PUBLICATIONS
Porosity-Permeability Regimes in Reservoirs for Hydrocarbon Prospectivity in Nembe Creek Field, Nige ...
Journal: Journal of Applied Geology and Geophysics, 2017
Author: G. I. Alaminiokuma and W. N. Ofuyah
Static Analysis of Tyre Model Developed from Natural Rubber Vulcanizates.
Journal: Lecture Notes in Computer Science, 2016
Author: Mgbemena, C.O., Mgbemena, C.E., Ashiedu, F.I. Menon, A.R.R. Oral Paper presented at The 2016 International Conference
On a Method for Die Container Design in Completely Closed Die Forging
Journal: TRANSACTIONS- AMERICAN SOCIETY OF MECHANICAL ENGINEERS JOURNAL OF MECHANICAL DESIGN, 1997
Author: Ibhadode, A. O. A.
Identification and Morphology of pathogens in liquid effluent from a biodigester with cow dung feed ...
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2020
Author: Ogunkeyede A.O, Okorhi-Damisa B.F, Tedjere E, and Adeniyi S.
Improved Correlation for Predicting Stock Tank Gas-Oil Ratio in Niger Delta
Journal: Onepetrol Journal, 2016
Author: Hilary Okeke. and Okotie Sylvester
Using factor Cluster analysis and enrichment methods to evaluate impact of cement production on str ...
Journal: Advances in Applied Science Research, 2011
Author: Ameh, E.G., Kolawole, M.S. and Imeokparia, E.G.
The Assessment of Baseline Ecological Data for Environmental Management: A Case study of the Coasta ...
Journal: The Nigeria Academic Forum, 2004
Author: Onosemuode Christopher
Application of Electrical Resistivity Method in the Assessment of Groundwater Potential for Sustanab ...
Journal: Annals of Environmental Studies, 2016
Author: Onosemuode, C., Ataikiru, T. L. and Oghama, O. E.
Computer Aided Structural Analysis of Axle Tilting Effect on Tractor Front Axle Support.
Journal: Innovative Systems Design and Engineering,, 2014
Author: Aduloju, S.C., Mgbemena, C.O., Ebhota,W.S., Bolarinwa, G.O.
Risering of a Four-Cavity Die Production Mould by Convectional Method
Journal: Advanced Materials Research, 1994
Author: Prof. A.O. Akii Ibhadode, A.I. Igbafe and B.U. Anyata
Investigating the Calibration Curves for a Two Component Cutting Tool Lathe Dynamometer Using Finite ...
Journal: International Journal of Engineering Research in Africa, 2010
Author: Osezua Obehi Ibhadode, Ishaya Musa Dagwa, Akii Okonigbon Akhaehomen Ibhadode
Assessment of the Impacts of Refinery Effluent on the Physico-chemical Properties of Ubeji Creek, De ...
Journal: Journal of Environmental Analytical Toxicology , 2017
Author: Eunice OE, Frank O, Voke U, Godwin A
COMPARATIVE EVALUATION OF ARTIFICIAL LIFT METHODS ON A NIGER DELTA FIELD
Journal: Academic Research International , 2016
Author: Okologume Chinedu Wilfred, Ofesi Samuel F
Physico-Chemical and Bacteriological Assessment of Abattoir Effluents and its effect on Agbarho Rive ...
Journal: Nigerian Journal of Applied Science, 2017
Author: Asibor, I., Edjere, O., and Ofejiro, P.
Ecological effects of oil spill on pelagic and bottom dwelling organisms in the riverine areas of Od ...
Journal: Journal of Ecology and the Natural Environment. , 2016
Author: Doris Fovwe Ogeleka, Oghenekohwiroro Edjere, Angela Nwudu and Felix Ebodaghe Okieimen
Computational Modeling of Extracellular Matrix Protein Stamping on Hard Substrates for Biomedical Mi ...
Journal: Advances in Life Science and Technology, , 2014
Author: Aduloju, S.C., Nima, R., Mgbemena, C.O., Soboyejo, W.O.
Experimental Study on a Line-Axis Concentrating Solar Energy Collector for Water Heating
Journal: Industrial Engineering, 2017
Author: Frederick Ikpakwu, Anthony Okoronkwo, Modestus Okwu, Emmanuel Anyanwu
A Basic Approach To Designing Embedded Systems Using a Simple Calculator and C Programming Language
Journal: Nigerian Journal of Technology, 2014
Author: F. Tanshi, N. Bello
Simulation and experimental verification of completely closed cavity die forging on a mechanical pre ...
Journal: Proc. Institution of Mechanical Engineers, 1989
Author: IBHADODE, A.O.A. and DEAN, T.A
Effect of mixed Alkaline Earth Oxides in Potash Silicate Glass.
Journal: Nigerian Journal of Technology (NIJOTECH), 2015
Author: Ashiedu F. I. and Akpan E. E.
A Typified Greedy Dynamic Programming Model for the MetaTrader Platform
Journal: Journal of Advances in Mathematical and Computational Sciences, 2020
Author: Oyemade, D. A.
Development and properties tests of aluminium grease for low velocity applications.
Journal: The Pacific Journal of Science and Technology, 2012
Author: Samuel, O.D, Isiaka, I.O and Omoleye, J.A.
Existence and uniqueness, and asymptotic stability analysis of solution of a retarded equation model ...
Journal: icastor Journal of Mathematical Sciences, 2010
Author: Igobi, D. K. and Egwurube, M. and Musa, Samuel and Oyemade, D. A.
Environmental Pollution from Port Harcourt Refinery - A System Approach
Journal: journal of Engineering and Environmental Studies, 2006
Author: Akpoturi P.E
Study on the Corrosive Nature of Soil PhysicoChemical Characteristics Toward Pipelines in Oil Produc ...
Journal: Asian Soil Research Journal, 2022
Author: Eunice Asiboroko Odesiri-Eruteyan a, Okorhi Folawe Beatrice and Ogwuche Christiana Ene
The Use of Geoinformatics Techniques in Site Selection for solid Waste Dump A Case Study of Warri an ...
Journal: International Journal of Science and Research (IJSR), 2017
Author: Christopher Onosemuode and Omorogbe Osemwegie
Dynamics of Land use Change: A Case Study of Lafia, Nasarawa State, Nigeria
Journal: Geoinformatics Geostatistics: An Overview, 2017
Author: Onosemuode Christopher and Galadima Daniel Habila
Barium Sulphate Scaling Prevention
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Obot I., Okotie S.and Dulu A
The Effect of Calcium Carbonate at Low Volume Fractions On the Mechanical Properties of Polypropylen ...
Journal: Journal of Engineering and Applied Sciences, , 2010
Author: Mgbemena, C.O., Ubani, N.O., Mgbemena, C.E.
Gas Lift a tool to Production Optimization
Journal: International Journal of Oil, Gas and Coal Engineering, 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ovuema Augustina
Crystal structure of tetraaquabis(3,5-diamino- 4H-1,2,4-triazol-1-ium)cobalt(II) bis[bis(pyridine-2, ...
Journal: Acta Cryst, 2015
Author: Atim Johnson, Justina Mbonu, Zahid Hussain, Wan-Sin Lohe and Hoong-Kun Funf,
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: Australian Journal of Engineering Research. , 2015
Author: C.O Izelu, Eze S.C, Oreko B.U and Edward, B.A
Performance Evaluation of Multicast Protocols
Journal: SAU Science-Tech Journal, 2017
Author: Akpojaro, J., Omogbhemhe, M., Oyemade, D. A.
DETECTION OF CRACK LOCATION AND SIZE IN STRUCTURES USING HIGHER HARMONICS OF EXCITED FREQUENCY
Journal: Research Journal in Engineering and Applied Sciences, 2013
Author: Ezekiel Kingsley C., Okwu Modestus O., Johnson A. Fadeyi
Assessment of total petroleum hydrocarbons contents in water and soil samples from power station dis ...
Journal: Journal of Applied Science, 2016
Author: Edjere, O., Asibor, G. and Bassey, U.
Picosecond laser surface micro-texturing for the modification of aerodynamic and dust distribution c ...
Journal: Cogent Engineering , 2016
Author: Omonigho B. Otanocha, Li Lin, Yuanye Zhou, Shan Zhong Liu Zhu
Optimal transesterification duration for biodiesel produced from waste frying oil
Journal: British Journal of Renewable Energy,, 2015
Author: Samuel, O.D., Amosun, S.T. and Boye, T.E.
Towards an Enhanced Product Line Engineering Process Model
Journal: Benin Journal of Advances in Computer Science, 2019
Author: Oyemade, D. A, Onibere, E. A.
Geostatistical Analysis of well Velocity Data for Enhanced Depth Imaging in the Niger Delta
Journal: Journal of Applied Geology and Geophysics, 2017
Author: G. I. Alaminiokuma and W. N. Ofuyah
Application of Electrical Resistivity Method in the Assessment of Ground Water Potentials for Sustat ...
Journal: Annals of Environmental Studies, 2016
Author: Onosemuode C, Ataikiru L. T, and Oghama E.O
An Optimal Investment Returns with N-Step Utility Functions
Journal: Bulletin of Mathematical Sciences and Applications, 2016
Author: EGHWERIDO Joseph Thomas and OBILADE Titilola
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: IJETAE , 2013
Author: C.O Izelu, Eze S.C, B.U. Oreko and Edward B.A.
The Design of a Linear Quadratic Optimal Regulator for Transient Heat flow in Continuous Casting of ...
Journal: International Journal of Current Research, 2016
Author: Obinabo E. C. Izelu C. O. Nwaoha T. C. and Ashiedu F. I.
Perception of Life in Rural Areas: A Case Study of Ughelli South Local Government Area.
Journal: The Nasara Journal of Humanities., 2003
Author: Onosemuode C.
Introduction to Manufacturing Technology
Journal: Open Journal of Energy Efficiency, 2013
Author: Mala Abba-Aji, Vincent Ogwagwu, Bukar Umar Musa, Prof. A.O. Akii Ibhadode (Contributor)
Design of Maximum Power Point Tracker (MPPT) and Phase Locked Loop (PLL) in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Justification for Oil Well Stimulation
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Okotie Sylvester, Ubani C. E., Ikporo Bibobra
Tool wear of some hacksaw blades
Journal: Journal of the Nigerian Institution of Production Engineers, 1994
Author: IBHADODE, A.O.A
INVESTMENT RETURNS WITH AN N-STEP GENERALIZED UTILITY FUNCTIONS
Journal: ICASTOR Journal of Mathematical Sciences, 2015
Author: EGHWERIDO. J. THOMAS, E. EFE-EYEFIA E. EKUMA-OKEREKE,
Design and Development of a Paraplegic Centricity Mobility Aid
Journal: Journal of Emerging Trend in Engineering and Applied Science (JETEAS) , 2012
Author: Ashiedu Festus and Igboanugo A. C.