PUBLICATIONS
Application of Sinusoidal Model to a Maintenance Time Series Data.
Journal: Fupre Journal of Scientific and Industrial Research (FJSIR), 2017
Author: Popoola, E, O. and Ashiedu F. I.
Adjustment to Oil Saturation Estimate Due to Various Reservoir Drive Mechanisms
Journal: International Journal of Advanced Petroleum Engineering and Technology, 2014
Author: Okotie Sylvester and Ikporo Bibobra
Compositional, Geotechnical and Industrial Characteristics of Some Clay Bodies in Southern Nigeria
Journal: Jour. of Geography and Geology, 2013
Author: Onyeobi T.U.S Imeokparia, E.G. Ilegieuno O.A and Egbuniwe I.G
Accident Causative Model in the Oil and Gas Conurbation using Markov Chain
Journal: International Journal of Scientific Research in Information Systems and Engineering (IJSRISE), 2016
Author: Okwu, M. O., Thaddeus Nwaoha, ., Adeyemi, I. O., Ezurike Benjamin. O
Strategies to enhance Environmenatally Conscious Engineering safety Practices in Nigeria
Journal: journal of Engineering Studies, 2005
Author: Akpoturi P.E
Total Hydrocarbon Content in water and sediment samples from coastal region of Nigeria
Journal: journal ofEngineering Science and Technology, 2010
Author: Otitigbe F and Akpoturi P.E
Introduction to Manufacturing Technology
Journal: Open Journal of Energy Efficiency, 2013
Author: Mala Abba-Aji, Vincent Ogwagwu, Bukar Umar Musa, Prof. A.O. Akii Ibhadode (Contributor)
An investigation of the efficacy of enhanced oil recovery by means of micro-organisms in Niger Delta ...
Journal: J. Pet. Gas Explor. Res., 2014
Author: - Ikporo Bibobra. and Okotie Sylvester.
A Factorial Study of Accessibility Requirements of Paraplegics in a Built-up Environment
Journal: Journal of Innovative Research in Engineering and Science (JOIRES), 2011
Author: Ashiedu, F. And Igboanugo A. C.
Effect of Turning Parameters on Metal Removal and Tool Wear Rates of AISI 1018 Low Carbon Steel.
Journal: Nigerian Journal of Technology,, 2016
Author: Mgbemena, C.O., Mgbemena, C.E., Ashiedu, F.I. Etebenumeh, G. O.
International Journal of Engineering Research in Africa
Journal: International Journal of Engineering Research in Africa, 2010
Author: Editor-in-Chief: Dr. A.O.A. Ibhadode JERA Managing Director: Dr. Stanislav Kolesnichenko
The influence of Creep on the Mechanical properties of Calcium Carbonate Nanofiller Reinforced Polyp ...
Journal: Journal of Minerals and Materials Characterization and Engineering. , 2011
Author: Ihueze, C.C., Mgbemena, C.O., Ugwu, S.
A Quality of Service (QoS) Model for Forex Brokers Platforms
Journal: International Journal of Innovative Science, Engineering Technology, 2022
Author: Oyemade, D. A., Allenotor, D.
Experiences and Lessons Learnt From Embedding Sustainability in Engineering
Journal: World Congress on Engineering Education, 2015
Author: Otanocha, O.B., Tomkinson, B., Dobson, H., Cummings, C., Sanchez-Romaguera, V. and Tomkinson, R.
Organophosphate pesticides in herbal mixtures from Bayelsa State, Nigeria: implication for human exp ...
Journal: Journal of Environmental Exposure Assessment, 2025
Author: Tesi, G.O., Lari, B., Ogbuta, A.A., Felagha, I., Obodoka, G.C., Ogbomade, W.E., Okpara, K.E., Osioma, E. and Agbozu, I.E
Technical Properties of Some Plant Fibres Compared with Glass Fibre
Journal: : International Journal of Engineering Research in Africa , 2010
Author: M. Sumaila, A.O. Akii Ibhadode
Electricity Generation and Distribution in Nigeria: Technical Issues and Solutions.
Journal: International Journal of Engineering Science and Technology, 2011
Author: Chinwuko, E.C., Mgbemena, C.O., Ebhota, S.W Nwuba, E.I.U.
MHD Stagnation Point Flow over a Permeable Vertical Plate with a Convective Surface Boundary Conditi ...
Journal: International Journal of Innovative Science, Engineering Technology,, 2015
Author: Akindele Michael Okedoye
Pareto Principle and Hazard Model as Tools for Apporpriate Scheduled Maintenance in a Manufacturing ...
Journal: African Journal of Science, Technology, Innovation and Development, 2016
Author: Johnson A. Fadeyi, Modestus O. Okwu, Chinedum O. Mgbemena, Kingsley C. Ezekiel
Well Test and PTA for Reservoir Characterization of Key Properties
Journal: American Journal of Engineering and Applied Sciences, 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ogbarode Napoleon Ogbon
Malware Propagation on Social Time Varying Networks: A Comparative Study of Machine Learning Framewo ...
Journal: International Journal of Modern Education and Computer Science (IJMECS), 2014
Author: A.A. Ojugo, E. Ben-Iwhiwhu, O. Kekeje, M.O. Yerokun, I.J.B. Iyawa
Picosecond laser surface micro-texturing for the modification of aerodynamic and dust distribution c ...
Journal: Cogent Engineering , 2016
Author: Omonigho B. Otanocha, Li Lin, Yuanye Zhou, Shan Zhong Liu Zhu
Developments in the Measurement and Estimation Methods for Cement Clinker Quality Parameters
Journal: International Journal of Engineering Research Technology (IJERT), 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: International Journal of Machine Tools and Manufacture, 2004
Author: P.E. Amiolemhen, A.O.A. Ibhadode
The Role of Solid Mineral Mapping for Sustainable Development in Nasarawa State
Journal: M.E Ufuah and R.O. Olomo [ed.] Cartography and GIS for Sustainable Solid Mineral Development in Nigeria. A Publication, 2005
Author: Onosemuode Christopher
Directional Well Trajectory Design : The Theoretical Development of Azimuth Bends and turns in compl ...
Journal: Nigerian journal of technology (NIJOTECH), 2016
Author: P.O Okpozo, Akpoturi Peters, W.C Okologume
Methods, effect and challenges of Library instruction in academic libraries.
Journal: Library Philosophy and Practice., 2017
Author: Saturday U. Omeluzor, Alarape Asimi Akibu, Sunday Ikhimeakhu Dika and Clement C. Ukangwa
The Applied Geochemist and the Challenges of Georesource Evaluation for Sustainable development and ...
Journal: University of Benin, Benin City, 2015
Author: Imeokparia, E.G.
Development of a Production Mould for Casting Single - Cylinder Engine Pistons
Journal: ADVANCED MATERIALS RESEARCH -ZUG, 2007
Author: Zhengwuvi, L. B. / Ibhadode, A. O.A.
DISTRIBUTION OF PHTHALATE ESTERS IN UNDERGROUND WATER FROM POWER TRANSMISSION SITES IN WARRI METROPO ...
Journal: Journal of applied science and environmental management, 2016
Author: EDJERE, O ASIBOR, IG BASSEY, U
Finite Element Analysis and Design Validation of High Pressure Gate Valve for a Typical Nigerian Oil ...
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: ThankGod E. Boye, Thaddeus C. Nwaoha, Adeyemi I. Olabisi
Determination of Optimum Manufacturing Conditions for Asbestos-free Brake Pad using Taguchi Method
Journal: Nigerian Journal of Engineering Research and Development, 2006
Author: Dagwa, Ishaya - Ibhadode, A.O.Akii
APPLICATION OF CASSAVA PEELS ACTIVATED CARBON IN THE TREATMENT OF OIL REFINERY WASTEWATER A COMPARA ...
Journal: Journal of Ecological Engineering, 2016
Author: Kigho Moses Oghenejoboh, Smith Orode Otuagoma, Evuensiri Onogwharite Ohimor
Determination of Hydrocarbon Properties produced from different oil fields in Nigeria
Journal: journal of Engineering Science and Technology, 2010
Author: Otitigbe F and Akpoturi P.E
Preliminary study on antimicrobial activity of friendly bacteria isolated from dairy products: Prel ...
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2005
Author: OKORHI F. BEATRICE AND ATAIKIRU TEGA
APPLICATION OF DESIGN EXPERT IN THE ANALYSIS OF RESPONSE TRANSFORMATION OF PROCESSES A CASE STUDY O ...
Journal: International Journal of Advanced Research (IJAR), 2017
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora and Eke Akachukwu Ben.
Isolation and Characterization of Hydrocarbon Utilizing Yeast (HUY) Isolates from Palm Wine
Journal: American Journal of Molecular Biology, 2016
Author: Okerentugba, P.O., Ataikiru, T.L. and Ichor, T.
Delineating the Proper Shooting Medium for Seismic Reflection Survey in the Greater Ughelli Depobelt ...
Journal: Geophysics Remote Sensing, 2014
Author: Alaminiokuma, G. I. and Emudianughe, J. E.
Physico-Chemical and Bacteriological Assessment of Abattoir Effluents and its effect on Agbarho Rive ...
Journal: Nigerian Journal of Applied Science, 2017
Author: Asibor, I., Edjere, O., and Ofejiro, P.
IMPLEMENTATION OF A MICROCONTROLLER BASED PURE SINE WAVE INVERTER
Journal: International Journal of Scientific Engineering and Applied Science (IJSEAS), 2017
Author: GODSWILL OFUALAGBA AND CHARLES KEVWE IGBINOBA
Design of a Photovoltaic Grid-Connected DC-AC Inverter
Journal: International Journal of Emerging trends in Engineering and Development, 2012
Author: (6) Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in industry, 2011
Author: C.U. ATUANYA, A.O.A. IBHADODE, A.C. IGBOANUGO
Using factor Cluster analysis and enrichment methods to evaluate impact of cement production on str ...
Journal: Advances in Applied Science Research, 2011
Author: Ameh, E.G., Kolawole, M.S. and Imeokparia, E.G.
Performance Evaluation of a Pilot Paraplegic Centricity Mobility Aid
Journal: Nigeria Journal of Technology (NIJOTECH), 2016
Author: Ashiedu F. I., Popoola E. O., and Akpan E. E.
Microbial Community Structure of an Oil Polluted Site In Effurun, Nigeria.
Journal: International Research Journal of Public and Environmental Health , 2017
Author: Ataikiru, T. L., Okorhi-Damisa, B. F. and J. I. Akpaiboh
The viability of compressed natural gas (CNG) as an alternative automobile fuel in Nigeria
Journal: Journal of Social Management Sciences, 1997
Author: AKELE, S.M.G. and IBHADODE, A.O.A.
Measurements and Evaluation of Anthropometric Data of Nigerian Adult Paraplegics for Wheelchair Desi ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences (JETEAS) , 2013
Author: Ashiedu, F. I. and Igboanugo A. C.
Performance Evaluation of the Predictive Models for Free Fatty Acid Content and Biodiesel Yield from ...
Journal: International Journal of Engineering Research Technology (IJERT), 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Preliminary Study on Antimicrobial Activity of Friendly Bacteria Isolated from Dairy Products
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2015
Author: Okorhi-Damisa, F. B. and Ataikiru, T. L.
Precision die design by the die expansion method
Journal: Materials science foundations, 2009
Author: Ibhadode, A. O. Akii