PUBLICATIONS
2D static failure prediction for critical stresses of an automobile tire sidewall using MATLAB PDETo ...
Journal: IOSR-Journal of Mechanical Civil Engineering,, 2014
Author: Ihueze, C.C., Mgbemena, C.O., Menon, A.R.R.
Experimental Study of Induced Vibration and Work Surface Roughness in the Turning of 41Cr4 Alloy S ...
Journal: IJIRSET , 2013
Author: Eze S.C., Izelu, C.O., Oreko B.U., Edward B.A
Investigations into the Applications of Ergonomics Principles in the Design of School Furniture in N ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences, 2013
Author: Ashiedu F. I. and Amiebenomon, S. O.
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: INTERNATIONAL JOURNAL OF MACHINE TOOLS AND MANUFACTURE, 2004
Author: Amiolemhen, P. E. / Ibhadode, A. O.
Application of Electrical Resistivity Method in the Assessment of Ground Water Potentials for Sustat ...
Journal: Annals of Environmental Studies, 2016
Author: Onosemuode C, Ataikiru L. T, and Oghama E.O
Design of composite dies by the die expansion method
Journal: Technical Transactions of the Nigerian Society of Engineers, 1999
Author: IBHADODE, A.O.A
ONLINE MONITORING OF SOFT SENSOR PERFORMANCE: A CASE STUDY OF CEMENT CLINKER QUALITY PARAMETERS SOFT ...
Journal: IJRET: International Journal of Research in Engineering and Technology, 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Effect of Sand invasion on Oil Well Production: A Case study of Garon Field in the Niger Delta
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Bibobra Ikporo and Okotie Sylvester
NUMERICAL MODELLING OF CURRENT ON WAVE DRIFT LOAD OF A SHIP SHAPED OFFSHORE STRUCTURES (CASE STUDY - ...
Journal: IJRDO-Journal of Mechanical And Civil Engineering, 2017
Author: Abam, Tamunopekere Joshua, Agbakwuru, Jasper Ahamefulal, Adeyemi, I. Olabisi
Derivation of the von Mises and Tresca yield loci in plane stress from the yield surface in three di ...
Journal: Journal of the Nigerian Institution of Production Engineers, 1993
Author: IBHADODE, A.O.A
A Deterministic Approach to Measurement of Noise Operations on 41Cr4 Alloy Steel using Response Surf ...
Journal: International Journal of Mechanical Engineering and Applications (IJMEA) , 2016
Author: Obinabo E. C. Nwaoha T. C., Ashiedu F. I., and Izelu C. O.
Assessment of the Impacts of Industrialization in Esan Land, Edo State, Nigeria
Journal: Continental Journal of Environmental Design and Management , 2012
Author: Akhimien F.O, Onosemuode C and Ibhadode C
Analytical Solution of MHD Free Convective Heat and Mass Transfer Flow in a Porous Medium.
Journal: The Pacific Journal of Science and Technology, 2013
Author: Akindele Michael Okedoye Ph.D.
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
A Novel Framework for Student Result Computation as a Cloud Computing Service
Journal: American Journal of Systems and Software, 2015
Author: Orobor Anderson Ise
The Application of Artificial Neural Network in Prediction of the Performance of Spark Ignition Engi ...
Journal: International Journal of Engineering and Technologies, 2017
Author: O.C. Nwufo, Modestus O. Okwu, C. F. Nwaiwu, J.O. Igbokwe, E. E. Anyanwu
Effects of breadfruit seed hull ash on the microstructures and properties of AlSiFe alloy/breadfruit ...
Journal: Elsevier Science Direct- Results in Physics, 2012
Author: lC.U.Atuanya A.O.A.Ibhadode.M.Dagwa
Assessment of total petroleum hydrocarbons contents in water and soil samples from power station dis ...
Journal: Journal of Applied Science, 2016
Author: Edjere, O., Asibor, G. and Bassey, U.
Performance of seismic detectors: a case study of the sensitivity of SM-4 geophones used in Nigeria
Journal: International Research Journal of Earth Sciences, 2017
Author: G.I. Alaminiokuma and W.N. Ofuyah
Development of water hyacinth briquetting machine
Journal: International Journal of Scientific Research in Information Systems and Engineering (IJSRISE), 2016
Author: Modestus Okwu, Adeyemi I. Olabisi, ThankGod E. Boye, Ezurike O. Benjamin
The Economics in the Ergonomics of Poultry Farming: Marfes Farm Approach
Journal: Fupre Journal of Scientific and Industrial Research (FJSIR) , 2017
Author: Ashiedu, F. I, and Popoola, E. O.
Development of a Computer-Aided Application for Analyzing ECG Signals and Detection of Cardiac Arrhy ...
Journal: International Journal of Applied Information Systems , 2015
Author: Akinlolu A. Ponnle and Oludare Y. Ogundepo
Environmental Impact Of Mining On Agricultural Activities: A Case Study Of Bukuru, Jos.
Journal: International Journal Of Sustainable Development., 2010
Author: Onosemuode C. Akhimien F. O
Advances in Materials and Systems Technologies III
Journal: Advanced materials research, 2012
Author: Prof. A.O. Akii Ibhadode
Estimation of Pressure Drop, Liquid Holdup and Flow Pattern in a Two Phase Vertical Flow
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Omon E., Dulu A. and Okotie S.
SUITABILITY OF OKHUEN WOOD (BRACHISTEGIA NIGERICA) AND RECYCLED LOW DENSITY POLYETHYLENE FOR COMPOSI ...
Journal: The Nigerian Academy of Science, 2014
Author: C.U. Atuanya1, and A.O.A. Ibhadode FAS2,
Predicting Reservoir Behavior using Mathematical Models 2 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
Computerised Design Approach to a Sub-Press Mould for Composite Materials Manufacture
Journal: al: Advanced Materials Research, 1994
Author: Ishaya Musa Dagwa, A.O. Akii Ibhadode
The effect of die expansion in precision forging
Journal: Journal of the Nigerian Institution of Production Engineers, , 1994
Author: IBHADODE, A.O.A
Application of re-refined used lubricating oil as base oil for the formulation of oil based drilling ...
Journal: Journal of Petroleum Technology and Alternative Fuels, 2013
Author: Oghenejoboh K. M., Ohimor E. O. and Olayebi O.
Corner filling characteristics in precision forging
Journal: International Journal of Machine Tools and Manufacture , 1988
Author: A.O.A. Ibhadode,T.A.Dean
Environmental Pollution from Port Harcourt Refinery - A System Approach
Journal: journal of Engineering and Environmental Studies, 2006
Author: Akpoturi P.E
Material Requirement Planning of MISO Production Process using Transfer Function: A Case Study of So ...
Journal: Journal of the Nigeria Association of Mathematical Physics. , 2016
Author: S. Okiy, B.U. Oreko and C.C. Nwobi-Okoye
Development of a Computer-Aided Application for Analyzing ECG Signals and Detection of Cardiac Arrh ...
Journal: International Journal of Applied Information Systems , 2015
Author: Oludare Y Ogundepo and Akinlolu A Ponnle
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in industry, 2011
Author: C.U. ATUANYA, A.O.A. IBHADODE, A.C. IGBOANUGO
Adjustment to Oil Saturation Estimate Due to Various Reservoir Drive Mechanisms
Journal: International Journal of Advanced Petroleum Engineering and Technology, 2014
Author: Okotie Sylvester and Ikporo Bibobra
Phase-based neuron training using evolutionary algorithms.
Journal: Fundamentals of Electrical Engineering (ISFEE), 2014 International Symposium, 2014
Author: Sorin Laureniu Stnescu Omonigho Benedict Otanocha
Engine Spare Parts Production through Copy Manufacture and Substitution Approach
Journal: Advanced Materials Research, 1994
Author: E.H. Amalu, A.O. Akii Ibhadode
Analysis of Coconut Ethyl Esther (Biodiesel) and Fossil Diesel Blending Properties and Corrosion Cha ...
Journal: Nigerian Journal of Technology (NIJOTECH), 2016
Author: Samuel O. D., Ashiedu F. I. and Oreko B. U.
Design and Manufacture of a 30-ton Hydraulic Press
Journal: Mechanical Engineering Department, Federal University of Technology , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Utilization of Nigerian precious Resource in the Niger Delta Region for the benefit of the Ecosystem ...
Journal: International Journal of Engineering and Technology (IJET), 2014
Author: Okotie Sylvester and Ikporo Bibobra
Optimizing the Output Current for a DC-DC Converter
Journal: Journal of Control Theory and Informatics, International Institute for Science, Technology and Education, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles and Onyan Aaron Okiemute
Remedation of Crude Oil-Polluted Surface Water Using Aqua-gel Bentonite, Periwinkle Shell Chitosin E ...
Journal: Journal of Ecology and Environment, 2016
Author: Okafor, W.C., Menkiti, M., Okafor, I., Ohimor, E., Onocha, O., Oreko, B., and Sheidu, S.
Development of useful products from agro-waste and polythene bags
Journal: Conference on New Products and Technologies for Small and Medium Enterprises,, 2001
Author: IBHADODE, A.O.A
Optimal Reliability and Cost of Power Distribution: A case of Power Holding Company of Nigeria.
Journal: International Journal of Engineering Science and Technology, , 2011
Author: Chinwuko, E.C., Nwuba, E.I.U., Mgbemena, C.O.
Stochastic Analysis of the Effect of Asset Prices to a Single Economic Investor
Journal: Bulletin of Mathematical Sciences and Applications, 2016
Author: E. Ekuma-Okereke, J. T. Eghwerido, E. Efe-Eyefia, S. Zelibe
Pareto Principle and Hazard Model as Tools for Apporpriate Scheduled Maintenance in a Manufacturing ...
Journal: African Journal of Science, Technology, Innovation and Development, 2016
Author: Johnson A. Fadeyi, Modestus O. Okwu, Chinedum O. Mgbemena, Kingsley C. Ezekiel
Evaluation of a Systematic Approach to Matrix Acidizing on an Oil Producing Well
Journal: International Journal of Research in Engineering and Technology, 2015
Author: Okologume C. Wilfred, Marcus Bourdelon Umeleuma
A Stochastic Model for Face Detection
Journal: Advances in Multidisciplinary Research Journal, 2016
Author: Ojugo, A. A., Allenotor, D., Oyemade, D. A.
Seasonal Biodiversity Assessment of Benthic Macroinvertebrate of Asejire Reservoir, Southwest Nigeri ...
Journal: Journal of Sustainable Development, 2015
Author: Asibor, I. G.