in Delta State, Nigeria.
Journal: Confluence Journal of Environmental Studies, 2006
Author: Onosemuode, C and Usideme, P.O (2006)
Manufacture of hand hacksaw blades form locally available mild stee
Journal: The Nigerian Engineer, 1991
Author: IBHADODE, A.O.A. and OJEAH, C.C
Effects of Self-regulated learning and Metacognitive learning cycle on the academic achievement of ...
Journal: Open Journal of Advanced Engineering Techniques, , 2013
Author: Inomiesa, E.A., Achufusi, N.N. Mgbemena, C.O.
Performance Evaluation of Multicast Protocols
Journal: SAU Science-Tech Journal, 2017
Author: Akpojaro, J., Omogbhemhe, M., Oyemade, D. A.
Implementation of Koha Integrated Library Management Software (ILMS): The Babcock University Experie ...
Journal: Canadian Social Science, 2012
Author: Saturday U. Omeluzor, Olugbenga Adara, Madukoma Ezinwayi, Itunu A. Bamidele and Felicia Oby Umahi
Determination of Hydrocarbon Properties produced from different oil fields in Nigeria
Journal: journal of Engineering Science and Technology, 2010
Author: Otitigbe F and Akpoturi P.E
Corner filling characteristics in precision forging
Journal: International Journal of Machine Tools and Manufacture , 1988
Author: A.O.A. Ibhadode,T.A.Dean
A Price-Based Grid Resources Pricing Approach for Non-Storable Real Assets
Journal: Journal of Advances in Mathematical Computational Science, 2022
Author: Allenotor, D.Oyemade, D. A.
Deep Learning Social Filtering Model for Event Recommendation Services
Journal: American Journal of Artificial Intelligence, 2024
Author: D. A. Oyemade, L.C. Aworonye
Pareto Principle and Hazard Model as Tools for Apporpriate Scheduled Maintenance in a Manufacturing ...
Journal: African Journal of Science, Technology, Innovation and Development, 2016
Author: Johnson A. Fadeyi, Modestus O. Okwu, Chinedum O. Mgbemena, Kingsley C. Ezekiel
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: IJETAE , 2013
Author: C.O Izelu, Eze S.C, B.U. Oreko and Edward B.A.
Advances in materials and systems technologies IV : selected, peer reviewed papers from the 4th Inte ...
Journal: Advanced materials research, 2013
Author: Ibhadode, A. O. Akii / Aluyor, E.O.
Effect of Sand invasion on Oil Well Production: A Case study of Garon Field in the Niger Delta
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Bibobra Ikporo and Okotie Sylvester
Spatio-Dynamics of Surface Water Characteristics in Delta State.
Journal: International Journal of Advanced Remote Sensing and GIS, , 2015
Author: Onosemuode Christopher
The Design of a Linear Quadratic Optimal Regulator for Transient Heat flow in Continuous Casting of ...
Journal: International Journal of Current Research, 2016
Author: Obinabo E. C. Izelu C. O. Nwaoha T. C. and Ashiedu F. I.
Water table regime in parts of Obio-Akpor local Government area of Rivers State, Nigeria
Journal: International Research Journal of Earth Sciences, 2017
Author: G. I. Alaminiokuma and W. N. Ofuyah
Assessment of the Impacts of Industrialization in Esan Land, Edo State, Nigeria
Journal: Continental Journal of Environmental Design and Management , 2012
Author: Akhimien F.O, Onosemuode C and Ibhadode C
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
The Implication of the River Niger Dredging on the Morphometric Analysis of Warri River Drainage Ba ...
Journal: Nasara Scientifique., 2005
Author: Onosemuode, Christopher
Justification for Oil Well Stimulation
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Okotie Sylvester, Ubani C. E., Ikporo Bibobra
Development of a Production Mould for Casting Single - Cylinder Engine Pistons
Journal: ADVANCED MATERIALS RESEARCH -ZUG, 2007
Author: Zhengwuvi, L. B. / Ibhadode, A. O.A.
Development of a Computer-Aided Application for Analyzing ECG Signals and Detection of Cardiac Arrhy ...
Journal: International Journal of Applied Information Systems , 2015
Author: Akinlolu A. Ponnle and Oludare Y. Ogundepo
Design and Development of an Integrated Small-Scale Oil Palm Fruit Processing Mill
Journal: Advanced Materials Research, 1994
Author: C.O. Ilechie, A.O. Akii Ibhadode, B.O. Abikoye
Deformation of solid cylindrical forgings in a completely closed cavity die
Journal: Nigerian Society of Engineers Technical Transactions, 1993
Author: IBHADODE, A.O.A. and DEAN, T.A
The shere igneous complex central Nigeria. Geochemical constraints on the origin of peralkaline and ...
Journal: Geologie en Mujinbow, 1990
Author: Imeokparia, E.G., and Badejoko, T.A. 1990
Geochemical and mineralogical Transformation in Red Tropical Soil profiles from Southwestern Nigeria
Journal: African Jour. of Science and Technology., 1995
Author: Onyeobi, T.U.S. and Imeokparia, E.G
Antimicrobial activity of chemical bioactive compounds from the chloroform extract of the aerial par ...
Journal: International Journal of Biological and Chemical Sciences, 2016
Author: Christiana Ene OGWUCHE and Oghenekohwiroro EDJERE
Numerical Investigation of Thermo-Mechanical Behaviour of Ball Grid Array Solder Joint at High Tempe ...
Journal: ADVANCED MATERIALS RESEARCH -ZUG-, 2012
Author: Amalu, E.H. / Ekere, N.N. / Bhatti, R.S. / Mallik, S. / Takyi, G. / Ibhadode, A.O.A.
Critical Stress Analysis of a Formula One Racing Car Wishbone Suspension System
Journal: International Journal of Engineering and Manufacturing Science (IJEMS), 2016
Author: ThankGod Enatimi Boye and Chinedum Ogonna Mgbemena
THE SECURITY PROVIDER... Social Responsibility and Customer Satisfaction
Journal: Security, 2020
Author: Onakpoma Oboroghenerukohwo
The Impact of 3D Printing Technology to the Nigerian Manufacturing GDP
Journal: Modern Mechanical Engineering, 2018
Author: A. Balogun, V. , B. Otanocha, O. and O. Ibhadode, A.
SUITABILITY OF OKHUEN WOOD (BRACHISTEGIA NIGERICA) AND RECYCLED LOW DENSITY POLYETHYLENE FOR COMPOSI ...
Journal: The Nigerian Academy of Science, 2014
Author: C.U. Atuanya1, and A.O.A. Ibhadode FAS2,
Green Synthesis of Ag/Ag2O Nanoparticles Using Aqueous Leaf Extract of Eupatorium odoratum and Its A ...
Journal: Molecules, 2017
Author: Elias E. Elemike, Damian C. Onwudiwe, Anthony C. Ekennia, Christopher U. Sonde and Richard C. Ehiri
Predicting Reservoir Behavior using Mathematical Models 2 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
FAITH Software Life Cycle Model for Forex Expert Advisors
Journal: Journal of Advances in Mathematical and Computational Sciences, 2021
Author: Oyemade, D. A., Allenotor, D.
EXPERIMENTAL DETERMINATION OF THE EFFECT OF NOTCH SHAPE ON WEIR FLOW CHARACTERISTICS USING CONSTANT ...
Journal: Asian Journal of Current Research (AJOCR), 2017
Author: ADEYEMI I. OLABISI, ABAM TAMUNOPEKERE JOSHUA AND OREKO U. BENJAMIN
Design and Finite Element Analysis of Double - Acting, Double - Ends Hydraulic Cylinder for Industri ...
Journal: American Journal of Engineering Research (AJER), 2017
Author: 1. ThankGod E. Boye, Adeyemi, I. Olabisi, Eyere E. Emagbetere
Improved Correlation for Predicting Stock Tank Gas-Oil Ratio in Niger Delta
Journal: Onepetrol Journal, 2016
Author: Hilary Okeke. and Okotie Sylvester