PUBLICATIONS
Numerical Investigation of Thermo-Mechanical Behaviour of Ball Grid Array Solder Joint at High Tempe ...
Journal: ADVANCED MATERIALS RESEARCH -ZUG-, 2012
Author: Amalu, E.H. / Ekere, N.N. / Bhatti, R.S. / Mallik, S. / Takyi, G. / Ibhadode, A.O.A.
Problems of Environmental Pollution and Control in the Nigeria Petroleum Industry
Journal: journal of research in Engineering and Environmental Studies, 2006
Author: Akpoturi P.E and Ndukwe J.O
The Effect of using mastery learning approach on academic achievement of Senior Secondary school II ...
Journal: Elixir Edu. Tech, 2012
Author: Achufusi, N.N. Mgbemena, C.O.
Assessment of total petroleum hydrocarbons contents in water and soil samples from power station dis ...
Journal: Journal of Applied Science, 2016
Author: Edjere, O., Asibor, G. and Bassey, U.
A Machine Learning Model for the Classification of Human Emotions
Journal: International Journal of Computer Sciences and Engineering , 2024
Author: D. A. Oyemade, D. F. Seregbe
APPLICATION OF DESIGN EXPERT IN THE ANALYSIS OF RESPONSE TRANSFORMATION OF PROCESSES A CASE STUDY O ...
Journal: International Journal of Advanced Research (IJAR), 2017
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora and Eke Akachukwu Ben.
Application of Geographical Information System (GIS) for Spatial Decision Support in Eco-Tourism Dev ...
Journal: Environmental Research Journal, 2010
Author: Onosemuode C. and Dare O.T. (2010)
Design and Manufacture of a 30-ton Hydraulic Press
Journal: Mechanical Engineering Department, Federal University of Technology , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Total Hydrocarbon Content in water and sediment samples from coastal region of Nigeria
Journal: journal ofEngineering Science and Technology, 2010
Author: Otitigbe F and Akpoturi P.E
Manufacture of hand hacksaw blades form locally available mild stee
Journal: The Nigerian Engineer, 1991
Author: IBHADODE, A.O.A. and OJEAH, C.C
Barium Sulphate Scaling Prevention
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Obot I., Okotie S.and Dulu A
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
Well Test and PTA for Reservoir Characterization of Key Properties
Journal: American Journal of Engineering and Applied Sciences, 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ogbarode Napoleon Ogbon
Directional Well Trajectory Design : The Theoretical Development of Azimuth Bends and turns in compl ...
Journal: Nigerian journal of technology (NIJOTECH), 2016
Author: P.O Okpozo, Akpoturi Peters, W.C Okologume
A Factorial Study of Accessibility Requirements of Paraplegics in a Built-up Environment
Journal: Journal of Innovative Research in Engineering and Science (JOIRES), 2011
Author: Ashiedu, F. And Igboanugo A. C.
Computerised Design Approach to a Sub-Press Mould for Composite Materials Manufacture
Journal: al: Advanced Materials Research, 1994
Author: Ishaya Musa Dagwa, A.O. Akii Ibhadode
Feature Oriented Performance Analysis of the Social Media
Journal: International Journal of Innovative Science, Engineering Technology, 2022
Author: Oyemade, D. A. ,Allenotor, D.
Computer-Simulated Delta () For Vertical Transversely Isotropic (VTI) Media in Two Depobelts of the ...
Journal: The International Journal Of Engineering And Science, 2014
Author: Emudianughe, E. J , Alaminiokuma, G. I. and Ojugo, A. A
Remedation of Crude Oil-Polluted Surface Water Using Aqua-gel Bentonite, Periwinkle Shell Chitosin E ...
Journal: Journal of Ecology and Environment, 2016
Author: Okafor, W.C., Menkiti, M., Okafor, I., Ohimor, E., Onocha, O., Oreko, B., and Sheidu, S.
Hyperelastic modelling and limit stress prediction of a P195/55 R16 85H Radial tire developed from N ...
Journal: American Journal of Material Sciences and Applications., 2014
Author: Ihueze, C.C, Mgbemena, C.O.
Synthesis, crystal structure, electrochemical and anti-corrosion studies of Schiff base derived from ...
Journal: Molecular structure, 2017
Author: Elias E. Elemike, Damian C. Onwudiwe, Henry U. Nwankwo, Eric C. Hosten
Gas Lift a tool to Production Optimization
Journal: International Journal of Oil, Gas and Coal Engineering, 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ovuema Augustina
Characterization and Creep Behaviour of Polypropylene/Calcium Carbonate Nanocomposites.
Journal: Journal of Applied Sciences Research, , 2010
Author: Mgbemena, C.O., Mgbemena, C.E., Ubani, N.O.
Physico-Chemical and Bacteriological Assessment of Abattoir Effluents and its effect on Agbarho Rive ...
Journal: Nigerian Journal of Applied Science, 2017
Author: Asibor, I., Edjere, O., and Ofejiro, P.
Compositional, Geotechnical and Industrial Characteristics of Some Clay Bodies in Southern Nigeria
Journal: Jour. of Geography and Geology, 2013
Author: Onyeobi T.U.S Imeokparia, E.G. Ilegieuno O.A and Egbuniwe I.G
UNSTEADY MHD MIXED CONVECTION FLOW PAST AN OSCILLATING PLATE WITH HEAT SOURCE/SINK
Journal: Journal of Naval Architecture and Marine Engineering, 2014
Author: A. M. Okedoye
Corner filling characteristics in precision forging
Journal: International Journal of Machine Tools and Manufacture , 1988
Author: A.O.A. Ibhadode,T.A.Dean
The geochemistry and depositional characteristics of Maastrichtan shales from southwest Nigeria.
Journal: Jour. of Min. Geology, , 2007
Author: Imeokparia, E.G., and Onyeobi, T.U.S
Towards an Enhanced Product Line Engineering Process Model
Journal: Benin Journal of Advances in Computer Science, 2019
Author: Oyemade, D. A, Onibere, E. A.
Lateral Rock Property Prediction by Post Stack Acoustic Impedance Inversion: A Case Study from Offsh ...
Journal: International Journal of Sciences: Basic and Applied Research, 2016
Author: Difference Odeyovwi Ogagarue, Godswill Igoni Alaminiokuma
Influence of Thermal cycling on the fatigue resistance of Medium Carbon Steel.
Journal: Open Journal of Advanced Engineering Techniques,, 2013
Author: Orumwense, F.F.O., Agbadua, S.A., Mgbemena, C.O., Ubani, N.O.
Performance Evaluation of a Pilot Paraplegic Centricity Mobility Aid
Journal: Nigeria Journal of Technology (NIJOTECH), 2016
Author: Ashiedu F. I., Popoola E. O., and Akpan E. E.
Towards a Software Cost Reduction Model
Journal: Benin Journal of Advances in Computer Science, 2018
Author: Oyemade, D. A, Onibere, E. A.
Picosecond laser surface micro-texturing for the modification of aerodynamic and dust distribution c ...
Journal: Cogent Engineering , 2016
Author: Omonigho B. Otanocha, Li Lin, Yuanye Zhou, Shan Zhong Liu Zhu
Optimizing the Output Current for a DC-DC Converter
Journal: Journal of Control Theory and Informatics, International Institute for Science, Technology and Education, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles and Onyan Aaron Okiemute
Responsive Production Systems and Roles that Robots can Play
Journal: Advanced Materials Research, 2009
Author: R.H. Weston , Edited by : Prof. A.O. Akii Ibhadode, A.I. Igbafe and B.U. Anyata
Assessment of the Social and Environmental Impacts of Keffi-Lafia Federal Highway.
Journal: International Journal of Physical Science. , 2011
Author: Onosemuode, C and Akwa, L
KINETIC MODELING FOR REMOVAL OF Pb, Cd, Ni, and Cr ions FROM PETROCHEMICAL EFFLUENT USING TERMITE SO ...
Journal: International Journal of Sciences, 2016
Author: I. E. Agbozu and U. Bassey
Distribution of Phthalate Esters in Underground Water from Power Transmission Sites in Warri Metropo ...
Journal: Journal of Applied Sciences and Environmental Management, 2016
Author: Edjere, O., Asibor, I.G. and Bassey, U.
A stochastic model for face detection
Journal: Advances in Multidisciplinary and Scientific Research Journal, 2016
Author: A.A. Ojugo., D.A. Oyemade., D. Allenotor
Integrating Remote Sensing and GIS for Environmental Management
Journal: The Built Environment Journal, 2005
Author: Ufuah M.E, and Onosemuode C
Performance Evaluation of an Indigenous Rotary Power Weeder
Journal: Energy and Environmental Engineering Journal, 2012
Author: Olaoye, J. O. and Samuel, O. D. and Adekanye, T. A
Environmental Impact Of Mining On Agricultural Activities: A Case Study Of Bukuru, Jos.
Journal: International Journal Of Sustainable Development., 2010
Author: Onosemuode C. Akhimien F. O
Design, production and performance testing of two component cutting force dynamometer
Journal: Journal of the Nigerian Institution of Production Engineers, 1998
Author: DAGWA, I.M. and IBHADODE, A.O.A.
Optimization of coconut oil ethyl esters reaction variables and prediction model of its blends with ...
Journal: http://www.tandfonline.com/loi/tbfu20, 2016
Author: Olusegun David Samuel, Solomon Olanrewaju Giwa Abdulssalam El- Suleiman
ONLINE MONITORING OF SOFT SENSOR PERFORMANCE: A CASE STUDY OF CEMENT CLINKER QUALITY PARAMETERS SOFT ...
Journal: IJRET: International Journal of Research in Engineering and Technology, 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Design and Manufacture of a 30-ton Hydraulic Press
Journal: A U J.T. 14(3): 196-200 (Jan. 2011) Technical Report , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Facilitating Hazard Analysis of LNG Carrier Operations via Risk Matrix Approach
Journal: International Journal of Science and Technology, 2016
Author: Thaddeus C. Nwaoha Jasper Agbakwuru Modestus O. Okwu
Biosynthesis, Electrochemical,Antimicrobial and Antioxidant Studies of Silver Nanoparticles Mediated ...
Journal: J Clust Sci, 2017
Author: Elias E. Elemike, Damian C. Onwudiwe,Omolola E. Fayemi, Anthony C. Ekennia, Eno E. Ebenso Louwrens R. Tiedt
Critical Stress Analysis of a Formula One Racing Car Wishbone Suspension System
Journal: International Journal of Engineering and Manufacturing Science (IJEMS), 2016
Author: ThankGod Enatimi Boye and Chinedum Ogonna Mgbemena