PUBLICATIONS
The use of Remote Sensing Imageries in Monitoring Changes in Surface Water in Lake Chad Drainage Bas ...
Journal: Nigeria Journal of Tropical Geography., 2008
Author: Onosemuode C. Akhimien F. O. and Kundu J..
Thermal behavior and UV properties of Organomodified kaolin oleochemically derived from Rubber Seed ...
Journal: Journal of Surface Engineered Materials and Advanced Technology,, 2013
Author: Mgbemena, C.O., Ibekwe, N.O., Mohamed, A.P., Menon, A.R.R. Sukumar, R.
Problems of Environmental Pollution and Control in the Nigeria Petroleum Industry
Journal: journal of research in Engineering and Environmental Studies, 2006
Author: Akpoturi P.E and Ndukwe J.O
Report on the Evaluation of Ugua J2 and J3 Reservoir Performance.
Journal: American Journal of Engineering and Applied Sciences, 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ovuema Augustina
Optimisation of Alkaline Ethanolysis of Biodiesel Yield from Nigerian Coconut Oil using One Variable ...
Journal: JENRM, 2014
Author: Samuel O.D., Okwu M. O., Oreko U.O., Amosun S. T.
A Study of Land use Change in Warri, Delta State.
Journal: The Built Environment Journal, 2006
Author: Onosemuode, C. Ufuah, M.E. and Ifatimehin, O.O.
Characterization of Kaolin intercalates of Oleochemicals derived from Rubber Seed (Hevea brasiliensi ...
Journal: Journal of King Saud University-Science, 2013
Author: Mgbemena, C.O., Ibekwe, N.O., Mohamed, A.P., Menon, A.R.R. Sukumar, R.
Developments in the Measurement and Estimation Methods for Cement Clinker Quality Parameters
Journal: International Journal of Engineering Research Technology (IJERT), 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Effect of Brain Drain (Human Capital Flight) of Librarians on Service Delivery in Some Selected Nige ...
Journal: SAGE Open, 2014
Author: Clara Chinyere Okoro, Saturday U. Omeluzor and Itunu A. Bamidele
Socio-economic Dynamics of Landuse Pattern: A Case Study of Warri
Journal: Nigeria Journal of Tropical Geography., 2006
Author: Onosemuode Christopher
Empirical Model for Bioethanol Production Process from Corn Stover Using Response Surface Methodolog ...
Journal: International Journal of Emerging Trends in Engineering and Development, 2016
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora, Eke Akachukwu Ben
Water table regime in parts of Obio-Akpor local Government area of Rivers State, Nigeria
Journal: International Research Journal of Earth Sciences, 2017
Author: G. I. Alaminiokuma and W. N. Ofuyah
Effect of cutting fluids on tool wear during turning operations
Journal: Technical Transactions of the Nigerian Society of Engineers, 1999
Author: MUSA, M. and IBHADODE, A.O.A
Bioethanol production from corn stover using Saccharomyces cerevisiae
Journal: International Journal of Scientific Engineering Research, 2016
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora, Eke Akachukwu Ben and Nsidibe-Obong Ekpe Moses
Environmental Impact Of Mining On Agricultural Activities: A Case Study Of Bukuru, Jos.
Journal: International Journal Of Sustainable Development., 2010
Author: Onosemuode C. Akhimien F. O
Determination of Optimum Manufacturing Conditions for Asbestos-free Brake Pad using Taguchi Method
Journal: Nigerian Journal of Engineering Research and Development, 2006
Author: Dagwa, Ishaya - Ibhadode, A.O.Akii
Directional Well Trajectory Design : The Theoretical Development of Azimuth Bends and turns in compl ...
Journal: Nigerian journal of technology (NIJOTECH), 2016
Author: P.O Okpozo, Akpoturi Peters, W.C Okologume
Modelling prevention and reduction methods of ship propeller cavitation under uncertainty, Ships and ...
Journal: Ships and Offshore Structures, 2017
Author: 1. Thaddeus C. Nwaoha, Sidum Adumene and ThankGod E. Boye
Development of FeOTiO2-SiO2-CaCO3 System as a Welding Flux
Journal: Nigerian Journal of Engineering Research and Development, 2004
Author: Oyawale F.A. and Ibhadode A.O.A
The Effect of Billet Location on Completely Closed Cavity Die Forging
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
Modified Screw Jack for Lifting Operation in Industrial Setting
Journal: International Journal of Engineering and Technologies, 2017
Author: Benjamin Ezurike, Modestus O. Okwu
Manufacture of metal-arc welding electrodes from locally available materials
Journal: Journal of the Nigerian Institution of Production Engineer, 1993
Author: OKOH, I.G. and IBHADODE, A.O.A
Organophosphate pesticides in herbal mixtures from Bayelsa State, Nigeria: implication for human exp ...
Journal: Journal of Environmental Exposure Assessment, 2025
Author: Tesi, G.O., Lari, B., Ogbuta, A.A., Felagha, I., Obodoka, G.C., Ogbomade, W.E., Okpara, K.E., Osioma, E. and Agbozu, I.E
The Use of Geoinformatics in Landscape Development Control: A Case Study of Temidire Estate in Ogbom ...
Journal: Ekpoma Journal of Social Sciences. , 2015
Author: Onosemuode C. Akhimien and Ayankanmi A. J
Synthesis of Silver Nanoparticles using Some Alcoholic Beverages from Nigeria Market
Journal: Int J Nano Mat Sci, 2013
Author: Adesuji Elijah Temitope, Elemike Elias Emeka, Chuku Aleruchi, Labulo Ayomide Hassan,Owoseni Mojisola Christiana, Oseghal
A HIGHER ODER POLYNOMIAL FOR OPTIMAL PRICING AND REPLENISHMENT STRATEGIES FOR A RETAIL/DISTRIBUTION ...
Journal: International Journal of Scientific Engineering and Applied Science (IJSEAS), 2015
Author: A. M. Okedoye,P PPh.D
Integrating Remote Sensing and GIS for Environmental Management
Journal: The Built Environment Journal, 2005
Author: Ufuah M.E, and Onosemuode C
Performance Evaluation of the Predictive Models for Free Fatty Acid Content and Biodiesel Yield from ...
Journal: International Journal of Engineering Research Technology (IJERT), 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Some physical and mechanical properties of asbestosfree experimental brake pad
Journal: JOURNAL OF RAW MATERIALS RESEARCH , 2006
Author: I M. Dagwa, A. O. A. Ibhadode
High Power Picosecond Laser Surface Micro-texturing of H13 Tool Steel and Pattern Replication onto A ...
Journal: Lasers in Manufacturing and Materials Processing, 2016
Author: Otanocha, O.B., Li, L., Zhong, S. and Liu, Z
Design and Manufacture of Automobile Disk Brake Pad Test Rig
Journal: Nigerian Journal of Engineering Research and Development, 2005
Author: Dagwa, Ishaya - Ibhadode, A.O.Akii
Gas Lift a tool to Production Optimization
Journal: International Journal of Oil, Gas and Coal Engineering, 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ovuema Augustina
Development of a Reflectance Photoplethysmogram Based Heart Rate Monitoring Device
Journal: International Journal of Medical Imaging, 2017
Author: Kingsley Okeoghene Enalume, Ayebatonye Marttyns Epemu
Predicting Reservoir Behavior using Mathematical Models 1 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
Performance Evaluation of Polydimethylsiloxane-Solvent Blends as Defoamer for Crude Oil Foam
Journal: International Conference on Engineering for a Sustainable World(ICESW), 2018
Author: Ohimor Evuensiri Onoghwarite, Erude Abraham Okeoghene, Onocha Ovonomo, Oreko Benjamin Ufuoma and Ononiwu Prosper Ikechuk
Solving For Computational Intelligence the Timetable-Problem
Journal: , Advances in Multidisciplinary Research Journal, 2016
Author: Ojugo, A. A., Oyemade, D. A., Allenotor, D.
The Design of a Linear Quadratic Optimal Regulator for Transient Heat flow in Continuous Casting of ...
Journal: International Journal of Current Research, 2016
Author: Obinabo E. C. Izelu C. O. Nwaoha T. C. and Ashiedu F. I.
Performance evaluation of a prototype two component cutting force lathe dynamometer
Journal: journal and technology research, 2016
Author: A.O.Akii Ibhadode
Comparative Stochastic Study for Credit-Card Fraud Detection Models
Journal: IEEE African Journal of Computing ICT, 2015
Author: Ojugo, A. A., Oyemade, D. A., Allenotor, D., Longe, O. E., Anujeonye, C.
Report on the Evaluation of Ugua J2 and J3 Reservoir Performance
Journal: American Journal of Engineering and Applied Sciences, 2015
Author: 1 Okotie Sylvester, 2 Ikporo Bibobra and 3 Ovuema Augustina
DETERMINATION OF NI(II) CRYSTAL STRUCTURE BY POWDER X-RAY DIFFRACTION
Journal: Scientia Africana, 2015
Author: J. I. Mbonu
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: IJETAE , 2013
Author: C.O Izelu, Eze S.C, B.U. Oreko and Edward B.A.
A Method for Stimulation Candidate Well Selection
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ovuema Augustina
Markov Chain Analysis for Inbreeding and their Genetic Effects.
Journal: International Journal of Numerical Mathematics., 2009
Author: Olaruwanju S.O, Onosemuode C. and Zubair M.A
EFFECT OF LEMON JUICE ON THE KINECTICS OF FERMENTATION OF PALM WINE
Journal: Asian J Sci Tech, 2012
Author: A. S. Ekop, N. D. Eyop and E. E.Elemike
2014: Heavy Metal Contamination and Distribution in Soils around Pb-Zn mines of Abakaliki district, ...
Journal: Frontiers in Geosciences, 2014
Author: Onyeobi, T.U.S. and Imeokparia, E.G.,
Small and Meduim Scale Enterprises- Catalyst for National Development in Nigeria
Journal: Journal of Scientific and Industrial Studies, 2007
Author: Akpoturi P.E
Microbial Community Structure of an Oil Polluted Site In Effurun, Nigeria.
Journal: International Research Journal of Public and Environmental Health , 2017
Author: Ataikiru, T. L., Okorhi-Damisa, B. F. and J. I. Akpaiboh
ACCIDENT CAUSATIVE MODEL IN THE OIL AND GAS CONURBATION USING MARKOV CHAIN
Journal: International Journal of Scientific Research in Information Systems and Engineering , 2016
Author: Okwu, Modestus.O. Thaddeus Nwaoha Adeyemi, I. Olabisi and Ezurike Benjamin. O.
Existence and uniqueness, and asymptotic stability analysis of solution of a retarded equation model ...
Journal: icastor Journal of Mathematical Sciences, 2010
Author: Igobi, D. K. and Egwurube, M. and Musa, Samuel and Oyemade, D. A.