PUBLICATIONS
Assessment of the Social and Environmental Impacts of Keffi-Lafia Federal Highway.
Journal: International Journal of Physical Science. , 2011
Author: Onosemuode, C and Akwa, L
Porosity-Permeability Regimes in Reservoirs for Hydrocarbon Prospectivity in Nembe Creek Field, Nige ...
Journal: Journal of Applied Geology and Geophysics, 2017
Author: G. I. Alaminiokuma and W. N. Ofuyah
Sorption of Mn(II) ions from wastewater using dried and blended water hyacinth (Eichhornia crassipes ...
Journal: Journal of the Turkish Chemical Society Section A: Chemistry,, 2024
Author: Tesi, G.O., Ejeromedoghene, O., Kpomah, B. and Ipeaiyeda, A.R.
Design, production and performance testing of two component cutting force dynamometer
Journal: Journal of the Nigerian Institution of Production Engineers, 1998
Author: DAGWA, I.M. and IBHADODE, A.O.A.
Modeling Hyperelastic Behavior of Natural Rubber/Organomodified Kaolin Composites Oleochemically Der ...
Journal: Journal of Scientific Research Reports, , 2014
Author: Ihueze,C.C Mgbemena,C.O.
Design of DC-link Voltage Controller and Grid Current Controller in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
Biosynthesis, characterization and antimicrobial effect of silver nanoparticles obtained using Lavan ...
Journal: Res.Chem Int, 2017
Author: Elias E. Elemike, Damian C. Onwudiwe,Anthony C. Ekennia Lebogang Katata-Seru
Analyzing Thermal Insulation for Effective Hydrate Prevention in Conceptual Subsea Pipeline Design
Journal: International Journal of Current Engineering and Technology, 2015
Author: Okologume Wilfred and Dulu Appah
COMPARATIVE ANALYSIS OF HYDROCARBON CONTAMINATED SOIL USING MICROBIAL CULTURE, ORGANIC AND INORGANIC ...
Journal: IInternational Journal of Scientific Development and Research , 2020
Author: Okorhi-Damisa, F. B, Odesiri-Eruteyan E.A L.
Solar Hydrogen Fuel Cell Technology, Principle, Applications and Market
Journal: Journal of Energy Technologies and Policy, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles, ONYAN AARON OKIEMUTE
Nigeria Natural Gas Supply Preference and the Environment
Journal: Journal of Energy Technologies and Policy, 2014
Author: Wilfred Chinedu Okologume
DESIGN AND DEVELOPMENT OF A LOW-COST WASHING MACHINE SUITABLE FOR POLYTHENE MATERIALS
Journal: Asian Journal of Current Research, 2017
Author: EMAGBETERE EYERE, ADEYEMI I. OLABISI AND OGHENEKOWHO P. ARUOTURE1
Microbial Community Structure of an Oil Polluted Site In Effurun, Nigeria.
Journal: International Research Journal of Public and Environmental Health , 2017
Author: Ataikiru, T. L., Okorhi-Damisa, B. F. and J. I. Akpaiboh
EVALUATION OF PHTHALATES CONTENTSAND THEIR HEALTH EFFECTS IN CONSUMED SACHET WATER BRANDS IN DELTA S ...
Journal: INTERNATIONAL JOURNAL OF BIOLOGICAL, BIOMOLECULAR, AGRICULTURAL, FOOD AND BIOTECHNOLOGICAL ENGINEERING, 2016
Author: EDJERE OGHENEKOHWIRORO, ASIBOR IRABOR GODWIN, UWEM BASSEY
Estimation of pressdie system stiffness in mechanical press forging
Journal: Journal of the Nigerian Institution of Production Engineers, 1994
Author: IBHADODE, A.O.A. and DEAN, T.A
ACADEMIC CEREMONY SECURITY PLAN
Journal: Security, 2019
Author: Onakpoma Oboroghenerukohwo
A Quality of Service (QoS) Model for Forex Brokers Platforms
Journal: International Journal of Innovative Science, Engineering Technology, 2022
Author: Oyemade, D. A., Allenotor, D.
Numerical Investigation of Thermo-Mechanical Behaviour of Ball Grid Array Solder Joint at High Tempe ...
Journal: ADVANCED MATERIALS RESEARCH -ZUG-, 2012
Author: Amalu, E.H. / Ekere, N.N. / Bhatti, R.S. / Mallik, S. / Takyi, G. / Ibhadode, A.O.A.
The effect of die container compounding on product accuracy in completely closed cavity die forging
Journal: Manufacturing Engineering Society International Conference, Calatayud, Spain, 2005
Author: IBHADODE, A.O.A. and AIBANGBEE, G.F
Design of Maximum Power Point Tracker (MPPT) and Phase Locked Loop (PLL) in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
The Influence of Process Variables on Load and Accuracy When Forging in a Completely Closed Cavity D ...
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Institution of Mechan, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
Distribution of Phthalate Esters in Underground Water from Power Transmission Sites in Warri Metropo ...
Journal: Journal of Applied Sciences and Environmental Management, 2016
Author: Edjere, O., Asibor, I.G. and Bassey, U.
The influence of Creep on the Mechanical properties of Calcium Carbonate Nanofiller Reinforced Polyp ...
Journal: Journal of Minerals and Materials Characterization and Engineering. , 2011
Author: Ihueze, C.C., Mgbemena, C.O., Ugwu, S.
Application of Electrical Resistivity Method in the Assessment of Ground Water Potentials for Sustat ...
Journal: Annals of Environmental Studies, 2016
Author: Onosemuode C, Ataikiru L. T, and Oghama E.O
The geochemistry and depositional characteristics of Maastrichtan shales from southwest Nigeria.
Journal: Jour. of Min. Geology, , 2007
Author: Imeokparia, E.G., and Onyeobi, T.U.S
On the Unsteady Free Convective Flow with Radiative Heat Transfer of Sisko Fluid
Journal: International Journal of Innovative Science, Engineering Technology, 2015
Author: Akindele Michael Okedoye
Estimation of Pressure Drop, Liquid Holdup and Flow Pattern in a Two Phase Vertical Flow
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Omon E., Dulu A. and Okotie S.
Manufacture of hand hacksaw blades form locally available mild stee
Journal: The Nigerian Engineer, 1991
Author: IBHADODE, A.O.A. and OJEAH, C.C
Experimental Study of Induced Vibration and Work Surface Roughness in the Turning of 41Cr4 Alloy S ...
Journal: IJIRSET , 2013
Author: Eze S.C., Izelu, C.O., Oreko B.U., Edward B.A
Dynamics of Land use Change: A Case Study of Lafia, Nasarawa State, Nigeria
Journal: Geoinformatics Geostatistics: An Overview, 2017
Author: Onosemuode Christopher and Galadima Daniel Habila
Scale Inhibitor (SIH 307) Commissioning Using Langelier Saturation and Ryznar Stability Indices in A ...
Journal: International Journal of Engineering and Technical Research (IJETR), 2015
Author: Ohimor E.O, Oghenejobor K.M, Teddy Odisu, Iduh Donald and Onocha O.
Design and Development of a 10 Million Liters Capacity Petroleum Product Storage Tank.
Journal: The International Journal Of Engineering And Science (IJES)., 2016
Author: D.R. Enarevba, C.O. Izelu, B.U. Oreko and E. Emagbetere
Science and Technology - A Vehicle for Sustainable Development in Nigeria
Journal: journal of Engineering Management, 2002
Author: Akpoturi .P.E
Derivation of the von Mises and Tresca yield loci in plane stress from the yield surface in three di ...
Journal: Journal of the Nigerian Institution of Production Engineers, 1993
Author: IBHADODE, A.O.A
The Application of Artificial Neural Network in Prediction of the Performance of Spark Ignition Engi ...
Journal: International Journal of Engineering and Technologies, 2017
Author: O.C. Nwufo, Modestus O. Okwu, C. F. Nwaiwu, J.O. Igbokwe, E. E. Anyanwu
A Nonlinear Approach to Queueing System Modelling,
Journal: International Journal of Engineering Science and Technology, 2010
Author: Mgbemena, C.E., Mgbemena, C.O., Chinwuko, C.E
Design and Manufacture of a 30-ton Hydraulic Press
Journal: Mechanical Engineering Department, Federal University of Technology , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Optimization of coconut oil ethyl esters reaction variables and prediction model of its blends with ...
Journal: http://www.tandfonline.com/loi/tbfu20, 2016
Author: Olusegun David Samuel, Solomon Olanrewaju Giwa Abdulssalam El- Suleiman
Revolution and Challenges Associated with Developing Countries Power Sector: A Case Study of the Nig ...
Journal: Journal of Engineering Science Application (JESA), 2016
Author: E. I. Okhueleigbe, A. O. Okhueleigbe, J. A. Ogbekhiulu, D. Okene, C. U. Ogu, A. O. ONYAN
DETECTION OF CRACK LOCATION AND SIZE IN STRUCTURES USING HIGHER HARMONICS OF EXCITED FREQUENCY
Journal: Research Journal in Engineering and Applied Sciences, 2013
Author: Ezekiel Kingsley C., Okwu Modestus O., Johnson A. Fadeyi
Integration and Analysis of Unstructured Data for Decision Making: Text Analytics Approach
Journal: International Journal of Open Information Technologies, 2016
Author: Orobor Anderson Ise
ENERGY- CONTENT AND SPECTRAL ANALYSES OF SHOTS FOR OPTIMUM SEISMOGRAM GENERATION IN THE NIGER DELTA
Journal: International Journal of Geology, Earth Environmental Sciences, 2014
Author: Alaminiokuma G.I. and Emudianughe J.E.
Analytical Solution of MHD Free Convective Heat and Mass Transfer Flow in a Porous Medium.
Journal: The Pacific Journal of Science and Technology, 2013
Author: Akindele Michael Okedoye Ph.D.
Experimental Study on a Line-Axis Concentrating Solar Energy Collector for Water Heating
Journal: Industrial Engineering, 2017
Author: Frederick Ikpakwu, Anthony Okoronkwo, Modestus Okwu, Emmanuel Anyanwu
Indigenous development of a 3horsepower petrol engine
Journal: Nigerian Journal of Engineering Research and Development, 2006
Author: IBHADODE, A.O.A. and AMALU, E.H.
Effects of Process Variables on the Fermentation of Corn Stover: A Review
Journal: Journal of Scientific and Engineering Research, 2016
Author: Ohimor E. Onoghwarite, Ndirika V.I. Obiora, Eke A. Ben
ACCIDENT CAUSATIVE MODEL IN THE OIL AND GAS CONURBATION USING MARKOV CHAIN
Journal: International Journal of Scientific Research in Information Systems and Engineering , 2016
Author: Okwu, Modestus.O. Thaddeus Nwaoha Adeyemi, I. Olabisi and Ezurike Benjamin. O.
COMPARATIVE EVALUATION OF ARTIFICIAL LIFT METHODS ON A NIGER DELTA FIELD
Journal: Academic Research International , 2016
Author: Okologume Chinedu Wilfred, Ofesi Samuel F
A Validation Method of Computational Fluid Dynamics (CFD) Simulation against Experimental Data of Tr ...
Journal: American Journal of Engineering Research (AJER) , 2017
Author: Boye, Thankgod, Nwaoha, T. C., Samuel, O. D and Ashiedu, F. I.
Precision die design by the die expansion method
Journal: Materials science foundations, 2009
Author: Ibhadode, A. O. Akii