PUBLICATIONS
Modelling and optimization of surface roughness and machining induced vibration 41Cr4 alloy structu ...
Journal: The International Journal Of Engineering And Science (IJES), 2016
Author: Izelu, C.O., Eze, S.C. and Samuel, Olusegun David
Contextualization of Entrepreneurial Education in Production Engineering Discipline
Journal: Journal of Emerging Trends in Education and Policy Studies (JETERAPS) , 2011
Author: Igboanugo Anthony C. and Ashiedu Festus
Predicting Diffusion Dynamics Of The Coronavirus In Nigeria Through Ties-Strength Threshold On A Cas ...
Journal: Technology Reports of Kansai University, 2020
Author: . Ojugo, A. A., Oyemade, D. A.
The Design of a Linear Quadratic Optimal Regulator for Transient Heat flow in Continuous Casting of ...
Journal: International Journal of Current Research, 2016
Author: Obinabo E. C. Izelu C. O. Nwaoha T. C. and Ashiedu F. I.
The Economics in the Ergonomics of Poultry Farming: Marfes Farm Approach
Journal: Fupre Journal of Scientific and Industrial Research (FJSIR) , 2017
Author: Ashiedu, F. I, and Popoola, E. O.
MHD Stagnation Point Flow over a Permeable Vertical Plate with a Convective Surface Boundary Conditi ...
Journal: International Journal of Innovative Science, Engineering Technology,, 2015
Author: Akindele Michael Okedoye
Punch and Counterpunch Design by the Die Expansion Method in Completely Closed Die Forging
Journal: MATERIALS SCIENCE FORUM, 2006
Author: Ibhadode, A. O. A.
Preliminary Design for Solid Waste Incineration for Power Generation in Benin Metropolis, Nigeria
Journal: ADVANCED MATERIALS RESEARCH -ZUG-, 2013
Author: Igbinomwanhia, D.I. / Ibhadode, O.O. / Akhator, P.E.
The use of SPOT Remotely Sensed Data in Monitoring Environmental Changes in Warri Metropolis
Journal: The Nigeria Journal of Research and Production, 2004
Author: Onosemuode Christopher
DETECTION OF CRACK LOCATION AND SIZE IN STRUCTURES USING HIGHER HARMONICS OF EXCITED FREQUENCY
Journal: Research Journal in Engineering and Applied Sciences, 2013
Author: Ezekiel Kingsley C., Okwu Modestus O., Johnson A. Fadeyi
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in Industry, Vol 33, Iss 1, Pp 11-17 (2011), 2011
Author: A. C. Igboanugo / A. O. A. Ibhadode / C. U. Atuanya
On a Method for Die Container Design in Completely Closed Die Forging
Journal: TRANSACTIONS- AMERICAN SOCIETY OF MECHANICAL ENGINEERS JOURNAL OF MECHANICAL DESIGN, 1997
Author: Ibhadode, A. O. A.
Technology transfer and continuing engineering education
Journal: BeninJournal of Educational Studies, 1999
Author: IBHADODE, A.O.A
Geochemical and mineralogical Transformation in Red Tropical Soil profiles from Southwestern Nigeria
Journal: African Jour. of Science and Technology., 1995
Author: Onyeobi, T.U.S. and Imeokparia, E.G
KINETIC MODELING FOR REMOVAL OF Pb, Cd, Ni, and Cr ions FROM PETROCHEMICAL EFFLUENT USING TERMITE SO ...
Journal: International Journal of Sciences, 2016
Author: I. E. Agbozu and U. Bassey
Critical Stress Analysis of a Formula One Racing Car Wishbone Suspension System
Journal: International Journal of Engineering and Manufacturing Science (IJEMS), 2016
Author: ThankGod Enatimi Boye and Chinedum Ogonna Mgbemena
Application of Box Behnken Design for the Optimization of Steam Turbine Efficiency
Journal: World Journal of Engineering Research and Technology (WJERT), 2017
Author: Eyere Emagbetere, Ashiedu Festus Ifeanyi, and Samuel, O. D.
Communication: An Instrument for Wealth Creation
Journal: African Journal Of Arts And Cultural Studies , 2009
Author: Otanocha, B. Omonigho and Nkwor, Chimezie Agbafor
Assessment of Household Energy Utilized for Cooking in Ikeja, Lagos State, Nigeria.
Journal: Nigeria Journal of Technology, NIJOTECH., 2016
Author: E. Emagbetere, J. Odia and Oreko, B.U.
Economic Evaluation of Electrical Submersible Pump (ESP) and Gas Lift Well For Production Optimizati ...
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Ezekiel Chuks., Okotie Sylvester.and Dulu Appah
An analysis of coconut ethyl ester (biodiesel) and fossil diesel blending: properties and corrosion ...
Journal: Nigerian Journal of Technology (NIJOTECH), 2016
Author: Samuel Olusegun .David, Ashiedu, F.I. and Orek, B.U
Modelling of Multiphase Flow Metering for Crude Oil Production Monitoring
Journal: International Journal of Current Engineering and Technology, 2015
Author: Ego C. Obukohwo, Okologume C. Wilfred, Dulu Appah and Marcus B. Umeleuma
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: International Journal of Machine Tools and Manufacture, 2004
Author: P.E. Amiolemhen, A.O.A. Ibhadode
Hydrocarbon Biodegradation and Antibiotic Sensitivity of Microorganisms isolated from an oil pollute ...
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2020
Author: Ataikiru T.L, Okorhi F.B and Onyegbunwa A.E
Performance of seismic detectors: a case study of the sensitivity of SM-4 geophones used in Nigeria
Journal: International Research Journal of Earth Sciences, 2017
Author: G.I. Alaminiokuma and W.N. Ofuyah
Assessment of total petroleum hydrocarbons contents in water and soil samples from power station dis ...
Journal: Journal of Applied Science, 2016
Author: Edjere, O., Asibor, G. and Bassey, U.
DISTRIBUTION OF PHTHALATE ESTERS IN UNDERGROUND WATER FROM POWER TRANSMISSION SITES IN WARRI METROPO ...
Journal: Journal of applied science and environmental management, 2016
Author: EDJERE, O ASIBOR, IG BASSEY, U
Responsive Production Systems and Roles that Robots can Play
Journal: Advanced Materials Research, 2009
Author: R.H. Weston , Edited by : Prof. A.O. Akii Ibhadode, A.I. Igbafe and B.U. Anyata
Finite Element Analysis and Design Validation of High Pressure Gate Valve for a Typical Nigerian Oi ...
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: ThankGod E. Boye, Thaddeus C. Nwaoha and Adeyemi I. Olabisi
The Effects of Agricultural Activities on the Environment in Keffi, Nasarawa State, Nigeria..
Journal: International Journal of Pure and Applied Sciences. , 2010
Author: Onosemuode, C Adesina Damilola and Okhae, S.E.
Development of an Electric induction furnace for heat treatment of ferrous and non-ferrous alloys,
Journal: American Journal of Engineering Research,, 2015
Author: Anaidhuno, U.P Mgbemena, C.O
Carbon Nanotube: The Building Blocks of Nanotechnology Development.
Journal: J.Nanotech. Prog. Int. (JONP) , 2016
Author: Boye, E.T., Achadu, J.O, Oreko, B.U and Samuel, O.D
Investigating the Calibration Curves for a Two Component Cutting Tool Lathe Dynamometer Using Finite ...
Journal: International Journal of Engineering Research in Africa, 2010
Author: Osezua Obehi Ibhadode, Ishaya Musa Dagwa, Akii Okonigbon Akhaehomen Ibhadode
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
Predicting Reservoir Behavior using Mathematical Models 2 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
Numerical Investigation of Thermo-Mechanical Behaviour of Ball Grid Array Solder Joint at High Tempe ...
Journal: ADVANCED MATERIALS RESEARCH -ZUG-, 2012
Author: Amalu, E.H. / Ekere, N.N. / Bhatti, R.S. / Mallik, S. / Takyi, G. / Ibhadode, A.O.A.
Artificial neural network model for cost optimization in a dual-source multi-destination outbound sy ...
Journal: PRODUCTION MANUFACTURING, 2018
Author: Modestus O. Okwu, Benjamin Ufuoma Oreko, Stanley Okiy, Austin C. Uzorh and Onyewuchi Oguoma
The Impact of 3D Printing Technology to the Nigerian Manufacturing GDP
Journal: Modern Mechanical Engineering, 2018
Author: A. Balogun, V. , B. Otanocha, O. and O. Ibhadode, A.
Reservoir Management Practice, Key to Optimum recovery
Journal: Multi- Disciplinary Engineering journal of Research Development, 2008
Author: Akpoturi P.E and Otitigbe F
Creep function Parameter Analysis for Optimum Design with Calcium Carbonate Carbonate Nanofiller Pol ...
Journal: Journal of Minerals and Materials Characterization and Engineering , 2011
Author: Ihueze, C.C., Mgbemena, C.O., Nnuka, E.E.
Effect of Brain Drain (Human Capital Flight) of Librarians on Service Delivery in Some Selected Nige ...
Journal: SAGE Open, 2014
Author: Clara Chinyere Okoro, Saturday U. Omeluzor and Itunu A. Bamidele
Immunization Model for Ebola Virus in Rural Sierra-Leone
Journal: IEEE African Journal of Computing ICT, 2015
Author: Ojugo, A. A., Allenotor, D., Oyemade, D. A., Yoro, R. E., Anujeonye, C. N.
The Implication of the River Niger Dredging on the Morphometric Analysis of Warri River Drainage Ba ...
Journal: Nasara Scientifique., 2005
Author: Onosemuode, Christopher
Tool wear of some hacksaw blades
Journal: Journal of the Nigerian Institution of Production Engineers, 1994
Author: IBHADODE, A.O.A
A Basic Approach To Designing Embedded Systems Using a Simple Calculator and C Programming Language
Journal: Nigerian Journal of Technology, 2014
Author: F. Tanshi, N. Bello
Remedation of Crude Oil-Polluted Surface Water Using Aqua-gel Bentonite, Periwinkle Shell Chitosin E ...
Journal: Journal of Ecology and Environment, 2016
Author: Okafor, W.C., Menkiti, M., Okafor, I., Ohimor, E., Onocha, O., Oreko, B., and Sheidu, S.
Assessment of Water Suitability for Irrigation in Keffi, Nasarawa State, Nigeria
Journal: International Journal of Sciences, 2016
Author: Onosemuode C, Ataikiru T. L, Osayomwanbor E. O
Problems and solutions involved in oil processing from kernel seeds.
Journal: The Pacific Journal of Science and Technology, 2012
Author: Samuel, O.D and Alabi, A.G.F
2-Imino-(3,4-dimethoxybenzyl) ethanesulfonic acid Schiff base anchored silver nanocomplex mediated b ...
Journal: JART, 2016
Author: Elias E. Elemike, Enock O. Dare, Inyang D. Samuel,Jude C. Onwuka
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: Australian Journal of Engineering Research. , 2015
Author: C.O Izelu, Eze S.C, Oreko B.U and Edward, B.A