PUBLICATIONS
Work Flow for Reservoir Study and Challenges
Journal: Onepetrol Journal, 2015
Author: Okotie Sylvester. and Stanley Buduka. and Ikporo Bibobra
Performance Evaluation of Multicast Protocols
Journal: SAU Science-Tech Journal, 2017
Author: Akpojaro, J., Omogbhemhe, M., Oyemade, D. A.
Hydrocarbon Degradation Potentials of Indigeneous Fungal Isolates from a Petroleum Hydrocarbon Conta ...
Journal: Global Advanced Research Journal of Environmental Science and Toxicology, 2014
Author: Iheanacho, C. C., Okerentugba, P. O., Orji, F. A. and Ataikiru, T. L.
Numerical Investigation of Thermo-Mechanical Behaviour of Ball Grid Array Solder Joint at High Tempe ...
Journal: al: Advanced Materials Research , 1994
Author: E.H. Amalu, N.N. Ekere, R.S. Bhatti, S. Mallik, G. Takyi, A.O. Akii Ibhadode
Carbon Nanotubes: The Building Blocks of Nanotechnology Development
Journal: J.Nanotech. Prog. Int. , 2016
Author: Boye E. T., Achadu J.O., Oreko B.U., Samuel O.D.
The Assessment of Baseline Ecological Data for Environmental Management: A Case study of the Coasta ...
Journal: The Nigeria Academic Forum, 2004
Author: Onosemuode Christopher
Antimicrobial activity and Chemical Composition of the flowers of Aspilia africana
Journal: Advances in Life Science and Technology, 2014
Author: Salit Bako, Sherah, Emmanuel Usman Onche, Idongesit Justina Mbonu, Paul Ngbede Olotu and Labumi Lajide.
KINETIC MODELING FOR REMOVAL OF Pb, Cd, Ni, and Cr ions FROM PETROCHEMICAL EFFLUENT USING TERMITE SO ...
Journal: International Journal of Sciences, 2016
Author: I. E. Agbozu and U. Bassey
Directional Well Trajectory Design : The Theoretical Development of Azimuth Bends and turns in compl ...
Journal: Nigerian journal of technology (NIJOTECH), 2016
Author: P.O Okpozo, Akpoturi Peters, W.C Okologume
PERFORMANCE OF AN AUTOMOTIVE BUMPER FROM LALLOH 2 (Corchorustriden L.) PLANT FIBRE REINFORCED EPOXY ...
Journal: Nigerian Journal of Technology, 2016
Author: M. Sumaila and A. O. A. Ibhadode
Preliminary Study on Antimicrobial Activity of Friendly Bacteria Isolated from Dairy Products
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2015
Author: Okorhi-Damisa, F. B. and Ataikiru, T. L.
Developments in the Measurement and Estimation Methods for Cement Clinker Quality Parameters
Journal: International Journal of Engineering Research Technology (IJERT), 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
EFFECT OF LEMON JUICE ON THE KINECTICS OF FERMENTATION OF PALM WINE
Journal: Asian J Sci Tech, 2012
Author: A. S. Ekop, N. D. Eyop and E. E.Elemike
The Design of a Manual Table-Top Grinder,
Journal: Scholars Journal of Engineering and Technology,, 2014
Author: Abdulmalik, I.O., Michael, A., Akonyi, N.S., Mgbemena, C.O., Aaron-Orsu, C.J Ambali, A.O.
Computational Modeling of Extracellular Matrix Protein Stamping on Hard Substrates for Biomedical Mi ...
Journal: Advances in Life Science and Technology, , 2014
Author: Aduloju, S.C., Nima, R., Mgbemena, C.O., Soboyejo, W.O.
ENERGY- CONTENT AND SPECTRAL ANALYSES OF SHOTS FOR OPTIMUM SEISMOGRAM GENERATION IN THE NIGER DELTA
Journal: International Journal of Geology, Earth Environmental Sciences, 2014
Author: Alaminiokuma G.I. and Emudianughe J.E.
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: International Journal of Machine Tools and Manufacture, 2004
Author: P.E. Amiolemhen, A.O.A. Ibhadode
Design and Manufacture of a 30-ton Hydraulic Press
Journal: Mechanical Engineering Department, Federal University of Technology , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Hydrocarbon Biodegradation and Antibiotic Sensitivity of Microorganisms isolated from an oil pollute ...
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2020
Author: Ataikiru T.L, Okorhi F.B and Onyegbunwa A.E
THE SECURITY PROVIDER... Social Responsibility and Customer Satisfaction
Journal: Security, 2020
Author: Onakpoma Oboroghenerukohwo
Productivity Pattern of Warri Refining and Petrochemicals Limited A principal Component Analysis App ...
Journal: International Journal of Development Research, 2016
Author: Ashiedu F. I. and Izelu C. O.
Advances in materials and systems technologies
Journal: Advanced materials research, 2007
Author: A O Ibhadode
Characteristics of Some River Bed Sands and their Suitability for Making Colourless Glass
Journal: Ideal Journal of Engineering and Applied Science, 2016
Author: Edjere, O., Okpidi, T.J.I.
The effect of die container compounding on product accuracy in completely closed cavity die forging
Journal: Manufacturing Engineering Society International Conference, Calatayud, Spain, 2005
Author: IBHADODE, A.O.A. and AIBANGBEE, G.F
Geochemistry and Environmetric Approaches to Estimating Pollution Impacts on soils around Okaba Coa ...
Journal: Brit. Jour of Applied Science and Technology, 2014
Author: Ameh, E.G. Imasuen, I.O. and Imeokparia, E.G
Creep function Parameter Analysis for Optimum Design with Calcium Carbonate Carbonate Nanofiller Pol ...
Journal: Journal of Minerals and Materials Characterization and Engineering , 2011
Author: Ihueze, C.C., Mgbemena, C.O., Nnuka, E.E.
Experimental Study on a Line-Axis Concentrating Solar Energy Collector for Water Heating
Journal: Industrial Engineering, 2017
Author: Frederick Ikpakwu, Anthony Okoronkwo, Modestus Okwu, Emmanuel Anyanwu
Lateral Rock Property Prediction by Post Stack Acoustic Impedance Inversion: A Case Study from Offsh ...
Journal: International Journal of Sciences: Basic and Applied Research, 2016
Author: Difference Odeyovwi Ogagarue, Godswill Igoni Alaminiokuma
Seismic Refraction Data Analyses: A Software for Low Velocity Layer Interpretation in the Niger Delt ...
Journal: Petroleum Technology Development Journal, 2017
Author: G. I. Alaminiokuma and T. Warmate
Utilization of Nigerian precious Resource in the Niger Delta Region for the benefit of the Ecosystem ...
Journal: International Journal of Engineering and Technology (IJET), 2014
Author: Okotie Sylvester and Ikporo Bibobra
Advances in materials and systems technologies III
Journal: Advanced materials research, 2012
Author: Prof. A.O. Akii Ibhadode
Economic Evaluation of Electrical Submersible Pump (ESP) and Gas Lift Well For Production Optimizati ...
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Ezekiel Chuks., Okotie Sylvester.and Dulu Appah
Delineating the Proper Shooting Medium for Seismic Reflection Survey in the Greater Ughelli Depobelt ...
Journal: Geophysics Remote Sensing, 2014
Author: Alaminiokuma, G. I. and Emudianughe, J. E.
Effect of chloride Ion in buffer medium on the liquid-liquid extraction of Cu(II) and Ni(II) using ...
Journal: International Journal of Solvent Extraction and Ion Exchange, 2005
Author: Uzokwu, B.A. and Mbonu, I. J.
Evaluation of a Systematic Approach to Matrix Acidizing on an Oil Producing Well
Journal: International Journal of Research in Engineering and Technology, 2015
Author: Okologume C. Wilfred, Marcus Bourdelon Umeleuma
Nigeria Natural Gas Supply Preference and the Environment
Journal: Journal of Energy Technologies and Policy, 2014
Author: Wilfred Chinedu Okologume
Pivot Hole Thickness Optimization and Material Design for Functional Requirement of Front Axle Suppo ...
Journal: American Journal of Materials Science and Application , 2014
Author: Aduloju, S.C., Mgbemena, C.O., Maduike, J. Abdurahman, J.
Application of Linear Programming Model and Sensitivity Analysis in Multi Source Multi Destination S ...
Journal: Canadian International Journal of Science and Technology, Ontario Canada, 2017
Author: M. O.Okwu, F.I Ashiedu, Joachim Gidiagba, and A. Adedoyin
Reservoir Management Practice, Key to Optimum recovery
Journal: Multi- Disciplinary Engineering journal of Research Development, 2008
Author: Akpoturi P.E and Otitigbe F
Seismic Raypath and Wavefront Models in the Lithofacies of the Niger Delta, Nigeria
Journal: British Journal of Applied Science Technology, 2017
Author: G. I. Alaminiokuma
A Comparative Study of Regression Analysis and Artificial Neural Network Methods for Medium-Term Loa ...
Journal: Indian Journal of Science and Technology, 2017
Author: Isaac A. Samuel Adetiba Emmanuel Ishioma A. Odigwe and Firstlady C. Felly-Njoku
Development of useful products from agro-waste and polythene bags
Journal: Conference on New Products and Technologies for Small and Medium Enterprises,, 2001
Author: IBHADODE, A.O.A
Performance Evaluation of Polydimethylsiloxane-Solvent Blends as Defoamer for Crude Oil Foam
Journal: International Conference on Engineering for a Sustainable World(ICESW), 2018
Author: Ohimor Evuensiri Onoghwarite, Erude Abraham Okeoghene, Onocha Ovonomo, Oreko Benjamin Ufuoma and Ononiwu Prosper Ikechuk
Road Traffic Accident in Nasarawa State: Case study of Road Safety, Keffi Unit Command
Journal: The Nasara Journal of Humanities., 2005
Author: Onosemuode Christopher
Design and Development of a Paraplegic Centricity Mobility Aid
Journal: Journal of Emerging Trend in Engineering and Applied Science (JETEAS) , 2012
Author: Ashiedu Festus and Igboanugo A. C.
Investigations into the Applications of Ergonomics Principles in the Design of School Furniture in N ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences, 2013
Author: Ashiedu F. I. and Amiebenomon, S. O.
Punch and Counterpunch Design by the Die Expansion Method in Completely Closed Die Forging
Journal: MATERIALS SCIENCE FORUM, 2006
Author: Ibhadode, A. O. A.
Development of FeOTiO2-SiO2-CaCO3 System as a Welding Flux
Journal: Nigerian Journal of Engineering Research and Development, 2004
Author: Oyawale F.A. and Ibhadode A.O.A
Empirical Method to Predict the Performance of Human Powered Mono Hull Boats
Journal: International Journal of Engineering and Technologies, 2016
Author: Pereowei G. Ombor, Agbakwuru Jasper, Modestus O. Okwu,
Near-surface structural model for enhanced seismic data acquisition and processing in North-Central ...
Journal: AMERICAN JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH, 2012
Author: G. I. Alaminiokuma and J. Amonieah