PUBLICATIONS
The influence of Creep on the Mechanical properties of Calcium Carbonate Nanofiller Reinforced Polyp ...
Journal: Journal of Minerals and Materials Characterization and Engineering. , 2011
Author: Ihueze, C.C., Mgbemena, C.O., Ugwu, S.
ANALYSIS OF COCONUT ETHYL ESTER (BIODIESEL) AND FOSSIL DIESEL BLENDING: PROPERTIES AND CORROSION CHA ...
Journal: Nigerian Journal of Technology, 2016
Author: Samuel, O. D., Ashiedu, F. I., Oreko, B. U
Influence of Thermal cycling on the fatigue resistance of Medium Carbon Steel.
Journal: Open Journal of Advanced Engineering Techniques,, 2013
Author: Orumwense, F.F.O., Agbadua, S.A., Mgbemena, C.O., Ubani, N.O.
Picosecond laser surface micro-texturing for the modification of aerodynamic and dust distribution c ...
Journal: Cogent Engineering , 2016
Author: Omonigho B. Otanocha, Li Lin, Yuanye Zhou, Shan Zhong Liu Zhu
A Comparative Evolutionary Models for Solving Sudoku, Automation, Control and Intelligent Systems
Journal: Automation, Control and Intelligent Systems, 2013
Author: Ojugo, A. A., Oyemade, D., Yoro, R. E., Eboka, A. O. Yerokun, M. O., Ugboh, E.
Enhancing Hydrocarbon recovery using local Alkaline in Niger Delta Reservoir
Journal: Nigerian journal of technology (NIJOTECH), 2017
Author: Akpoturi. P .E and Ofesi S.F
A Classification Model Based on Machine Learning for Detecting Racist Comments on Social Media Platf ...
Journal: Journal of Behavioural Informatics, Digital Humanities and Development Research., 2021
Author: Allenotor, D. Oyemade, D. A.
Design and Development of a Petrol-powered Hammer mill for rural Nigerian Farmers
Journal: Journal of Energy Technologies and Policy, 2014
Author: Adekomaya, S.O., Samuel, O.D
Integrating and Forecasting Power output in Renewable Energy power Plants via Computer Networking
Journal: nternational Journal of Emerging Sciences, 2012
Author: O.D. Samuel, Frank Onaifo, W.O. Igbabini
Removal of Some Heavy Metals from Incinerator Bottom Ash Using Coconut (Cocos Nucifera) Husk
Journal: International Journal of Chemistry, 2016
Author: Doris F. Ogeleka, Harrison E. Avrukpere, Elias E. Elemike, Oghenekohwiroro Edjere, Iwekumo E. Agbozu
Simulation and experimental verification of completely closed cavity die forging on a mechanical pre ...
Journal: Proc. Institution of Mechanical Engineers, 1989
Author: IBHADODE, A.O.A. and DEAN, T.A
IMPLEMENTATION OF A MICROCONTROLLER BASED PURE SINE WAVE INVERTER
Journal: International Journal of Scientific Engineering and Applied Science (IJSEAS), 2017
Author: GODSWILL OFUALAGBA AND CHARLES KEVWE IGBINOBA
A Three Tier Learning Model for Universities in Nigeria
Journal: Journal of Technologies in Society, 2016
Author: Oyemade, D. A., Akpojaro, J., Ojugo, A., Ureigho, R. J., Imouokhome, F. A., Omoregbee, E. U.
Directional Well Trajectory Design : The Theoretical Development of Azimuth Bends and turns in compl ...
Journal: Nigerian journal of technology (NIJOTECH), 2016
Author: P.O Okpozo, Akpoturi Peters, W.C Okologume
Software for Reservoir Performance Prediction
Journal: Onepetrol Journal, 2015
Author: Okotie, Sylvester. and Onyekonwu Mike
Electricity Generation and Distribution in Nigeria: Technical Issues and Solutions.
Journal: International Journal of Engineering Science and Technology, 2011
Author: Chinwuko, E.C., Mgbemena, C.O., Ebhota, S.W Nwuba, E.I.U.
Determination of Optimum Welding Flux Composition Using the Bend Strength Test Technique
Journal: Advanced Materials Research , 1994
Author: Joseph I. Achebo, A.O. Akii Ibhadod
Application of Box Behnken Design for the Optimization of Steam Turbine Efficiency
Journal: World Journal of Engineering Research and Technology (WJERT), 2017
Author: Eyere Emagbetere, Ashiedu Festus Ifeanyi, and Samuel, O. D.
Methods, effect and challenges of Library instruction in academic libraries.
Journal: Library Philosophy and Practice., 2017
Author: Saturday U. Omeluzor, Alarape Asimi Akibu, Sunday Ikhimeakhu Dika and Clement C. Ukangwa
Well Test and PTA for Reservoir Characterization of Key Properties
Journal: American Journal of Engineering and Applied Sciences, 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ogbarode Napoleon Ogbon
DEVELOPMENT OF WATER HYACINTH BRIQUETTING MACHINE
Journal: International Journal of Scientific Research in Information Systems and Engineering (IJSRISE), 2016
Author: Okwu O. Modestus Adeyemi I. Olabisi ThankGod E. Boye Ezurike O. Benjamin
Optimization of coconut oil ethyl esters reaction variables and prediction model of its blends with ...
Journal: http://www.tandfonline.com/loi/tbfu20, 2016
Author: Olusegun David Samuel, Solomon Olanrewaju Giwa Abdulssalam El- Suleiman
Production of Biodiesel from Nigeria Restaurant Waste Cooking Oil using Blender.
Journal: International Journal of Renewable Energy Research, 2013
Author: Samuel, O.D., Waheed, M.A., Bolaji B.O. and O.U. Dairo
Crystal structure of tetraaquabis(3,5-diamino- 4H-1,2,4-triazol-1-ium)cobalt(II) bis[bis(pyridine-2, ...
Journal: Acta Cryst, 2015
Author: Atim Johnson, Justina Mbonu, Zahid Hussain, Wan-Sin Lohe and Hoong-Kun Funf,
Performance of seismic detectors: a case study of the sensitivity of SM-4 geophones used in Nigeria
Journal: International Research Journal of Earth Sciences, 2017
Author: G.I. Alaminiokuma and W.N. Ofuyah
Computerised Design Approach to a Sub-Press Mould for Composite Materials Manufacture
Journal: al: Advanced Materials Research, 1994
Author: Ishaya Musa Dagwa, A.O. Akii Ibhadode
Performance Evaluation of an Indigenous Rotary Power Weeder
Journal: Energy and Environmental Engineering Journal, 2012
Author: Olaoye, J. O. and Samuel, O. D. and Adekanye, T. A
Geostatistical Analysis of well Velocity Data for Enhanced Depth Imaging in the Niger Delta
Journal: Journal of Applied Geology and Geophysics, 2017
Author: G. I. Alaminiokuma and W. N. Ofuyah
Levels of endocrine disrupting organochlorine pesticides in herbal medicines from Bayelsa State, Nig ...
Journal: Toxicology and Environmental Health Sciences, 2024
Author: Tesi, G.O., Felagha, I., Ogbuta, A.A., Ogbomade, W.E., Obodoka, G.C., Iniaghe, P.O. and Kpomah, E.D.
Assessment of Water Suitability for Irrigation in Keffi, Nasarawa State, Nigeria
Journal: International Journal of Sciences, 2016
Author: Onosemuode, C., Ataikiru, T. L. and Oghama, O. E.
THE SECURITY PROVIDER... Social Responsibility and Customer Satisfaction
Journal: Security, 2020
Author: Onakpoma Oboroghenerukohwo
APPLICATION OF DESIGN EXPERT IN THE ANALYSIS OF RESPONSE TRANSFORMATION OF PROCESSES A CASE STUDY O ...
Journal: International Journal of Advanced Research (IJAR), 2017
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora and Eke Akachukwu Ben.
An assessment of rural libraries and information services for rural development: A study of Delta St ...
Journal: The Electronic Library, 2017
Author: Saturday U. Omeluzor, Gloria O. Oyovwe-Tinuoye and Uche Emeka-Ukwu
Assessing mechanical properties of natural fibre reinforced composites for engineering applications ...
Journal: Journal of Minerals and Materials Characterization and Engineering, 2012
Author: Samuel, O.D., Agbo, S. and Adekanye, T.A.
Development of home made crucibles for traditional metal casting
Journal: Journal of the Nigerian Institution of Production Engineers, 1998
Author: IBHADODE, A.O.A.
Isolation and Characterization of Hydrocarbon Utilizing Yeast (HUY) Isolates from Palm Wine
Journal: American Journal of Molecular Biology, 2016
Author: Okerentugba, P.O., Ataikiru, T.L. and Ichor, T.
Predicting Reservoir Behavoiur using Mathematical Model 2: Water underunning.
Journal: Journal of Engineering and Applied Scientific Research, 2015
Author: Akpoturi Peters
Design and Manufacture of a 30-ton Hydraulic Press
Journal: Mechanical Engineering Department, Federal University of Technology , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Cost-Saving and Internally Generated Revenue in Tertiary Educational Institutions: The Role of Cloud ...
Journal: International Journal of Education and Information Technology, 2018
Author: Orobor Anderson Ise, Orobor Helen Elohor
Preliminary Design for Solid Waste Incineration for Power Generation in Benin Metropolis, Nigeria
Journal: ADVANCED MATERIALS RESEARCH -ZUG-, 2013
Author: Igbinomwanhia, D.I. / Ibhadode, O.O. / Akhator, P.E.
DEVELOPMENT OF ERASABLE WHITEBOARD MARKER INKS
Journal: Canadian International Journal of Science and Technology,, 2017
Author: Kindness Uyanga Paul Onaji Modestus O. Okwu.
PERFORMANCE OF AN AUTOMOTIVE BUMPER FROM LALLOH 2 (Corchorustriden L.) PLANT FIBRE REINFORCED EPOXY ...
Journal: Nigerian Journal of Technology, 2016
Author: M. Sumaila and A. O. A. Ibhadode
Barium Sulphate Scaling Prevention
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Obot I., Okotie S.and Dulu A
Application of Sinusoidal Model to a Maintenance Time Series Data.
Journal: Fupre Journal of Scientific and Industrial Research (FJSIR), 2017
Author: Popoola, E, O. and Ashiedu F. I.
Integration and Analysis of Unstructured Data for Decision Making: Text Analytics Approach
Journal: International Journal of Open Information Technologies, 2016
Author: Orobor Anderson Ise
Thermal behavior and UV properties of Organomodified kaolin oleochemically derived from Rubber Seed ...
Journal: Journal of Surface Engineered Materials and Advanced Technology,, 2013
Author: Mgbemena, C.O., Ibekwe, N.O., Mohamed, A.P., Menon, A.R.R. Sukumar, R.
Towards an Enhanced Product Line Engineering Process Model
Journal: Benin Journal of Advances in Computer Science, 2019
Author: Oyemade, D. A, Onibere, E. A.
Determination of the optimum mix of sawdust and coal dust as a fue
Journal: Technical Transactions of the Nigerian Institution of Production Engineers,, 2000
Author: OSARENMWINDA, J.O. and IBHADODE, A.O.A.
The Role of Solid Mineral Mapping for Sustainable Development in Nasarawa State
Journal: M.E Ufuah and R.O. Olomo [ed.] Cartography and GIS for Sustainable Solid Mineral Development in Nigeria. A Publication, 2005
Author: Onosemuode Christopher
A Demonstration of Box Jenkins forecasting typology
Journal: The Nigerian Journal of Engineering Management, 2003
Author: IGBOANUGO, A.C., IBHADODE, A.O.A., and ODIGIE, F