PUBLICATIONS
Design and Manufacture of a 30-ton Hydraulic Press
Journal: Mechanical Engineering Department, Federal University of Technology , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Effects of breadfruit seed hull ash on the microstructures and properties of AlSiFe alloy/breadfruit ...
Journal: Elsevier Science Direct- Results in Physics, 2012
Author: lC.U.Atuanya A.O.A.Ibhadode.M.Dagwa
The Role of Remote Sensing and Geographic Information System (GIS) in Forest Reserve Management and ...
Journal: The Nigeria Journal of Research and Production, 2006
Author: Onosemuode Christopher
Trace Determination of Phthalates in ground water Sample by GC-MS using specific sample concentratio ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences, 2016
Author: Edjere, O., Pollard, P., and Maier, U.
Determination of Thermal Properties of Rock Samples Using Modified Thermal Block Method
Journal: Open access e-Journal, 2012
Author: Olukayode D. Akinyemi, Yemi S. Onifade, Biodun S. Badmus and O.S. Awokola
On a Method for Die Container Design in Completely Closed Die Forging
Journal: TRANSACTIONS- AMERICAN SOCIETY OF MECHANICAL ENGINEERS JOURNAL OF MECHANICAL DESIGN, 1997
Author: Ibhadode, A. O. A.
ACCIDENT CAUSATIVE MODEL IN THE OIL AND GAS CONURBATION USING MARKOV CHAIN
Journal: International Journal of Scientific Research in Information Systems and Engineering , 2016
Author: Okwu, Modestus.O. Thaddeus Nwaoha Adeyemi, I. Olabisi and Ezurike Benjamin. O.
Empirical Model for Bioethanol Production Process from Corn Stover Using Response Surface Methodolog ...
Journal: International Journal of Emerging Trends in Engineering and Development, 2016
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora, Eke Akachukwu Ben
A HIGHER ODER POLYNOMIAL FOR OPTIMAL PRICING AND REPLENISHMENT STRATEGIES FOR A RETAIL/DISTRIBUTION ...
Journal: International Journal of Scientific Engineering and Applied Science (IJSEAS), 2015
Author: A. M. Okedoye,P PPh.D
A Comparative Evolutionary Models for Solving Sudoku, Automation, Control and Intelligent Systems
Journal: Automation, Control and Intelligent Systems, 2013
Author: Ojugo, A. A., Oyemade, D., Yoro, R. E., Eboka, A. O. Yerokun, M. O., Ugboh, E.
Measurements and Evaluation of Anthropometric Data of Nigerian Adult Paraplegics for Wheelchair Desi ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences (JETEAS) , 2013
Author: Ashiedu, F. I. and Igboanugo A. C.
Modified Screw Jack for Lifting Operation in Industrial Setting
Journal: International Journal of Engineering and Technologies, 2017
Author: Benjamin Ezurike, Modestus O. Okwu
Remedation of Crude Oil-Polluted Surface Water Using Aqua-gel Bentonite, Periwinkle Shell Chitosin E ...
Journal: Journal of Ecology and Environment, 2016
Author: Okafor, W.C., Menkiti, M., Okafor, I., Ohimor, E., Onocha, O., Oreko, B., and Sheidu, S.
Design and Development of an Integrated Small-Scale Oil Palm Fruit Processing Mill
Journal: Advanced Materials Research, 1994
Author: C.O. Ilechie, A.O. Akii Ibhadode, B.O. Abikoye
Application of Linear Programming Model and Sensitivity Analysis in Multi Source Multi Destination S ...
Journal: Canadian International Journal of Science and Technology, Ontario Canada, 2017
Author: M. O.Okwu, F.I Ashiedu, Joachim Gidiagba, and A. Adedoyin
Development of a Reflectance Photoplethysmogram Based Heart Rate Monitoring Device
Journal: International Journal of Medical Imaging, 2017
Author: Kingsley Okeoghene Enalume, Ayebatonye Marttyns Epemu
A Basic Approach To Designing Embedded Systems Using a Simple Calculator and C Programming Language
Journal: Nigerian Journal of Technology, 2014
Author: F. Tanshi, N. Bello
NUMERICAL MODELLING OF CURRENT ON WAVE DRIFT LOAD OF A SHIP SHAPED OFFSHORE STRUCTURES (CASE STUDY - ...
Journal: IJRDO-Journal of Mechanical And Civil Engineering, 2017
Author: Abam, Tamunopekere Joshua, Agbakwuru, Jasper Ahamefulal, Adeyemi, I. Olabisi
Design of a PV-Connected DC-DC Converter
Journal: International Journal of Emerging trends in Engineering and Development, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Cytotoxicity of Ag, Au and Ag-Au bimetallic nanoparticles prepared using golden rod (Solidago canade ...
Journal: Scientific reports, 2019
Author: Tarryn L. Botha, Elias E. Elemike, Suranie Horn, Damian C. onwudiwe, John P. Giesy Victor Wepener
A Demonstration of Box Jenkins forecasting typology
Journal: The Nigerian Journal of Engineering Management, 2003
Author: IGBOANUGO, A.C., IBHADODE, A.O.A., and ODIGIE, F
Delineation of Soil Corrosivity Regimes Along Petroleum Pipeline Routes in the Geomorphic Zones of t ...
Journal: Petroleum Technology Development Journal, 2016
Author: Alaminiokuma, G. I., Osokpor, J., Emudianughe, J. E. and Warmate, T.
Solar Hydrogen Fuel Cell Technology, Principle, Applications and Market
Journal: Journal of Energy Technologies and Policy, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles, ONYAN AARON OKIEMUTE
Directional Well Trajectory Design : The Theoretical Development of Azimuth Bends and turns in compl ...
Journal: Nigerian journal of technology (NIJOTECH), 2016
Author: P.O Okpozo, Akpoturi Peters, W.C Okologume
Effects of Turning Parameters on Metal Removal and Tool Wear Rates for Low Carbon Steel
Journal: Nigerian Journal of Technology (NIJOTECH), 2016
Author: Mgbemena C.O Mgbemena C.E, Etebenumeh G, and Ashiedu F. I.
Antimicrobial activity of chemical bioactive compounds from the chloroform extract of the aerial par ...
Journal: International Journal of Biological and Chemical Sciences, 2016
Author: Christiana Ene OGWUCHE and Oghenekohwiroro EDJERE
Integrating Remote Sensing and GIS for Environmental Management
Journal: The Built Environment Journal, 2005
Author: Ufuah M.E, and Onosemuode C
PERFORMANCE OF AN AUTOMOTIVE BUMPER FROM LALLOH 2 (Corchorustriden L.) PLANT FIBRE REINFORCED EPOXY ...
Journal: Nigerian Journal of Technology (NIJOTECH), 2016
Author: M Sumaila, AOA Ibhadod
Biosynthesis, Electrochemical,Antimicrobial and Antioxidant Studies of Silver Nanoparticles Mediated ...
Journal: J Clust Sci, 2017
Author: Elias E. Elemike, Damian C. Onwudiwe,Omolola E. Fayemi, Anthony C. Ekennia, Eno E. Ebenso Louwrens R. Tiedt
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in industry, 2011
Author: C.U. ATUANYA, A.O.A. IBHADODE, A.C. IGBOANUGO
Pivot Hole Thickness Optimization and Material Design for Functional Requirement of Front Axle Suppo ...
Journal: American Journal of Materials Science and Application , 2014
Author: Aduloju, S.C., Mgbemena, C.O., Maduike, J. Abdurahman, J.
Investigation of plume dynamics during picosecond laser ablation of H13 steel using high-speed digit ...
Journal: Applied Physics A, 2017
Author: Krste Pangovski, Omonigho B. Otanocha, Shan Zhong, Martin Sparkes, Zhu Liu, William ONeill, Lin Li
Optimisation of Alkaline Ethanolysis of Biodiesel Yield from Nigerian Coconut Oil using One Variable ...
Journal: Journal of Energy and Natural Resource Management, 2014
Author: Samuel O.D., Okwu M. O., Oreko U.O., Amosun S. T.
Electricity Generation and Distribution in Nigeria: Technical Issues and Solutions.
Journal: International Journal of Engineering Science and Technology, 2011
Author: Chinwuko, E.C., Mgbemena, C.O., Ebhota, S.W Nwuba, E.I.U.
Assessment of the Impacts of Industrialization in Esan Land, Edo State, Nigeria
Journal: Continental Journal of Environmental Design and Management , 2012
Author: Akhimien F.O, Onosemuode C and Ibhadode C
Effects of Process Variables on the Fermentation of Corn Stover: A Review
Journal: Journal of Scientific and Engineering Research, 2016
Author: Ohimor E. Onoghwarite, Ndirika V.I. Obiora, Eke A. Ben
Adsorption and desorption performances of Eichhornia crassipes (water hyacinth) roots and leaves pow ...
Journal: Ovidius University Annals of Chemistry, 2025
Author: Tesi, G.O., Ejeromedoghene, O., Alli, Y.A., Okunoja, H.B. and Ipeaiyeda, A.R.
Estimation of pressdie system stiffness in mechanical press forging
Journal: Journal of the Nigerian Institution of Production Engineers, 1994
Author: IBHADODE, A.O.A. and DEAN, T.A
Communication: An Instrument for Wealth Creation
Journal: African Journal Of Arts And Cultural Studies , 2009
Author: Otanocha, B. Omonigho and Nkwor, Chimezie Agbafor
Cadastral Mapping using GIS Techniques in Urban Development
Journal: The Nigeria Academic Forum, 2006
Author: Onosemuode, Christopher
CARBON NANOTUBES: A REVIEW OF THE CURRENT STATE-OF-THE-ART MATERIAL SCIENCE AND TECHNOLOGY TOWARDS A ...
Journal: Int J Cur Res Rev , 2015
Author: Boye T.E., Oyekale J.O., Arivie G.O.
Optimal transesterification duration for biodiesel produced from waste frying oil
Journal: British Journal of Renewable Energy,, 2015
Author: Samuel, O.D., Amosun, S.T. and Boye, T.E.
Development and Evaluation of Maize Husks (Asbestos-free) Based Brake Pad
Journal: Industrial Engineering Letters, 2015
Author: Nuhu A. Ademoh and Adeyemi, I. Olabisi.
A Regression Analysis Approach to Queueing System Modelling: A Case of Banks.
Journal: Journal of Applied Sciences Research,, 2011
Author: Mgbemena, C.E., Mgbemena, C.O., Chinwuko, C.E.
Petrological and Geochemical Characteristics of some Mesozoic granitic rocks hosting Sn-Nb-W-U miner ...
Journal: Petrogenesis and Minealization of Ganitoids Science Press, Beijing, China, 1992
Author: Imeokparia, E.G.
Compositional, Geotechnical and Industrial Characteristics of Some Clay Bodies in Southern Nigeria
Journal: Jour. of Geography and Geology, 2013
Author: Onyeobi T.U.S Imeokparia, E.G. Ilegieuno O.A and Egbuniwe I.G
Predicting Diffusion Dynamics Of The Coronavirus In Nigeria Through Ties-Strength Threshold On A Cas ...
Journal: Technology Reports of Kansai University, 2020
Author: . Ojugo, A. A., Oyemade, D. A.
Carbon Nanotubes: The Building Blocks of Nanotechnology Development
Journal: J.Nanotech. Prog. Int. , 2016
Author: Boye E. T., Achadu J.O., Oreko B.U., Samuel O.D.
Engine Spare Parts Production through Copy Manufacture and Substitution Approach
Journal: Advanced Materials Research, 1994
Author: E.H. Amalu, A.O. Akii Ibhadode
The Impact of 3D Printing Technology to the Nigerian Manufacturing GDP
Journal: Modern Mechanical Engineering, 2018
Author: A. Balogun, V. , B. Otanocha, O. and O. Ibhadode, A.