PUBLICATIONS
pH Level Activity in Crude oil Contaminated Soil Bio remediated with natural sources
Journal: journal of Engineering and Applied Scientific Research, 2014
Author: Akpoturi P.E
Facilitating Hazard Analysis of LNG Carrier Operations via Risk Matrix Approach
Journal: International Journal of Science and Technology, 2016
Author: Thaddeus C. Nwaoha Jasper Agbakwuru Modestus O. Okwu
Engine Spare Parts Production through Copy Manufacture and Substitution Approach
Journal: Advanced Materials Research, 1994
Author: E.H. Amalu, A.O. Akii Ibhadode
Work-Trips Generation in Warri and Environs: A Spatial Perspective
Journal: Journal of Environmental Studies, 2007
Author: Onosemuode, C and Onosemuode, K. E . .
Use of inequalities in the determination of control systems compensation parameters
Journal: Advances in Modeling Analysis C. AMSE Press, 1993
Author: IBHADODE, A.O.A
Report on the Evaluation of Ugua J2 and J3 Reservoir Performance
Journal: American Journal of Engineering and Applied Sciences, 2015
Author: 1 Okotie Sylvester, 2 Ikporo Bibobra and 3 Ovuema Augustina
Material Requirement Planning of MISO Production Process using Transfer Function: A Case Study of So ...
Journal: Journal of the Nigeria Association of Mathematical Physics. , 2016
Author: S. Okiy, B.U. Oreko and C.C. Nwobi-Okoye
Design and Manufacture of a 30-ton Hydraulic Press
Journal: A U J.T. 14(3): 196-200 (Jan. 2011) Technical Report , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Critical Stress Analysis of a Formula One Racing Car Wishbone Suspension System
Journal: International Journal of Engineering and Manufacturing Science (IJEMS), 2016
Author: ThankGod Enatimi Boye and Chinedum Ogonna Mgbemena
An Investigation of Predictability of Traders Profitability Using Deep Learning
Journal: American Journal of Computer Science and Technology, 2024
Author: David Ademola Oyemade, Eseoghene Ben-Iwhiwhu
The Design of a Manual Table-Top Grinder,
Journal: Scholars Journal of Engineering and Technology,, 2014
Author: Abdulmalik, I.O., Michael, A., Akonyi, N.S., Mgbemena, C.O., Aaron-Orsu, C.J Ambali, A.O.
Predicting Reservoir Behavior using Mathematical Models 2 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
Stochastic Analysis of the Effect of Asset Prices to a Single Economic Investor
Journal: Bulletin of Mathematical Sciences and Applications, 2016
Author: E. Ekuma-Okereke, J. T. Eghwerido, E. Efe-Eyefia, S. Zelibe
Environmental Pollution from Port Harcourt Refinery - A System Approach
Journal: journal of Engineering and Environmental Studies, 2006
Author: Akpoturi P.E
Effect of Turning Parameters on Metal Removal and Tool Wear Rates of AISI 1018 Low Carbon Steel.
Journal: Nigerian Journal of Technology,, 2016
Author: Mgbemena, C.O., Mgbemena, C.E., Ashiedu, F.I. Etebenumeh, G. O.
Effects of Sodium Hydroxide Concentration on the Physical Properties of Zeolite Produced from Local ...
Journal: European Journal of Scientific Research, 2011
Author: Oghenejoboh, K. M. and Ohimor, E. O.
Revolution and Challenges Associated with Developing Countries Power Sector: A Case Study of the Nig ...
Journal: Journal of Engineering Science Application (JESA), 2016
Author: E. I. Okhueleigbe, A. O. Okhueleigbe, J. A. Ogbekhiulu, D. Okene, C. U. Ogu, A. O. ONYAN
On a Method for Die Container Design in Completely Closed Die Forging
Journal: TRANSACTIONS- AMERICAN SOCIETY OF MECHANICAL ENGINEERS JOURNAL OF MECHANICAL DESIGN, 1997
Author: Ibhadode, A. O. A.
Optimisation Of Alkaline Ethanolysis Of Biodiesel Yield From Nigerian Coconut Oil Using One Variable ...
Journal: JENRM, 2014
Author: Samuel, O.D, Okwu, M.O., Oreko B. and Amosun S.T
Design and Manufacture of Manual Electrode Coating Machine for Small Scale Manufacture
Journal: Nigerian Journal of Engineering Research and Development, 2004
Author: Oyawale F. A. and Ibhadode A. O. A
Predicting Reservoir Behavior using Mathematical Models 3 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
Modelling prevention and reduction methods of ship propeller cavitation under uncertainty, Ships and ...
Journal: Ships and Offshore Structures, 2017
Author: 1. Thaddeus C. Nwaoha, Sidum Adumene and ThankGod E. Boye
ONLINE MONITORING OF SOFT SENSOR PERFORMANCE: A CASE STUDY OF CEMENT CLINKER QUALITY PARAMETERS SOFT ...
Journal: IJRET: International Journal of Research in Engineering and Technology, 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Corner filling characteristics in precision forging
Journal: International Journal of Machine Tools and Manufacture , 1988
Author: A.O.A. Ibhadode,T.A.Dean
The Role of Remote Sensing and Geographic Information System (GIS) in Forest Reserve Management and ...
Journal: The Nigeria Journal of Research and Production, 2006
Author: Onosemuode Christopher
Economic Evaluation of Electrical Submersible Pump (ESP) and Gas Lift Well For Production Optimizati ...
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Ezekiel Chuks., Okotie Sylvester.and Dulu Appah
Improved Correlation for Predicting Stock Tank Gas-Oil Ratio in Niger Delta
Journal: Onepetrol Journal, 2016
Author: Hilary Okeke. and Okotie Sylvester
Optimal Reliability and Cost of Power Distribution: A case of Power Holding Company of Nigeria.
Journal: International Journal of Engineering Science and Technology, , 2011
Author: Chinwuko, E.C., Nwuba, E.I.U., Mgbemena, C.O.
Evaluation of heavy metal pollutant from soils at Municipal Waste Dump in parts of Lagos metropolis ...
Journal: Nig. Jour. Applied Science, 2009
Author: Imeokparia, E.G. Onyeobi, T.U.S and Nwanchi Des. A.E.
Engineering Design Criteria for Wheelchair: AHP approach
Journal: Journal of Sustainable Technology (JoST), 2015
Author: Nwaoha T. C. and Ashiedu F. I.
Optimal transesterification duration for biodiesel produced from waste frying oil
Journal: British Journal of Renewable Energy,, 2015
Author: Samuel, O.D., Amosun, S.T. and Boye, T.E.
The effect of die expansion in precision forging
Journal: Journal of the Nigerian Institution of Production Engineers, , 1994
Author: IBHADODE, A.O.A
Assessment of total petroleum hydrocarbons contents in water and soil samples from power station dis ...
Journal: Journal of Applied Science, 2016
Author: Edjere, O., Asibor, G. and Bassey, U.
An Alternative Algorithm and R Programming Implementation for Least Absolute Deviation Estimator of ...
Journal: Journal of Modern Applied Statistical Methods , 2016
Author: Ogundele Suraju Olaniyi, J. I. Mbegbu and C. R. Nwosu
Strategies 1: Enhancing Environmenatally Conscious Engineering safety Practices in Nigeria
Journal: journal of Engineering Studies, 2005
Author: Akpoturi P.E
Effects of breadfruit seed hull ash on the microstructures and properties of AlSiFe alloy/breadfruit ...
Journal: undefined!, 2012
Author: ites Author links open overlay panelC.U.AtuanyaaA.O.A.Ibhadode.M.Dagwa
Determination of Optimum Welding Flux Composition Using the Bend Strength Test Technique
Journal: Advanced Materials Research , 1994
Author: Joseph I. Achebo, A.O. Akii Ibhadod
Effect of Brain Drain (Human Capital Flight) of Librarians on Service Delivery in Some Selected Nige ...
Journal: SAGE Open, 2014
Author: Clara Chinyere Okoro, Saturday U. Omeluzor and Itunu A. Bamidele
Development and Assessment of Composite Brake Pad Using Pulverized Cocoa Beans Shells Filler
Journal: International Journal of Materials Science and Applications, 2016
Author: Adeyemi Ibukun Olabisi., Ademoh Nuhu. Adam, Okwu Modestus Okechukwu,
OPTIMIZATION OF INVESTMENT RETURNS WITH N-STEP UTILITY FUNCTIONS
Journal: Journal of Nigerian Mathematical Society, 2014
Author: J. T. EGHWERIDO1 AND T. O. OBILADE
Using EF, PLI AND IGEO for the assessment of heavy metal pollution and sediment quality of Asejire R ...
Journal: International Journal of Environment and Pollution Research, 2015
Author: Asibor, I. G., Edjere, O., Adeniyi, F. and Ogundele, O.
Performance characteristics and analysis of tailored Natural Rubber/Organo-kaolin Composites
Journal: International Journal of Plastics Technology, 2016
Author: Mgbemena, C.O., Ihueze, C.C. Menon, A.R.R.
Computerised Design Approach to a Sub-Press Mould for Composite Materials Manufacture
Journal: al: Advanced Materials Research, 1994
Author: Ishaya Musa Dagwa, A.O. Akii Ibhadode
A Three Tier Learning Model for Universities in Nigeria
Journal: Journal of Technologies in Society, 2016
Author: Oyemade, D. A., Akpojaro, J., Ojugo, A., Ureigho, R. J., Imouokhome, F. A., Omoregbee, E. U.
REMEDIATION OF CRUDE OIL-POLLUTED SURFACE WATER USING AQUA-GEL BENTONITE, PERIWINKLE SHELL CHITOSAN ...
Journal: Journal of Global Ecology and Environment , 2016
Author: Okafor Winston Churchill, Menkiti Matthew, Okafor Ijeoma, Ohimor Evuensiri, Onocha Ovonomo, Oreko Benjamin And Sheidu Su
Near-surface structural model for enhanced seismic data acquisition and processing in North-Central ...
Journal: AMERICAN JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH, 2012
Author: G. I. Alaminiokuma and J. Amonieah
Geospatial Assessment Of Vulnerable Areas To Flood Hazard and Risk Along Ikpoba River, Benin Edo S ...
Journal: The Nigerian Journal of Cartography and GIS. , 2014
Author: Onosemuode C. and Ovririe E
Delineating the Proper Shooting Medium for Seismic Reflection Survey in the Greater Ughelli Depobelt ...
Journal: Geophysics Remote Sensing, 2014
Author: Alaminiokuma, G. I. and Emudianughe, J. E.
Gas Lift Technique a Tool to Production Optimization
Journal: International Journal of Oil, Gas and Coal Engineering, 2015
Author: Okotie Sylvester 1 , Ikporo Bibobra 2 , Ovuema Augustina 1
Advances in materials and systems technologies
Journal: Advanced materials research, 2007
Author: A O Ibhadode