PUBLICATIONS
Economic Evaluation of Electrical Submersible Pump (ESP) and Gas Lift Well For Production Optimizati ...
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Ezekiel Chuks., Okotie Sylvester.and Dulu Appah
Trace Determination of Phthalates in ground water Sample by GC-MS using specific sample concentratio ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences, 2016
Author: Edjere, O., Pollard, P., and Maier, U.
Development of home made crucibles for traditional metal casting
Journal: Journal of the Nigerian Institution of Production Engineers, 1998
Author: IBHADODE, A.O.A.
Procedure for calculating shear rate in the reservoir in Niger Delta
Journal: Journal or Engineering and Energy Research, 2014
Author: Akpoturi Peters
Technical Properties of Some Plant Fibres Compared with Glass Fibre
Journal: : International Journal of Engineering Research in Africa , 2010
Author: M. Sumaila, A.O. Akii Ibhadode
Solar Hydrogen Fuel Cell Technology, Principle, Applications and Market
Journal: Journal of Energy Technologies and Policy, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles, ONYAN AARON OKIEMUTE
Integration and Analysis of Unstructured Data for Decision Making: Text Analytics Approach
Journal: International Journal of Open Information Technologies, 2016
Author: Orobor Anderson Ise
A Deterministic Approach to Measurement of Noise Operations on 41Cr4 Alloy Steel using Response Surf ...
Journal: International Journal of Mechanical Engineering and Applications (IJMEA) , 2016
Author: Obinabo E. C. Nwaoha T. C., Ashiedu F. I., and Izelu C. O.
Design of Maximum Power Point Tracker (MPPT) and Phase Locked Loop (PLL) in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
Modeling Work Task and the Bending Capabilities of Subjects
Journal: Journal of the Nigerian Association of Mathematical Physics , 2012
Author: Igboanugo, A. C. Ashiedu, F. and Onifade M. K.
Total Hydrocarbon Content in water and sediment samples from coastal region of Nigeria
Journal: journal ofEngineering Science and Technology, 2010
Author: Otitigbe F and Akpoturi P.E
Advances in materials and systems technologies
Journal: Advanced materials research, 2007
Author: A O Ibhadode
Effects of breadfruit seed hull ash on the microstructures and properties of AlSiFe alloy/breadfruit ...
Journal: Elsevier Science Direct- Results in Physics, 2012
Author: lC.U.Atuanya A.O.A.Ibhadode.M.Dagwa
Online Information Behaviour of Women on Household Products, Appliances and FashionELTA STATE, NIGER ...
Journal: Ebonyi Journal of Library and Information Science, 2015
Author: Saturday U. Omeluzor, Chima Evans Otuza and Alarape Asimi Akibu
Use of inequalities in the determination of control systems compensation parameters
Journal: Advances in Modeling Analysis C. AMSE Press, 1993
Author: IBHADODE, A.O.A
Indigenous development of a 3horsepower petrol engine
Journal: Nigerian Journal of Engineering Research and Development, 2006
Author: IBHADODE, A.O.A. and AMALU, E.H.
Hydrological Analysis of Onitsha North East Drainage Basin Using Geoinformatic Techniques.
Journal: World Applied Sciences Journal , 2010
Author: Onosemuode C. Adetimirin O. I and Aboderin S. O.
Evaluation of the Cost and Effect of Industrial Accidents
Journal: European Journal of Scientific Research, 2015
Author: Yusuf, T.A., Ismaila, S.O., Kuye, S.I. and Samuel, O.D.
Accident Causative Model in the Oil and Gas Conurbation using Markov Chain
Journal: International Journal of Scientific Research in Information Systems and Engineering (IJSRISE), 2016
Author: Okwu, M. O., Thaddeus Nwaoha, ., Adeyemi, I. O., Ezurike Benjamin. O
Office Noise Pollution in industrial and commercial premises in Nigeria
Journal: Nigerian journal of Industrial and Systems Studies (NJISS), 2005
Author: Akpoturi P E and J Ndukwe
Risering of a Four-Cavity Die Production Mould by Convectional Method
Journal: Advanced Materials Research, 1994
Author: Prof. A.O. Akii Ibhadode, A.I. Igbafe and B.U. Anyata
Environmental Pollution from Port Harcourt Refinery - A System Approach
Journal: journal of Engineering and Environmental Studies, 2006
Author: Akpoturi P.E
Synthesis, crystal structure, electrochemical and anti-corrosion studies of Schiff base derived from ...
Journal: Molecular structure, 2017
Author: Elias E. Elemike, Damian C. Onwudiwe, Henry U. Nwankwo, Eric C. Hosten
Polychlorinated Biphenyls (PCBs) levels in Cured Paints from Southern Nigeria
Journal: Nigerian Journal of Applied Sciences, 2017
Author: Edjere, O., Asibor, I. and Otolo, S, Bassey, U.
Predicting Crude Oil Sales in NNPC Mega Station Awka, Anambra State, Nigeria.
Journal: Journal of Scientific and Engineering Research., 2016
Author: Umeozokwere, A.O., Oreko B.U., Offor I.C., Udoye, B.O.
A survey of traditional foundries and forge shops and a training programme for traditional metal cra ...
Journal: Benin Journal of Educational Studies, 1999
Author: IBHADODE, A.O.A
Adsorption and desorption performances of Eichhornia crassipes (water hyacinth) roots and leaves pow ...
Journal: Ovidius University Annals of Chemistry, 2025
Author: Tesi, G.O., Ejeromedoghene, O., Alli, Y.A., Okunoja, H.B. and Ipeaiyeda, A.R.
CONTAMINATION OF SOIL AND RIVERS BY LEAD FROM USED ENGINE OIL: A CASE STUDY OF CHOBA COMMUNITY IN PO ...
Journal: Pollution Research., 2011
Author: K.M. OGHENEJOBOH and E.O. OHIMOR
Geochemistry and Environmetric Approaches to Estimating Pollution Impacts on soils around Okaba Coa ...
Journal: Brit. Jour of Applied Science and Technology, 2014
Author: Ameh, E.G. Imasuen, I.O. and Imeokparia, E.G
Microbial Community Structure of an Oil Polluted Site In Effurun, Nigeria.
Journal: International Research Journal of Public and Environmental Health , 2017
Author: Ataikiru, T. L., Okorhi-Damisa, B. F. and J. I. Akpaiboh
Analytical Solution of MHD Free Convective Heat and Mass Transfer Flow in a Porous Medium.
Journal: The Pacific Journal of Science and Technology, 2013
Author: Akindele Michael Okedoye Ph.D.
Performance Evaluation of the Predictive Models for Free Fatty Acid Content and Biodiesel Yield from ...
Journal: International Journal of Engineering Research Technology (IJERT), 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
A Validation Method of Computational Fluid Dynamics (CFD) Simulation against Experimental Data of Tr ...
Journal: American Journal of Engineering Research (AJER), 2017
Author: ThankGod E. Boye, Thaddeus C. Nwaoha Samuel D. Olusegun, Festus I. Ashiedu
Effects of breadfruit seed hull ash on the microstructures and properties of AlSiFe alloy/breadfruit ...
Journal: undefined!, 2012
Author: ites Author links open overlay panelC.U.AtuanyaaA.O.A.Ibhadode.M.Dagwa
Citizens Adoption of SMS Based E-Government Services in Lagos State, Nigeria, Journal of Emerging Tr ...
Journal: Journal of Emerging Trends in Computing and Information Sciences, 2012
Author: Chete, F. O., Oyemade, D., Abere, R., Chiemeke, S. C., Ima-Omasogie, I.
Development of Asbestos-Free Friction Lining Material from Palm Kernel Shell
Journal: Journal of the Brazilian Society of Mechanical Sciences, 2008
Author: A. O. A. Ibhadode, I. M. Dagwa
Modelling prevention and reduction methods of ship propeller cavitation under uncertainty, Ships and ...
Journal: Ships and Offshore Structures, 2017
Author: 1. Thaddeus C. Nwaoha, Sidum Adumene and ThankGod E. Boye
Evaluation of antibacterial activities of silver nanoparticles green-synthesized using pineapple lea ...
Journal: micron, 2014
Author: Elemike Elias Emeka, Oseghale Charles Ojiefoh, Chuku Aleruchi,Labulo Ayomide Hassan, Owoseni Mojisola Christiana, Mfon R
Picosecond laser surface micro-texturing for the modification of aerodynamic and dust distribution c ...
Journal: Cogent Engineering , 2016
Author: Omonigho B. Otanocha, Li Lin, Yuanye Zhou, Shan Zhong Liu Zhu
The Influence of Process Variables on Load and Accuracy When Forging in a Completely Closed Cavity D ...
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Institution of Mechan, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
The Effect of Billet Location on Completely Closed Cavity Die Forging
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
Utilization of Nigerian precious Resource in the Niger Delta Region for the benefit of the Ecosystem ...
Journal: International Journal of Engineering and Technology (IJET), 2014
Author: Okotie Sylvester and Ikporo Bibobra
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetro journal , 2015
Author: Ovuema Augustina and Okotie Sylvester
Application of Markov Theoretical Model in Predicting Risk Severity and Exposure Levels of Workers i ...
Journal: International Journal of Mechanical Engineering and Applications, 2016
Author: Okwu Modestus Okechukwu Thaddeus C. Nwaoha Ombor Garrick
Evaluation of Pure Aluminium Inoculated with Varying Grain Sizes of an Agro-waste based Inoculant
Journal: Advances in Science, Technology and Engineering Systems Journal , 2017
Author: 2. Adeyemi I. Olabisi, ThankGod E. Boye, Emagbetere Eyere
PERFORMANCE OF AN AUTOMOTIVE BUMPER FROM LALLOH 2 (Corchorustriden L.) PLANT FIBRE REINFORCED EPOXY ...
Journal: Nigerian Journal of Technology, 2016
Author: M. Sumaila and A. O. A. Ibhadode
Forecasting Price Direction and Spread Options in Oil Volatility
Journal: Computing, Information Systems, Development Informatics Allied Research Journal (CISDIAR Journal), 2017
Author: A.A. Ojugo and D. Allenotor.,
Estimation of Pressure Drop, Liquid Holdup and Flow Pattern in a Two Phase Vertical Flow
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Omon E., Dulu A. and Okotie S.
Corner filling characteristics in precision forging
Journal: International Journal of Machine Tools and Manufacture , 1988
Author: A.O.A. Ibhadode,T.A.Dean