PUBLICATIONS
Corner filling characteristics in precision forging
Journal: International Journal of Machine Tools and Manufacture , 1988
Author: A.O.A. Ibhadode,T.A.Dean
Second Law Analysis of Mass Transfer Effect on Unsteady MHD Flow Past an Accelerated Vertical Porous ...
Journal: International Journal of Pure and Applied Sciences and Technology, 2014
Author: Okedoye Akindele Michael
Design of a PV-Connected DC-DC Converter
Journal: International Journal of Emerging trends in Engineering and Development, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Performance Evaluation of Multicast Protocols
Journal: SAU Science-Tech Journal, 2017
Author: Akpojaro, J., Omogbhemhe, M., Oyemade, D. A.
Advances in materials and systems technologies III
Journal: Advanced materials research, 2012
Author: Prof. A.O. Akii Ibhadode
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: IJETAE , 2013
Author: C.O Izelu, Eze S.C, B.U. Oreko and Edward B.A.
Application of re-refined used lubricating oil as base oil for the formulation of oil based drilling ...
Journal: Journal of Petroleum Technology and Alternative Fuels, 2013
Author: Oghenejoboh K. M., Ohimor E. O. and Olayebi O.
Determination of the Contact Angles of Kaolin Intercalates of Oleochemicals derived from Rubber Seed ...
Journal: International Journal of Materials Science and Applications,, 2013
Author: Mgbemena, C.O., Mgbemena, C.E., Menon, A.R.R. Sukumar, R.
Towards a Software Cost Reduction Model
Journal: Benin Journal of Advances in Computer Science, 2018
Author: Oyemade, D. A, Onibere, E. A.
A Validation Method of Computational Fluid Dynamics (CFD) Simulation against Experimental Data of Tr ...
Journal: American Journal of Engineering Research (AJER), 2017
Author: ThankGod E. Boye, Thaddeus C. Nwaoha Samuel D. Olusegun, Festus I. Ashiedu
A Machine Learning Model for the Classification of Human Emotions
Journal: International Journal of Computer Sciences and Engineering , 2024
Author: D. A. Oyemade, D. F. Seregbe
The Assessment of Baseline Ecological Data for Environmental Management: A Case study of the Coasta ...
Journal: The Nigeria Academic Forum, 2004
Author: Onosemuode Christopher
A Three Tier Learning Model for Universities in Nigeria
Journal: Journal of Technologies in Society, 2016
Author: Oyemade, D. A., Akpojaro, J., Ojugo, A., Ureigho, R. J., Imouokhome, F. A., Omoregbee, E. U.
A Factorial Study of Accessibility Requirements of Paraplegics in a Built-up Environment
Journal: Journal of Innovative Research in Engineering and Science (JOIRES), 2011
Author: Ashiedu, F. And Igboanugo A. C.
Compositional, Geotechnical and Industrial Characteristics of Some Clay Bodies in Southern Nigeria
Journal: Jour. of Geography and Geology, 2013
Author: Onyeobi T.U.S Imeokparia, E.G. Ilegieuno O.A and Egbuniwe I.G
Assessment of Water Suitability for Irrigation in Keffi, Nasarawa State, Nigeria
Journal: International Journal of Sciences, 2016
Author: Onosemuode, C., Ataikiru, T. L. and Oghama, O. E.
Problems and solutions involved in oil processing from kernel seeds.
Journal: The Pacific Journal of Science and Technology, 2012
Author: Samuel, O.D and Alabi, A.G.F
Impact of PCBs from Transmission Oil Discharges: A Case Study of Power Distribution Installations in ...
Journal: Nigerian Journal of Applied Science, 2016
Author: Edjere, O., Asibor, G. and Otolo, S.
Modified Screw Jack for Lifting Operation in Industrial Setting
Journal: International Journal of Engineering and Technologies, 2017
Author: Benjamin Ezurike, Modestus O. Okwu
Science and Technology - A Vehicle for Sustainable Development in Nigeria
Journal: journal of Engineering Management, 2002
Author: Akpoturi .P.E
Technical Properties of Some Plant Fibres Compared with Glass Fibre
Journal: International Journal of Engineering Research in Africa, 2010
Author: M. Sumaila, A.O. Akii Ibhadode
A Comparative Study of Regression Analysis and Artificial Neural Network Methods for Medium-Term Loa ...
Journal: Indian Journal of Science and Technology, 2017
Author: Isaac A. Samuel Adetiba Emmanuel Ishioma A. Odigwe and Firstlady C. Felly-Njoku
Engineering Design Criteria for Wheelchair: AHP approach
Journal: Journal of Sustainable Technology (JoST), 2015
Author: Nwaoha T. C. and Ashiedu F. I.
Seasonal Biodiversity Assessment of Benthic Macroinvertebrate of Asejire Reservoir, Southwest Nigeri ...
Journal: Journal of Sustainable Development, 2015
Author: Asibor, I. G.
Stochastic Analysis of the Effect of Asset Prices to a Single Economic Investor
Journal: Bulletin of Mathematical Sciences and Applications, 2016
Author: E. Ekuma-Okereke, J. T. Eghwerido, E. Efe-Eyefia, S. Zelibe
Total Hydrocarbon Content in water and sediment samples from coastal region of Nigeria
Journal: journal ofEngineering Science and Technology, 2010
Author: Otitigbe F and Akpoturi P.E
A combined algorithm approach to fuel consumption rate analysis and prediction of sea-worthy diesel ...
Journal: Journal of Engineering for The Maritime Environment, 2016
Author: Thaddeus C Nwaoha Garrick Ombor and Modestus O Okwu
APPLICATION OF DESIGN EXPERT IN THE ANALYSIS OF RESPONSE TRANSFORMATION OF PROCESSES A CASE STUDY O ...
Journal: International Journal of Advanced Research (IJAR), 2017
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora and Eke Akachukwu Ben.
Assessing the adoption and use of integrated library systems (ILS) for library service provision in ...
Journal: Library Review, 2016
Author: Saturday U. Omeluzor and Gloria O. Oyovwe-Tinuoye
Crystal structure of tetraaquabis(3,5-diamino- 4H-1,2,4-triazol-1-ium)cobalt(II) bis[bis(pyridine-2, ...
Journal: Acta Cryst, 2015
Author: Atim Johnson, Justina Mbonu, Zahid Hussain, Wan-Sin Lohe and Hoong-Kun Funf,
Determining Temperature Extreme in Warri City, Niger-Delta Region, Nigeria
Journal: 9(3): 160-166, 2019 Article no.IJECC.2019.013 ISSN: 2581-8627, 2019
Author: Y. S. Onifade1 and V. B. Olaseni1
Geostatistical Analysis of well Velocity Data for Enhanced Depth Imaging in the Niger Delta
Journal: Journal of Applied Geology and Geophysics, 2017
Author: G. I. Alaminiokuma and W. N. Ofuyah
Lateral Rock Property Prediction by Post Stack Acoustic Impedance Inversion: A Case Study from Offsh ...
Journal: International Journal of Sciences: Basic and Applied Research, 2016
Author: Difference Odeyovwi Ogagarue, Godswill Igoni Alaminiokuma
Design and Construction of a Mobile Phone Based Home and Office Appliances Remote Switching System
Journal: American Journal of Embedded Systems and Applications, 2017
Author: Kingsley Okeoghene Enalume, Emmanuel Okhueleigbe
Manufacture of metal-arc welding electrodes from locally available materials
Journal: Journal of the Nigerian Institution of Production Engineer, 1993
Author: OKOH, I.G. and IBHADODE, A.O.A
Performance Evaluation of an Indigenous Rotary Power Weeder
Journal: Energy and Environmental Engineering Journal, 2012
Author: Olaoye, J. O. and Samuel, O. D. and Adekanye, T. A
Modelling prevention and reduction methods of ship propeller cavitation under uncertainty, Ships and ...
Journal: Ships and Offshore Structures, 2017
Author: 1. Thaddeus C. Nwaoha, Sidum Adumene and ThankGod E. Boye
Gas Lift Technique a Tool to Production Optimization
Journal: International Journal of Oil, Gas and Coal Engineering, 2015
Author: Okotie Sylvester 1 , Ikporo Bibobra 2 , Ovuema Augustina 1
Modelling of Multiphase Flow Metering for Crude Oil Production Monitoring
Journal: International Journal of Current Engineering and Technology, 2015
Author: Ego C. Obukohwo, Okologume C. Wilfred, Dulu Appah and Marcus B. Umeleuma
A Mixed Model Analysis of a Fertilizer Experiment on Oil Palm in Nigeria
Journal: Agricultural Sciences, 2016
Author: Edwin A. Iguodala, Eghwerido Joseph Thomas, Austin Edokpayi, Obilade Titilola
OPTIMIZATION OF INVESTMENT RETURNS WITH N-STEP UTILITY FUNCTIONS
Journal: Journal of Nigerian Mathematical Society, 2014
Author: J. T. EGHWERIDO1 AND T. O. OBILADE
A Nonlinear Approach to Queueing System Modelling,
Journal: International Journal of Engineering Science and Technology, 2010
Author: Mgbemena, C.E., Mgbemena, C.O., Chinwuko, C.E
Preliminary study on antimicrobial activity of friendly bacteria isolated from dairy products: Prel ...
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2005
Author: OKORHI F. BEATRICE AND ATAIKIRU TEGA
Material Requirement Planning of MISO Production Process using Transfer Function: A Case Study of So ...
Journal: Journal of the Nigeria Association of Mathematical Physics. , 2016
Author: S. Okiy, B.U. Oreko and C.C. Nwobi-Okoye
Communication: An Instrument for Wealth Creation
Journal: African Journal Of Arts And Cultural Studies , 2009
Author: Otanocha, B. Omonigho and Nkwor, Chimezie Agbafor
Effect of Turning Parameters on Metal Removal and Tool Wear Rates of AISI 1018 Low Carbon Steel.
Journal: Nigerian Journal of Technology,, 2016
Author: Mgbemena, C.O., Mgbemena, C.E., Ashiedu, F.I. Etebenumeh, G. O.
Evaluation of the Levels of Phthalate Ester Plasticizers in Surface Water of Ethiope River System, N ...
Journal: Journal of Applied Sciences and Environmental Management, 2016
Author: Edjere, O., Asibor, I.G. and Otolo, S.E.
PERFORMANCE OF AN AUTOMOTIVE BUMPER FROM LALLOH 2 (Corchorustriden L.) PLANT FIBRE REINFORCED EPOXY ...
Journal: Nigerian Journal of Technology, 2016
Author: M. Sumaila and A. O. A. Ibhadode
Solar Hydrogen Fuel Cell Technology, Principle, Applications and Market
Journal: Journal of Energy Technologies and Policy, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles, ONYAN AARON OKIEMUTE
An Investigation of Predictability of Traders Profitability Using Deep Learning
Journal: American Journal of Computer Science and Technology, 2024
Author: David Ademola Oyemade, Eseoghene Ben-Iwhiwhu