PUBLICATIONS
Predicting Reservoir Behavior using Mathematical Models 3 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
An assessment of rural libraries and information services for rural development: A study of Delta St ...
Journal: The Electronic Library, 2017
Author: Saturday U. Omeluzor, Gloria O. Oyovwe-Tinuoye, Uche Emeka-Ukwu
Punch and Counterpunch Design by the Die Expansion Method in Completely Closed Die Forging
Journal: MATERIALS SCIENCE FORUM, 2006
Author: Ibhadode, A. O. A.
Experiences and Lessons Learnt From Embedding Sustainability in Engineering
Journal: World Congress on Engineering Education, 2015
Author: Otanocha, O.B., Tomkinson, B., Dobson, H., Cummings, C., Sanchez-Romaguera, V. and Tomkinson, R.
Application of re-refined used lubricating oil as base oil for the formulation of oil based drilling ...
Journal: Journal of Petroleum Technology and Alternative Fuels, 2013
Author: Oghenejoboh K. M., Ohimor E. O. and Olayebi O.
Office Noise Pollution in industrial and commercial premises in Nigeria
Journal: Nigerian journal of Industrial and Systems Studies (NJISS), 2005
Author: Akpoturi P E and J Ndukwe
Effect of chloride Ion in buffer medium on the liquid-liquid extraction of Cu(II) and Ni(II) using ...
Journal: International Journal of Solvent Extraction and Ion Exchange, 2005
Author: Uzokwu, B.A. and Mbonu, I. J.
Development and properties tests of aluminium grease for low velocity applications.
Journal: The Pacific Journal of Science and Technology, 2012
Author: Samuel, O.D, Isiaka, I.O and Omoleye, J.A.
Determination of Optimum Manufacturing Conditions for Asbestos-free Brake Pad using Taguchi Method
Journal: Nigerian Journal of Engineering Research and Development, 2006
Author: Dagwa, Ishaya - Ibhadode, A.O.Akii
Improving Physics Learning in Secondary Schools Using Metacognition.,
Journal: International Journal of Advances in Science and Technology, 2011
Author: Achufusi, N.N., Mgbemena, C.O., Mgbemena, C.E., Nwoye, A.
Work Flow for Reservoir Study and Challenges
Journal: Onepetrol Journal, 2015
Author: Okotie Sylvester. and Stanley Buduka. and Ikporo Bibobra
Improved Correlation for Predicting Stock Tank Gas-Oil Ratio in Niger Delta
Journal: Onepetrol Journal, 2016
Author: Hilary Okeke. and Okotie Sylvester
Effect of Sand invasion on Oil Well Production: A Case study of Garon Field in the Niger Delta
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Bibobra Ikporo and Okotie Sylvester
COMPARATIVE ANALYSIS OF HYDROCARBON CONTAMINATED SOIL USING MICROBIAL CULTURE, ORGANIC AND INORGANIC ...
Journal: IInternational Journal of Scientific Development and Research , 2020
Author: Okorhi-Damisa, F. B, Odesiri-Eruteyan E.A L.
Modeling to Support using Crouch Technique to Lift Low-Lying Objects
Journal: Journal of the Nigerian Association of Mathematical Physics , 2012
Author: Igboanugo, A. C. Ashiedu, F. And Onifade M. K.
Trace Determination of Phthalates in ground water Sample by GC-MS using specific sample concentratio ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences, 2016
Author: Edjere, O., Pollard, P., and Maier, U.
A Price-Based Grid Resources Pricing Approach for Non-Storable Real Assets
Journal: Journal of Advances in Mathematical Computational Science, 2022
Author: Allenotor, D.Oyemade, D. A.
Implementation of Koha Integrated Library Management Software (ILMS): The Babcock University Experie ...
Journal: Canadian Social Science, 2012
Author: Saturday U. Omeluzor, Olugbenga Adara, Madukoma Ezinwayi, Itunu A. Bamidele and Felicia Oby Umahi
Biodiesel development strategies in fossil-driven economy of Nigeria.
Journal: AKGEC Journal of Technology,, 2012
Author: Samuel ,Olusegun .David
Some physical and mechanical properties of palm kernel shell (PKS)
Journal: Botswana Journal of Technology, 2010
Author: IM Dagwa, AO Ibhadode
A Demonstration of Box Jenkins forecasting typology
Journal: The Nigerian Journal of Engineering Management, 2003
Author: IGBOANUGO, A.C., IBHADODE, A.O.A., and ODIGIE, F
The Effect of Calcium Carbonate at Low Volume Fractions On the Mechanical Properties of Polypropylen ...
Journal: Journal of Engineering and Applied Sciences, , 2010
Author: Mgbemena, C.O., Ubani, N.O., Mgbemena, C.E.
DISTRIBUTION OF PHTHALATE ESTERS IN UNDERGROUND WATER FROM POWER TRANSMISSION SITES IN WARRI METROPO ...
Journal: Journal of applied science and environmental management, 2016
Author: EDJERE, O ASIBOR, IG BASSEY, U
A Method for Stimulation Candidate Well Selection
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ovuema Augustina
Automobile disk brake pads made from palm kernel shell
Journal: Conference on New Products and Technologies for Small and Medium Enterprises,, 2001
Author: IBHADODE, A.O.A. and OLADEINDE, M.H
Artificial neural network model for cost optimization in a dual-source multi-destination outbound sy ...
Journal: PRODUCTION MANUFACTURING, 2018
Author: Modestus O. Okwu, Benjamin Ufuoma Oreko, Stanley Okiy, Austin C. Uzorh and Onyewuchi Oguoma
Creep function Parameter Analysis for Optimum Design with Calcium Carbonate Carbonate Nanofiller Pol ...
Journal: Journal of Minerals and Materials Characterization and Engineering , 2011
Author: Ihueze, C.C., Mgbemena, C.O., Nnuka, E.E.
Assessment of the Problems Militating Against Tourism Development in Delta State, Nigeria.
Journal: Confluence Journal of Environmental Studies, 2006
Author: Onosemuode, C and Usideme, P.O (2006)
Developments in the Measurement and Estimation Methods for Cement Clinker Quality Parameters
Journal: International Journal of Engineering Research Technology (IJERT), 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Environmental Pollution from Port Harcourt Refinery - A System Approach
Journal: journal of Engineering and Environmental Studies, 2006
Author: Akpoturi P.E
The Design of a Manual Table-Top Grinder,
Journal: Scholars Journal of Engineering and Technology,, 2014
Author: Abdulmalik, I.O., Michael, A., Akonyi, N.S., Mgbemena, C.O., Aaron-Orsu, C.J Ambali, A.O.
Justification for Oil Well Stimulation
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Okotie Sylvester, Ubani C. E., Ikporo Bibobra
A combined algorithm approach to fuel consumption rate analysis and prediction of sea-worthy diesel ...
Journal: Journal of Engineering for The Maritime Environment, 2016
Author: Thaddeus C Nwaoha Garrick Ombor and Modestus O Okwu
A Factorial Study of Accessibility Requirements of Paraplegics in a Built-up Environment
Journal: Journal of Innovative Research in Engineering and Science (JOIRES), 2011
Author: Ashiedu, F. And Igboanugo A. C.
Physico-Chemical and Bacteriological Assessment of Abattoir Effluents and its effect on Agbarho Rive ...
Journal: Nigerian Journal of Applied Science, 2017
Author: Asibor, I., Edjere, O., and Ofejiro, P.
A Critical review of in-situ transesterification process for Biodiesel Production.
Journal: The Pacific Journal of Science and Technology, 2012
Author: Samuel, O.D. and Dairo, O.U.,
Design and Development of a Paraplegic Centricity Mobility Aid
Journal: Journal of Emerging Trend in Engineering and Applied Science (JETEAS) , 2012
Author: Ashiedu Festus and Igboanugo A. C.
Fire extinguishing strength of the combustion product of wood saw dust (ash)
Journal: JASEM, 2014
Author: K. A. IBE, E.E.ELEMIKE, S.A. CHUKWUMA
Seismic Raypath and Wavefront Models in the Lithofacies of the Niger Delta, Nigeria
Journal: British Journal of Applied Science Technology, 2017
Author: G. I. Alaminiokuma
Technical Properties of Some Plant Fibres Compared with Glass Fibre
Journal: International Journal of Engineering Research in Africa, 2010
Author: M. Sumaila, A.O. Akii Ibhadode
Production of Biodiesel from Nigeria Restaurant Waste Cooking Oil using Blender.
Journal: International Journal of Renewable Energy Research, 2013
Author: Samuel, O.D., Waheed, M.A., Bolaji B.O. and O.U. Dairo
Application of Markov Theoretical Model in Predicting Risk Severity and Exposure Levels of Workers i ...
Journal: International Journal of Mechanical Engineering and Applications, 2016
Author: Okwu Modestus Okechukwu Thaddeus C. Nwaoha Ombor Garrick
Cadastral Mapping using GIS Techniques in Urban Development
Journal: The Nigeria Academic Forum, 2006
Author: Onosemuode, Christopher
Using factor Cluster analysis and enrichment methods to evaluate impact of cement production on str ...
Journal: Advances in Applied Science Research, 2011
Author: Ameh, E.G., Kolawole, M.S. and Imeokparia, E.G.
Development of Asbestos-Free Automotive Brake Pad Using Ternary Agro-Waste Fillers
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: Adeyemi, I. Olabisi, Nuhu, A. Ademoh, Thankgod E. Boye
Virtual Remote Control System Using Embedded Systems with Internet of Things
Journal: FUPRE Journal of Scientific and Industrial Research (FJSIR), 2024
Author: Nwachukwu, K., Oyemade, D. A.
Evaluation of a Systematic Approach to Matrix Acidizing on an Oil Producing Well
Journal: International Journal of Research in Engineering and Technology, 2015
Author: Okologume C. Wilfred, Marcus Bourdelon Umeleuma
Effects of breadfruit seed hull ash on the microstructures and properties of AlSiFe alloy/breadfruit ...
Journal: undefined!, 2012
Author: C.U.AtuanyaaA.O.A.Ibhadode.M.Dagwac
Effects of Sodium Hydroxide Concentration on the Physical Properties of Zeolite Produced from Local ...
Journal: European Journal of Scientific Research, 2011
Author: Oghenejoboh, K. M. and Ohimor, E. O.
Predicting Reservoir Behavior using Mathematical Models 2 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters