PUBLICATIONS
Design of a Photovoltaic Grid-Connected DC-AC Inverter
Journal: International Journal of Emerging trends in Engineering and Development, 2012
Author: (6) Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Effects of breadfruit seed hull ash on the microstructures and properties of AlSiFe alloy/breadfruit ...
Journal: Elsevier Science Direct- Results in Physics, 2012
Author: lC.U.Atuanya A.O.A.Ibhadode.M.Dagwa
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
A Study of Land use Change in Warri, Delta State.
Journal: The Built Environment Journal, 2006
Author: Onosemuode, C. Ufuah, M.E. and Ifatimehin, O.O.
Design of a PV-Connected DC-DC Converter
Journal: International Journal of Emerging Trends in Engineering and Development, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetro journal , 2015
Author: Ovuema Augustina and Okotie Sylvester
Development of a Computer-Aided Application for Analyzing ECG Signals and Detection of Cardiac Arrh ...
Journal: International Journal of Applied Information Systems , 2015
Author: Oludare Y Ogundepo and Akinlolu A Ponnle
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: INTERNATIONAL JOURNAL OF MACHINE TOOLS AND MANUFACTURE, 2004
Author: Amiolemhen, P. E. / Ibhadode, A. O.
Justification for Oil Well Stimulation
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Okotie Sylvester, Ubani C. E., Ikporo Bibobra
Numerical Investigation of Thermo-Mechanical Behaviour of Ball Grid Array Solder Joint at High Tempe ...
Journal: al: Advanced Materials Research , 1994
Author: E.H. Amalu, N.N. Ekere, R.S. Bhatti, S. Mallik, G. Takyi, A.O. Akii Ibhadode
Biosynthesis, Electrochemical,Antimicrobial and Antioxidant Studies of Silver Nanoparticles Mediated ...
Journal: J Clust Sci, 2017
Author: Elias E. Elemike, Damian C. Onwudiwe,Omolola E. Fayemi, Anthony C. Ekennia, Eno E. Ebenso Louwrens R. Tiedt
Modeling and Optimization of Hard Turning Operations on 41Cr4 Alloy Steel using Response Surface Met ...
Journal: International Journal of Mechanical Engineering and Applications (IJMEA), 2016
Author: Izelu C. O., Ezeh S. C. and Ashiedu F. I.
A combined algorithm approach to fuel consumption rate analysis and prediction of sea-worthy diesel ...
Journal: Journal of Engineering for the Maritime Environment, 2016
Author: Thaddeus C Nwaoha Garrick Ombor and Modestus O Okwu
Some physical and mechanical properties of palm kernel shell (PKS)
Journal: Botswana Journal of Technology, 2010
Author: IM Dagwa, AO Ibhadode
The Design of a Manual Table-Top Grinder,
Journal: Scholars Journal of Engineering and Technology,, 2014
Author: Abdulmalik, I.O., Michael, A., Akonyi, N.S., Mgbemena, C.O., Aaron-Orsu, C.J Ambali, A.O.
A Machine Learning Model for the Classification of Human Emotions
Journal: International Journal of Computer Sciences and Engineering , 2024
Author: D. A. Oyemade, D. F. Seregbe
Evaluation of the Levels of Phthalate Ester Plasticizers in Surface Water of Ethiope River System, N ...
Journal: Journal of Applied Sciences and Environmental Management, 2016
Author: Edjere, O., Asibor, I.G. and Otolo, S.E.
Design and Implementation of a Digital Thermometer with Clock
Journal: GLOBAL JOURNAL OF ENGINEERING RESEARCH, 2016
Author: Benjamin O. Akinloye, AARON O. ONYAN, Donaldson E. Oweibor
Design and Development of an Integrated Small-Scale Oil Palm Fruit Processing Mill
Journal: Advanced Materials Research, 1994
Author: C.O. Ilechie, A.O. Akii Ibhadode, B.O. Abikoye
Computerised Design Approach to a Sub-Press Mould for Composite Materials Manufacture
Journal: al: Advanced Materials Research, 1994
Author: Ishaya Musa Dagwa, A.O. Akii Ibhadode
Implementation of Koha Integrated Library Management Software (ILMS): The Babcock University Experie ...
Journal: Canadian Social Science, 2012
Author: Saturday U. Omeluzor, Olugbenga Adara, Madukoma Ezinwayi, Itunu A. Bamidele and Felicia Oby Umahi
Assessing mechanical properties of natural fibre reinforced composites for engineering applications ...
Journal: Journal of Minerals and Materials Characterization and Engineering, 2012
Author: Samuel, O.D., Agbo, S. and Adekanye, T.A.
Design and Development of a Petrol-powered Hammer mill for rural Nigerian Farmers
Journal: Journal of Energy Technologies and Policy, 2014
Author: Adekomaya, S.O., Samuel, O.D
Sequestering of Fe and Pb ions from Wastewater by Canarium schweinfurthii after carbonization and ch ...
Journal: Journal of Applied Science and Environmental Management, 2016
Author: Bassey Uwem, Oghenekohwiroro Edjere and Solomon Ebiye Otolo
Thermal stability of pulverized palm kernel shell (PKS) based friction lining material locally deve ...
Journal: ChemXpress , 2014
Author: Mgbemena, C.O., Mgbemena, C.E. Okwu, M.O.
Integrating and Forecasting Power output in Renewable Energy power Plants via Computer Networking
Journal: nternational Journal of Emerging Sciences, 2012
Author: O.D. Samuel, Frank Onaifo, W.O. Igbabini
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in industry, 2011
Author: C.U. ATUANYA, A.O.A. IBHADODE, A.C. IGBOANUGO
Economic Evaluation of Electrical Submersible Pump (ESP) and Gas Lift Well For Production Optimizati ...
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Ezekiel Chuks., Okotie Sylvester.and Dulu Appah
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
An Optimized Parallel Hybrid Architecture for Cryptocurrency Mining
Journal: Computing, Information Systems, Development Informatics Allied Research Journal, 2021
Author: David Allenotor, David Ademola Oyemade
Empirical Model for Bioethanol Production Process from Corn Stover Using Response Surface Methodolog ...
Journal: International Journal of Emerging Trends in Engineering and Development, 2016
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora, Eke Akachukwu Ben
Predicting Crude Oil Sales in NNPC Mega Station Awka, Anambra State, Nigeria.
Journal: Journal of Scientific and Engineering Research., 2016
Author: Umeozokwere, A.O., Oreko B.U., Offor I.C., Udoye, B.O.
Contextualization of Entrepreneurial Education in Production Engineering Discipline
Journal: Journal of Emerging Trends in Education and Policy Studies (JETERAPS) , 2011
Author: Igboanugo Anthony C. and Ashiedu Festus
Boyer Moore string-match framework for a hybrid short message service spam filtering technique
Journal: International Journal of Artificial Intelligence (IJ-AI), 2021
Author: Arnold Adimabua Ojugo, David Ademola Oyemade
Small and Meduim Scale Enterprises- Catalyst for National Development in Nigeria
Journal: Journal of Scientific and Industrial Studies, 2007
Author: Akpoturi P.E
Effects of breadfruit seed hull ash on the microstructures and properties of AlSiFe alloy/breadfruit ...
Journal: undefined!, 2012
Author: C.U.AtuanyaaA.O.A.Ibhadode.M.Dagwac
Tourist Sites in Delta State, Nigeria
Journal: Achieving Millennium Development Goals Through Mapping, David A. Musa and W.D.C Wokoma (ed), 2007
Author: Onosemuode, C .
Fuzzy Based System for Power Consumption Prediction
Journal: Journal of Engineering Science and Computing, , 2017
Author: EMAGBETERE, Eyere, BOYE, E. ThankGod, OGHENEVWAIRE, S. Iyabo
Removal of Some Heavy Metals from Incinerator Bottom Ash Using Coconut (Cocos Nucifera) Husk
Journal: International Journal of Chemistry, 2016
Author: Doris F. Ogeleka, Harrison E. Avrukpere, Elias E. Elemike, Oghenekohwiroro Edjere, Iwekumo E. Agbozu
Optimisation of Alkaline Ethanolysis of Biodiesel Yield from Nigerian Coconut Oil using One Variable ...
Journal: JENRM, 2014
Author: Samuel O.D., Okwu M. O., Oreko U.O., Amosun S. T.
Hyperelastic modelling and limit stress prediction of a P195/55 R16 85H Radial tire developed from N ...
Journal: American Journal of Material Sciences and Applications., 2014
Author: Ihueze, C.C, Mgbemena, C.O.
Barium Sulphate Scaling Prevention
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Obot I., Okotie S.and Dulu A
On the realization of the Equilibrium State of FluidBorne Marine Vessels
Journal: International Journal of Science and Technology (IJST) , 2016
Author: Obinabo E. C., Nwaoha T. C. and Ashiedu F. I.
Biodiesel development strategies in fossil-driven economy of Nigeria.
Journal: AKGEC Journal of Technology,, 2012
Author: Samuel ,Olusegun .David
Measurements and Evaluation of Anthropometric Data of Nigerian Adult Paraplegics for Wheelchair Desi ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences (JETEAS) , 2013
Author: Ashiedu, F. I. and Igboanugo A. C.
The Pareto principle and Hazard model as tools for appropriate scheduled maintenance in a manufactur ...
Journal: African Journal of Science, Technology, Innovation and Development, 2016
Author: Fadeyi, J.A., Okwu, M.O., Mgbemena, C.O., Ezekiel, K.C. (2016).
PERFORMANCE OF AN AUTOMOTIVE BUMPER FROM LALLOH 2 (Corchorustriden L.) PLANT FIBRE REINFORCED EPOXY ...
Journal: Nigerian Journal of Technology (NIJOTECH), 2016
Author: M Sumaila, AOA Ibhadod
ENTROPY GENERATION IN COMBINED HEAT AND MASS TRANSFER EFFECT ON MHD FREE CONVECTION FLOW PAST AN OSC ...
Journal: Journal of Mathematics and Science (JMS) , 2015
Author: OKEDOYE A. M
Laser Surface Micro/nano Patterning for Improving Aerodynamic Performance
Journal: Ph. D Thesis, 2015
Author: Otanocha, O.B
Design, Construction, Testing and Operation of Some Laboratory Equipment for Materials Testing
Journal: Advanced Materials Research, 1994
Author: Ishaya Musa Dagwa, A.O. Akii Ibhadode