PUBLICATIONS
Diamond Bit Selection for Horizontal Wells
Journal: journal of Engineering Research and Sustainable Development, 2009
Author: Akpoturi Peters and Onwuachi- Iheagwara P .N
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in industry, 2011
Author: C.U. ATUANYA, A.O.A. IBHADODE, A.C. IGBOANUGO
A Factorial Study of Accessibility Requirements of Paraplegics in a Built-up Environment
Journal: Journal of Innovative Research in Engineering and Science (JOIRES), 2011
Author: Ashiedu, F. And Igboanugo A. C.
Simulation and experimental verification of completely closed cavity die forging on a mechanical pre ...
Journal: Proc. Institution of Mechanical Engineers, 1989
Author: IBHADODE, A.O.A. and DEAN, T.A
Determination of the Contact Angles of Kaolin Intercalates of Oleochemicals derived from Rubber Seed ...
Journal: International Journal of Materials Science and Applications,, 2013
Author: Mgbemena, C.O., Mgbemena, C.E., Menon, A.R.R. Sukumar, R.
EXPERIMENTAL DETERMINATION OF THE EFFECT OF NOTCH SHAPE ON WEIR FLOW CHARACTERISTICS USING CONSTANT ...
Journal: Asian Journal of Current Research (AJOCR), 2017
Author: ADEYEMI I. OLABISI, ABAM TAMUNOPEKERE JOSHUA AND OREKO U. BENJAMIN
EVALUATION OF PHTHALATES CONTENTSAND THEIR HEALTH EFFECTS IN CONSUMED SACHET WATER BRANDS IN DELTA S ...
Journal: INTERNATIONAL JOURNAL OF BIOLOGICAL, BIOMOLECULAR, AGRICULTURAL, FOOD AND BIOTECHNOLOGICAL ENGINEERING, 2016
Author: EDJERE OGHENEKOHWIRORO, ASIBOR IRABOR GODWIN, UWEM BASSEY
Predicting Diffusion Dynamics Of The Coronavirus In Nigeria Through Ties-Strength Threshold On A Cas ...
Journal: Technology Reports of Kansai University, 2020
Author: . Ojugo, A. A., Oyemade, D. A.
Tourist Sites in Delta State, Nigeria
Journal: Achieving Millennium Development Goals Through Mapping, David A. Musa and W.D.C Wokoma (ed), 2007
Author: Onosemuode, C .
Determining Temperature Extreme in Warri City, Niger-Delta Region, Nigeria
Journal: 9(3): 160-166, 2019 Article no.IJECC.2019.013 ISSN: 2581-8627, 2019
Author: Y. S. Onifade1 and V. B. Olaseni1
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: Australian Journal of Engineering Research. , 2015
Author: C.O Izelu, Eze S.C, Oreko B.U and Edward, B.A
Empirical Method to Predict the Performance of Human Powered Mono Hull Boats
Journal: International Journal of Engineering and Technologies, 2016
Author: Pereowei G. Ombor, Agbakwuru Jasper, Modestus O. Okwu,
The Capability of using GIS in Managing Environmental Problem in the Niger Delta
Journal: Journal of Empirical Research., 2006
Author: Onosemuode, C and Okhae, S.E.
Hyperelastic modelling and limit stress prediction of a P195/55 R16 85H Radial tire developed from N ...
Journal: American Journal of Material Sciences and Applications., 2014
Author: Ihueze, C.C, Mgbemena, C.O.
Development of water hyacinth briquetting machine
Journal: International Journal of Scientific Research in Information Systems and Engineering (IJSRISE), 2016
Author: Modestus Okwu, Adeyemi I. Olabisi, ThankGod E. Boye, Ezurike O. Benjamin
Protoliths and Petrogenesis of Precambrian gneisses from the Igbeti Area Southwest Nigeria
Journal: Chemie der Erde, 1991
Author: Imeokparia, E.G., and Emofurieta, W.O
Design of composite dies by the die expansion method
Journal: Technical Transactions of the Nigerian Society of Engineers, 1999
Author: IBHADODE, A.O.A
Assessment of Household Energy Utilized for Cooking in Ikeja, Lagos State, Nigeria.
Journal: Nigeria Journal of Technology, NIJOTECH., 2016
Author: E. Emagbetere, J. Odia and Oreko, B.U.
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in Industry, Vol 33, Iss 1, Pp 11-17 (2011), 2011
Author: A. C. Igboanugo / A. O. A. Ibhadode / C. U. Atuanya
Production of Biodiesel from Nigeria Restaurant Waste Cooking Oil using Blender.
Journal: International Journal of Renewable Energy Research, 2013
Author: Samuel, O.D., Waheed, M.A., Bolaji B.O. and O.U. Dairo
ANALYSIS OF COCONUT ETHYL ESTER (BIODIESEL) AND FOSSIL DIESEL BLENDING: PROPERTIES AND CORROSION CHA ...
Journal: Nigerian Journal of Technology, 2016
Author: Samuel, O. D., Ashiedu, F. I., Oreko, B. U
Artificial Neural Network (ANN) and Greedy Heuristic (GH) Approach to Transshipment Model in a Bottl ...
Journal: Operations Research and Information Engineering, 2018
Author: Modestus O. Okwu, Ikuobase Emovon
The Applied Geochemist and the Challenges of Georesource Evaluation for Sustainable development and ...
Journal: University of Benin, Benin City, 2015
Author: Imeokparia, E.G.
Characterization and Creep Behaviour of Polypropylene/Calcium Carbonate Nanocomposites.
Journal: Journal of Applied Sciences Research, , 2010
Author: Mgbemena, C.O., Mgbemena, C.E., Ubani, N.O.
Shot Configuration Suitable for Optimizing Foldage and Offset around Areas with Non-Seismic Objects
Journal: AMERICAN JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH, 2013
Author: G. I. Alaminiokuma and D. O. Ogagarue
Advances in materials and systems technologies III
Journal: Advanced materials research, 2012
Author: Prof. A.O. Akii Ibhadode
Reservoir Management Practice, Key to Optimum recovery
Journal: Multi- Disciplinary Engineering journal of Research Development, 2008
Author: Akpoturi P.E and Otitigbe F
A Nonlinear Approach to Queueing System Modelling,
Journal: International Journal of Engineering Science and Technology, 2010
Author: Mgbemena, C.E., Mgbemena, C.O., Chinwuko, C.E
Artificial neural network model for cost optimization in a dual-source multi-destination outbound sy ...
Journal: PRODUCTION MANUFACTURING, 2018
Author: Modestus O. Okwu, Benjamin Ufuoma Oreko, Stanley Okiy, Austin C. Uzorh and Onyewuchi Oguoma
An Optimized Input Genetic Algorithm Model for the Financial Market
Journal: International Journal of Innovative Science, Engineering Technology, 2021
Author: David Ademola Oyemade, Arnold Adimabua Ojugo
Application of Markov Theoretical Model in Predicting Risk Severity and Exposure Levels of Workers i ...
Journal: International Journal of Mechanical Engineering and Applications, 2016
Author: Okwu Modestus Okechukwu Thaddeus C. Nwaoha Ombor Garrick
Design and Development of a Paraplegic Centricity Mobility Aid
Journal: Journal of Emerging Trend in Engineering and Applied Science (JETEAS) , 2012
Author: Ashiedu Festus and Igboanugo A. C.
The effect of die expansion in precision forging
Journal: Journal of the Nigerian Institution of Production Engineers, , 1994
Author: IBHADODE, A.O.A
A Hybridized Analytic Model for the Formation of Student Groups
Journal: International Journal of Innovative Science, Engineering Technology, 2021
Author: David Enebeli, David Ademola Oyemade
Dynamics of Land use Change: A Case Study of Lafia, Nasarawa State, Nigeria
Journal: Geoinformatics Geostatistics: An Overview, 2017
Author: Onosemuode Christopher and Galadima Daniel Habila
A comparative study of artificial neural network (ANN) and adaptive neuro-fuzzy inference system (AN ...
Journal: International Journal of Engineering Business Management, 2018
Author: Modestus Okwu, Olufemi Adetunji
The Role of Solid Mineral Mapping for Sustainable Development in Nasarawa State
Journal: M.E Ufuah and R.O. Olomo [ed.] Cartography and GIS for Sustainable Solid Mineral Development in Nigeria. A Publication, 2005
Author: Onosemuode Christopher
Advances in materials and systems technologies IV : selected, peer reviewed papers from the 4th Inte ...
Journal: Advanced materials research, 2013
Author: Ibhadode, A. O. Akii / Aluyor, E.O.
Modelling prevention and reduction methods of ship propeller cavitation under uncertainty, Ships and ...
Journal: Ships and Offshore Structures, 2017
Author: 1. Thaddeus C. Nwaoha, Sidum Adumene and ThankGod E. Boye
Developments in the Measurement and Estimation Methods for Cement Clinker Quality Parameters
Journal: International Journal of Engineering Research Technology (IJERT), 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Towards a Unified University Information System: Bridging the Gap of Data Interoperability
Journal: American Journal of Software Engineering, 2014
Author: Orobor Anderson Ise
Manufacture of metal-arc welding electrodes from locally available materials
Journal: Journal of the Nigerian Institution of Production Engineer, 1993
Author: OKOH, I.G. and IBHADODE, A.O.A
Hydrogeological Studies for Groundwater resource and its vulnerability to contamination in Owo, Sout ...
Journal: International Journal of Science and Research (IJSR), 2015
Author: Falowo, O.O, and Imeokparia, E.G
A Study of Land use Change in Warri, Delta State.
Journal: The Built Environment Journal, 2006
Author: Onosemuode, C. Ufuah, M.E. and Ifatimehin, O.O.
Influence of Thermal cycling on the fatigue resistance of Medium Carbon Steel.
Journal: Open Journal of Advanced Engineering Techniques,, 2013
Author: Orumwense, F.F.O., Agbadua, S.A., Mgbemena, C.O., Ubani, N.O.
Carbon Nanotube: The Building Blocks of Nanotechnology Development.
Journal: J.Nanotech. Prog. Int. (JONP) , 2016
Author: Boye, E.T., Achadu, J.O, Oreko, B.U and Samuel, O.D
The Influence of the use of ICT facilities on the academic achievement of Secondary School Physics.
Journal: International Journal of Advances in Science and Technology, , 2011
Author: Achufusi, N.N., Achufusi, U.N., Mgbemena, C.O., Mgbemena, C.E..
Investigation of plume dynamics during picosecond laser ablation of H13 steel using high-speed digit ...
Journal: Applied Physics A, 2017
Author: Krste Pangovski, Omonigho B. Otanocha, Shan Zhong, Martin Sparkes, Zhu Liu, William ONeill, Lin Li
Adsorption and desorption performances of Eichhornia crassipes (water hyacinth) roots and leaves pow ...
Journal: Ovidius University Annals of Chemistry, 2025
Author: Tesi, G.O., Ejeromedoghene, O., Alli, Y.A., Okunoja, H.B. and Ipeaiyeda, A.R.
Physico-Chemical and Bacteriological Assessment of Abattoir Effluents and its effect on Agbarho Rive ...
Journal: Nigerian Journal of Applied Science, 2017
Author: Asibor, I., Edjere, O., and Ofejiro, P.