PUBLICATIONS
Application of re-refined used lubricating oil as base oil for the formulation of oil based drilling ...
Journal: Journal of Petroleum Technology and Alternative Fuels, 2013
Author: Oghenejoboh K. M., Ohimor E. O. and Olayebi O.
Design of DC-link Voltage Controller and Grid Current Controller in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
Effect of Brain Drain (Human Capital Flight) of Librarians on Service Delivery in Some Selected Nige ...
Journal: SAGE Open, 2014
Author: Clara Chinyere Okoro, Saturday U. Omeluzor and Itunu A. Bamidele
Sequestering of Fe and Pb ions from Wastewater by Canarium schweinfurthii after carbonization and ch ...
Journal: Journal of Applied Science and Environmental Management, 2016
Author: Bassey Uwem, Oghenekohwiroro Edjere and Solomon Ebiye Otolo
Methods, effect and challenges of Library instruction in academic libraries.
Journal: Library Philosophy and Practice., 2017
Author: Saturday U. Omeluzor, Alarape Asimi Akibu, Sunday Ikhimeakhu Dika and Clement C. Ukangwa
Sorption of Mn(II) ions from wastewater using dried and blended water hyacinth (Eichhornia crassipes ...
Journal: Journal of the Turkish Chemical Society Section A: Chemistry,, 2024
Author: Tesi, G.O., Ejeromedoghene, O., Kpomah, B. and Ipeaiyeda, A.R.
Justification for Oil Well Stimulation
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Okotie Sylvester, Ubani C. E., Ikporo Bibobra
A Validation Method of Computational Fluid Dynamics (CFD) Simulation against Experimental Data of Tr ...
Journal: American Journal of Engineering Research (AJER) , 2017
Author: Boye, Thankgod, Nwaoha, T. C., Samuel, O. D and Ashiedu, F. I.
Design and Manufacture of Automobile Disk Brake Pad Test Rig
Journal: Nigerian Journal of Engineering Research and Development, 2005
Author: Dagwa, Ishaya - Ibhadode, A.O.Akii
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in Industry, Vol 33, Iss 1, Pp 11-17 (2011), 2011
Author: A. C. Igboanugo / A. O. A. Ibhadode / C. U. Atuanya
Technical Properties of Some Plant Fibres Compared with Glass Fibre
Journal: International Journal of Engineering Research in Africa, 2010
Author: M. Sumaila, A.O. Akii Ibhadode
The effect of die container compounding on product accuracy in completely closed cavity die forging
Journal: Manufacturing Engineering Society International Conference, Calatayud, Spain, 2005
Author: IBHADODE, A.O.A. and AIBANGBEE, G.F
Productivity Pattern of Warri Refining and Petrochemicals Limited A principal Component Analysis App ...
Journal: International Journal of Development Research, 2016
Author: Ashiedu F. I. and Izelu C. O.
Optimisation of Alkaline Ethanolysis of Biodiesel Yield from Nigerian Coconut Oil using One Variable ...
Journal: JENRM, 2014
Author: Samuel O.D., Okwu M. O., Oreko U.O., Amosun S. T.
Environmental Pollution from Port Harcourt Refinery - A System Approach
Journal: journal of Engineering and Environmental Studies, 2006
Author: Akpoturi P.E
A Deterministic Approach to Measurement of Noise Operations on 41Cr4 Alloy Steel using Response Surf ...
Journal: International Journal of Mechanical Engineering and Applications (IJMEA) , 2016
Author: Obinabo E. C. Nwaoha T. C., Ashiedu F. I., and Izelu C. O.
Man Power Prediction for Nigeria Liquefied Natural Gas Industry
Journal: Nigeria journal of Engineering Management, 2006
Author: Akpoturi P.E
Assessment of the Problems Militating Against Tourism Development in Delta State, Nigeria.
Journal: Confluence Journal of Environmental Studies, 2006
Author: Onosemuode, C and Usideme, P.O (2006)
Small and Meduim Scale Enterprises- Catalyst for National Development in Nigeria
Journal: Journal of Scientific and Industrial Studies, 2007
Author: Akpoturi P.E
Optimizing the Output Current for a DC-DC Converter
Journal: Journal of Control Theory and Informatics, International Institute for Science, Technology and Education, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles and Onyan Aaron Okiemute
Development and Evaluation of Maize Husks (Asbestos-free) Based Brake Pad
Journal: Industrial Engineering Letters, 2015
Author: Nuhu A. Ademoh and Adeyemi, I. Olabisi.
Experimental Study on a Line-Axis Concentrating Solar Energy Collector for Water Heating
Journal: Industrial Engineering, 2017
Author: Frederick Ikpakwu, Anthony Okoronkwo, Modestus Okwu, Emmanuel Anyanwu
Evaluation of the Cost and Effect of Industrial Accidents
Journal: European Journal of Scientific Research, 2015
Author: Yusuf, T.A., Ismaila, S.O., Kuye, S.I. and Samuel, O.D.
Technical Properties of some plant fibres compared with glass fibre
Journal: International Journal of Engineering research in Affrica, 2014
Author: M. Sumaila, Ao. Ibhadode
COMPARATIVE EVALUATION OF ARTIFICIAL LIFT METHODS ON A NIGER DELTA FIELD
Journal: Academic Research International , 2016
Author: Okologume Chinedu Wilfred, Ofesi Samuel F
Problems of Environmental Pollution and Control in the Nigeria Petroleum Industry
Journal: journal of research in Engineering and Environmental Studies, 2006
Author: Akpoturi P.E and Ndukwe J.O
Design and Development of a 10 Million Liters Capacity Petroleum Product Storage Tank.
Journal: The International Journal Of Engineering And Science (IJES)., 2016
Author: D.R. Enarevba, C.O. Izelu, B.U. Oreko and E. Emagbetere
IMPLEMENTATION OF A MICROCONTROLLER BASED PURE SINE WAVE INVERTER
Journal: International Journal of Scientific Engineering and Applied Science (IJSEAS), 2017
Author: GODSWILL OFUALAGBA AND CHARLES KEVWE IGBINOBA
Modeling Work Task and the Bending Capabilities of Subjects
Journal: Journal of the Nigerian Association of Mathematical Physics , 2012
Author: Igboanugo, A. C. Ashiedu, F. and Onifade M. K.
Determination of Optimum Manufacturing Conditions for Asbestos-free Brake Pad using Taguchi Method
Journal: Nigerian Journal of Engineering Research and Development, 2006
Author: Dagwa, Ishaya - Ibhadode, A.O.Akii
An Investigation of Predictability of Traders Profitability Using Deep Learning
Journal: American Journal of Computer Science and Technology, 2024
Author: David Ademola Oyemade, Eseoghene Ben-Iwhiwhu
Artificial neural network model for cost optimization in a dual-source multi-destination outbound sy ...
Journal: PRODUCTION MANUFACTURING, 2018
Author: Modestus O. Okwu, Benjamin Ufuoma Oreko, Stanley Okiy, Austin C. Uzorh and Onyewuchi Oguoma
Effects of Sodium Hydroxide Concentration on the Physical Properties of Zeolite Produced from Local ...
Journal: European Journal of Scientific Research, 2011
Author: Oghenejoboh, K. M. and Ohimor, E. O.
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: INTERNATIONAL JOURNAL OF MACHINE TOOLS AND MANUFACTURE, 2004
Author: Amiolemhen, P. E. / Ibhadode, A. O.
Road Traffic Accident in Nasarawa State: Case study of Road Safety, Keffi Unit Command
Journal: The Nasara Journal of Humanities., 2005
Author: Onosemuode Christopher
Office Noise Pollution in industrial and commercial premises in Nigeria
Journal: Nigerian journal of Industrial and Systems Studies (NJISS), 2005
Author: Akpoturi P E and J Ndukwe
Using factor Cluster analysis and enrichment methods to evaluate impact of cement production on str ...
Journal: Advances in Applied Science Research, 2011
Author: Ameh, E.G., Kolawole, M.S. and Imeokparia, E.G.
Towards a Software Cost Reduction Model
Journal: Benin Journal of Advances in Computer Science, 2018
Author: Oyemade, D. A, Onibere, E. A.
Optimizing the Output Current for a DC-DC Converter
Journal: Journal of Control Theory and Informatics, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles, ONYAN AARON OKIEMUTE
A Simple Procedure for Calculating shut -in Tubing Pressure (SITP)
Journal: Journal of Engineering and Applied Scientific Research, 2014
Author: Akpoturi Peters
Hydrological Analysis of Onitsha North East Drainage Basin Using Geoinformatic Techniques.
Journal: World Applied Sciences Journal , 2010
Author: Onosemuode C. Adetimirin O. I and Aboderin S. O.
Development of Asbestos-Free Friction Lining Material from Palm Kernel Shell
Journal: Journal of the Brazilian Society of Mechanical Sciences, 2008
Author: A. O. A. Ibhadode, I. M. Dagwa
Impact of Brewery Factory Effluent on the physicochemical Characterizes of Ikpoba River in Edo State ...
Journal: Resource and Environment, 2016
Author: Oghenekohwiroro Edjere, Albert C. Ibezute, Sandra U. Ibezute
The Design of a Manual Table-Top Grinder,
Journal: Scholars Journal of Engineering and Technology,, 2014
Author: Abdulmalik, I.O., Michael, A., Akonyi, N.S., Mgbemena, C.O., Aaron-Orsu, C.J Ambali, A.O.
Application of Box Behnken Design for the Optimization of Steam Turbine Efficiency
Journal: World Journal of Engineering Research and Technology (WJERT), 2017
Author: Eyere Emagbetere, Ashiedu Festus Ifeanyi, and Samuel, O. D.
Microcontroller Based Automatic Control for Water Pumping Machine with Level Indicators using Ultras ...
Journal: Nigeria Journal of Technology (NIJOTECH), 2016
Author: J. E. Okhaifoh, C. K. Igbinoba and K. O. Eriaganoma
Barium Sulphate Scaling Prevention
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Obot I., Okotie S.and Dulu A
Software Testing Framework for the Financial Market
Journal: American Journal of Software Engineering and Applications, 2024
Author: D. A. Oyemade
The Role of Solid Mineral Mapping for Sustainable Development in Nasarawa State
Journal: M.E Ufuah and R.O. Olomo [ed.] Cartography and GIS for Sustainable Solid Mineral Development in Nigeria. A Publication, 2005
Author: Onosemuode Christopher
Compositional, Geotechnical and Industrial Characteristics of Some Clay Bodies in Southern Nigeria
Journal: Jour. of Geography and Geology, 2013
Author: Onyeobi T.U.S Imeokparia, E.G. Ilegieuno O.A and Egbuniwe I.G