PUBLICATIONS
The Use of Geoinformatics in Site Selection for Suitable Landfill for Poultry Waste: A Case Study of ...
Journal: International Journal of Sciences, 2016
Author: Onosemuode C. and Abodurin W.A
Cadastral Maps and Squatter (Slum) Settlement Development in Urban Growth.
Journal: Indian Journal of Multidisciplinary Research,, 2007
Author: Onosemuode, C and Gambo, I. D
Impact of Cartography on the Development of Tourism Business in Nigeria
Journal: Ofobruku S. A and Onosemuode C (ed) Tourism and Hospitality Business in Nigeria., 2014
Author: Onosemuode, Christopher
Gas Lift Technique a Tool to Production Optimization
Journal: International Journal of Oil, Gas and Coal Engineering, 2015
Author: Okotie Sylvester 1 , Ikporo Bibobra 2 , Ovuema Augustina 1
Responsive Production Systems and Roles that Robots can Play
Journal: Advanced Materials Research, 2009
Author: R.H. Weston , Edited by : Prof. A.O. Akii Ibhadode, A.I. Igbafe and B.U. Anyata
Water table regime in parts of Obio-Akpor local Government area of Rivers State, Nigeria
Journal: International Research Journal of Earth Sciences, 2017
Author: G. I. Alaminiokuma and W. N. Ofuyah
Analysis of Coconut Ethyl Esther (Biodiesel) and Fossil Diesel Blending Properties and Corrosion Cha ...
Journal: Nigerian Journal of Technology (NIJOTECH), 2016
Author: Samuel O. D., Ashiedu F. I. and Oreko B. U.
Application of Geographical Information System (GIS) for Spatial Decision Support in Eco-Tourism Dev ...
Journal: Environmental Research Journal, 2010
Author: Onosemuode C. and Dare O.T. (2010)
A Validation Method of Computational Fluid Dynamics (CFD) Simulation against Experimental Data of Tr ...
Journal: American Journal of Engineering Research (AJER) , 2017
Author: Boye, Thankgod, Nwaoha, T. C., Samuel, O. D and Ashiedu, F. I.
On the Issue of Dualism in Cartography
Journal: Anyigba Journal of Arts and Humanities, 2004
Author: Ufuah M.E, Onosemuode C
Developments in the Measurement and Estimation Methods for Cement Clinker Quality Parameters
Journal: International Journal of Engineering Research Technology (IJERT), 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in Industry, Vol 33, Iss 1, Pp 11-17 (2011), 2011
Author: A. C. Igboanugo / A. O. A. Ibhadode / C. U. Atuanya
DESIGN AND DEVELOPMENT OF A LOW-COST WASHING MACHINE SUITABLE FOR POLYTHENE MATERIALS
Journal: Asian Journal of Current Research, 2017
Author: EMAGBETERE EYERE, ADEYEMI I. OLABISI AND OGHENEKOWHO P. ARUOTURE1
Phytochemical screening, antioxidant and antimicrobial activities of Acalypha ciliata plant
Journal: Clinical phytoscience, 2016
Author: Oluwakayode Odeja, Christiana Ene Ogwuche, Elias Emeka Elemike and Grace Obi
Development and Assessment of Composite Brake Pad Using Pulverized Cocoa Beans Shells Filler
Journal: International Journal of Materials Science and Applications, 2016
Author: Adeyemi Ibukun Olabisi Ademoh Nuhu. Adam Okwu Modestus Okechukwu
A Three Tier Learning Model for Universities in Nigeria
Journal: Journal of Technologies in Society, 2016
Author: Oyemade, D. A., Akpojaro, J., Ojugo, A., Ureigho, R. J., Imouokhome, F. A., Omoregbee, E. U.
Modelling of Multiphase Flow Metering for Crude Oil Production Monitoring
Journal: International Journal of Current Engineering and Technology, 2015
Author: Ego C. Obukohwo, Okologume C. Wilfred, Dulu Appah and Marcus B. Umeleuma
Improved Correlation for Predicting Stock Tank Gas-Oil Ratio in Niger Delta
Journal: Onepetrol Journal, 2016
Author: Hilary Okeke. and Okotie Sylvester
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
Assessment of Water Suitability for Irrigation in Keffi, Nasarawa State, Nigeria
Journal: International Journal of Sciences, 2016
Author: Onosemuode C, Ataikiru T. L, Osayomwanbor E. O
Static Analysis of a P195/55 R16 85H Radial Tire Developed from Natural rubber/Tea Seed Oil (Camelli ...
Journal: American Journal of Mechanical Engineering and Automation,, 2014
Author: Ihueze, C.C Mgbemena, C.O.
Delineation of Soil Corrosivity Regimes Along Petroleum Pipeline Routes in the Geomorphic Zones of t ...
Journal: Petroleum Technology Development Journal, 2016
Author: Alaminiokuma, G. I., Osokpor, J., Emudianughe, J. E. and Warmate, T.
The Design of a Linear Quadratic Optimal Regulator for Transient Heat flow in Continuous Casting of ...
Journal: International Journal of Current Research, 2016
Author: Obinabo E. C. Izelu C. O. Nwaoha T. C. and Ashiedu F. I.
Estimation of Pressure Drop, Liquid Holdup and Flow Pattern in a Two Phase Vertical Flow
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Omon E., Dulu A. and Okotie S.
Computational Modeling of Extracellular Matrix Protein Stamping on Hard Substrates for Biomedical Mi ...
Journal: Advances in Life Science and Technology, , 2014
Author: Aduloju, S.C., Nima, R., Mgbemena, C.O., Soboyejo, W.O.
Contextualization of Entrepreneurial Education in Production Engineering Discipline
Journal: Journal of Emerging Trends in Education and Policy Studies (JETERAPS) , 2011
Author: Igboanugo Anthony C. and Ashiedu Festus
The Use of Geoinformatics Techniques in Site Selection for solid Waste Dump A Case Study of Warri an ...
Journal: International Journal of Science and Research (IJSR), 2017
Author: Christopher Onosemuode and Omorogbe Osemwegie
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in industry, 2011
Author: C.U. ATUANYA, A.O.A. IBHADODE, A.C. IGBOANUGO
ONLINE MONITORING OF SOFT SENSOR PERFORMANCE: A CASE STUDY OF CEMENT CLINKER QUALITY PARAMETERS SOFT ...
Journal: IJRET: International Journal of Research in Engineering and Technology, 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Fuzzy Based System for Power Consumption Prediction
Journal: Journal of Engineering Science and Computing, , 2017
Author: EMAGBETERE, Eyere, BOYE, E. ThankGod, OGHENEVWAIRE, S. Iyabo
Numerical Investigation of Thermo-Mechanical Behaviour of Ball Grid Array Solder Joint at High Tempe ...
Journal: ADVANCED MATERIALS RESEARCH -ZUG-, 2012
Author: Amalu, E.H. / Ekere, N.N. / Bhatti, R.S. / Mallik, S. / Takyi, G. / Ibhadode, A.O.A.
Procedure for calculating shear rate in the reservoir in Niger Delta
Journal: Journal or Engineering and Energy Research, 2014
Author: Akpoturi Peters
Determination of Thermal Properties of Rock Samples Using Modified Thermal Block Method
Journal: Open access e-Journal, 2012
Author: Olukayode D. Akinyemi, Yemi S. Onifade, Biodun S. Badmus and O.S. Awokola
Assessing the adoption and use of integrated library systems (ILS) for library service provision in ...
Journal: Library Review, 2016
Author: Saturday U. Omeluzor and Gloria O. Oyovwe-Tinuoye
A combined algorithm approach to fuel consumption rate analysis and prediction of sea-worthy diesel ...
Journal: Journal of Engineering for The Maritime Environment, 2016
Author: Thaddeus C Nwaoha Garrick Ombor and Modestus O Okwu
High Power Picosecond Laser Surface Micro-texturing of H13 Tool Steel and Pattern Replication onto A ...
Journal: Lasers in Manufacturing and Materials Processing, 2016
Author: Otanocha, O.B., Li, L., Zhong, S. and Liu, Z
Modelling and optimization of surface roughness and machining induced vibration 41Cr4 alloy structu ...
Journal: The International Journal Of Engineering And Science (IJES), 2016
Author: Izelu, C.O., Eze, S.C. and Samuel, Olusegun David
Predicting Crude Oil Sales in NNPC Mega Station Awka, Anambra State, Nigeria.
Journal: Journal of Scientific and Engineering Research., 2016
Author: Umeozokwere, A.O., Oreko B.U., Offor I.C., Udoye, B.O.
On the realization of the Equilibrium State of FluidBorne Marine Vessels
Journal: International Journal of Science and Technology (IJST) , 2016
Author: Obinabo E. C., Nwaoha T. C. and Ashiedu F. I.
The use of SPOT Remotely Sensed Data in Monitoring Environmental Changes in Warri Metropolis
Journal: The Nigeria Journal of Research and Production, 2004
Author: Onosemuode Christopher
Finite Element Analysis and Design Validation of High Pressure Gate Valve for a Typical Nigerian Oil ...
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: ThankGod E. Boye, Thaddeus C. Nwaoha, Adeyemi I. Olabisi
APPLICATION OF CASSAVA PEELS ACTIVATED CARBON IN THE TREATMENT OF OIL REFINERY WASTEWATER A COMPARA ...
Journal: Journal of Ecological Engineering, 2016
Author: Kigho Moses Oghenejoboh, Smith Orode Otuagoma, Evuensiri Onogwharite Ohimor
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in industry, 2011
Author: C.U. ATUANYA, A.O.A. IBHADODE, A.C. IGBOANUGO
Automated Student Attendance Management System Using Face Recognition
Journal: International Journal of Educational Research and Information Science, 2018
Author: Ofualagba Godswill, Omijie Osas, Orobor Anderson, Ibhadode Oseikhuemen, Odiete Etse
The Spatial Assessment of Wastes Collection Points Using GIS Approach.
Journal: The Nigerian Journal of Cartography and GIS., 2013
Author: Onosemuode C. Ajayi O. Ayodele and Esemedade J. U
Investigations into the Applications of Ergonomics Principles in the Design of School Furniture in N ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences, 2013
Author: Ashiedu F. I. and Amiebenomon, S. O.
2D static failure prediction for critical stresses of an automobile tire sidewall using MATLAB PDETo ...
Journal: IOSR-Journal of Mechanical Civil Engineering,, 2014
Author: Ihueze, C.C., Mgbemena, C.O., Menon, A.R.R.
Advances in materials and systems technologies IV : selected, peer reviewed papers from the 4th Inte ...
Journal: Advanced materials research, 2013
Author: Ibhadode, A. O. Akii / Aluyor, E.O.
Directional Well Trajectory Design : The Theoretical Development of Azimuth Bends and turns in compl ...
Journal: Nigerian journal of technology (NIJOTECH), 2016
Author: P.O Okpozo, Akpoturi Peters, W.C Okologume
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: International Journal of Machine Tools and Manufacture, 2004
Author: P.E. Amiolemhen, A.O.A. Ibhadode