PUBLICATIONS
APPLICATION OF CASSAVA PEELS ACTIVATED CARBON IN THE TREATMENT OF OIL REFINERY WASTEWATER A COMPARA ...
Journal: Journal of Ecological Engineering, 2016
Author: Kigho Moses Oghenejoboh, Smith Orode Otuagoma, Evuensiri Onogwharite Ohimor
The Effects of Wood Ash on Ignition Point of Wood
Journal: World Academy of Science, Engineering and Technology, 2015
Author: Kenneth A. Ibe, Justina I. Mbonu, Godgift K. Umukoro
A combined algorithm approach to fuel consumption rate analysis and prediction of sea-worthy diesel ...
Journal: Journal of Engineering for the Maritime Environment, 2016
Author: Thaddeus C Nwaoha Garrick Ombor and Modestus O Okwu
Environmental Impact Of Mining On Agricultural Activities: A Case Study Of Bukuru, Jos.
Journal: International Journal Of Sustainable Development., 2010
Author: Onosemuode C. Akhimien F. O
Experiences and Lessons Learnt From Embedding Sustainability in Engineering
Journal: World Congress on Engineering Education, 2015
Author: Otanocha, O.B., Tomkinson, B., Dobson, H., Cummings, C., Sanchez-Romaguera, V. and Tomkinson, R.
Effect of cutting fluids on tool wear during turning operations
Journal: Technical Transactions of the Nigerian Society of Engineers, 1999
Author: MUSA, M. and IBHADODE, A.O.A
Design and Manufacture of a 30-ton Hydraulic Press
Journal: Mechanical Engineering Department, Federal University of Technology , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Analysis of soot in Rain waters around Warri Metropolis.
Journal: International Journal of Scientific Development and Research - IJSDR, 2020
Author: Okorhi-Damisa B.F, Ogunkeyede A.O, Akpejuluh P. and Okechukwu L. (
Rare-earth and other element mobility accompanying Albitization and mineralization in the Odegi gra ...
Journal: African Jour. Science and Technology, 1996
Author: Imeokparia, E.G.
Problems of Environmental Pollution and Control in the Nigeria Petroleum Industry
Journal: journal of research in Engineering and Environmental Studies, 2006
Author: Akpoturi P.E and Ndukwe J.O
Impact of PCBs from Transmission Oil Discharges: A Case Study of Power Distribution Installations in ...
Journal: Nigerian Journal of Applied Science, 2016
Author: Edjere, O., Asibor, G. and Otolo, S.
Manufacture of hand hacksaw blades form locally available mild stee
Journal: The Nigerian Engineer, 1991
Author: IBHADODE, A.O.A. and OJEAH, C.C
Hybrid Neural Network Models for Rainfall Runoffs: Comparative study
Journal: Advancement in Scientific and Engineering Research, 2013
Author: Ojugo, A. A., Abere, R., Eboka, A.O., Yerokun, M. O, Yoro, R. E., Onochie, C. C. and Oyemade, D.
Trace Determination of Phthalates in ground water Sample by GC-MS using specific sample concentratio ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences, 2016
Author: Edjere, O., Pollard, P., and Maier, U.
Development and Assessment of Composite Brake Pad Using Pulverized Cocoa Beans Shells Filler
Journal: International Journal of Materials Science and Applications, 2016
Author: Adeyemi Ibukun Olabisi Ademoh Nuhu. Adam Okwu Modestus Okechukwu
Automated Student Attendance Management System Using Face Recognition
Journal: International Journal of Educational Research and Information Science, 2018
Author: Ofualagba Godswill, Omijie Osas, Orobor Anderson, Ibhadode Oseikhuemen, Odiete Etse
Design and Development of a Paraplegic Centricity Mobility Aid
Journal: Journal of Emerging Trend in Engineering and Applied Science (JETEAS) , 2012
Author: Ashiedu Festus and Igboanugo A. C.
Development of Asbestos-Free Friction Lining Material from Palm Kernel Shell
Journal: Journal of the Brazilian Society of Mechanical Sciences, 2008
Author: A. O. A. Ibhadode, I. M. Dagwa
Remedation of Crude Oil-Polluted Surface Water Using Aqua-gel Bentonite, Periwinkle Shell Chitosin E ...
Journal: Journal of Ecology and Environment, 2016
Author: Okafor, W.C., Menkiti, M., Okafor, I., Ohimor, E., Onocha, O., Oreko, B., and Sheidu, S.
Design and Development of an Integrated Small-Scale Oil Palm Fruit Processing Mill
Journal: Advanced Materials Research, 1994
Author: C.O. Ilechie, A.O. Akii Ibhadode, B.O. Abikoye
Impact of Cartography on the Development of Tourism Business in Nigeria
Journal: Ofobruku S. A and Onosemuode C (ed) Tourism and Hospitality Business in Nigeria., 2014
Author: Onosemuode, Christopher
A Cost-Based Approach for Analysing the Overheads of Multicast Protocols in Non-Strictly Hierarchica ...
Journal: International Journal of Communication Networks and Information Security (IJCNIS), 2011
Author: Akpojaro, J., Aigbe, P., Oyemade, D
Technical Properties of Some Plant Fibres Compared with Glass Fibre
Journal: International Journal of Engineering Research in Africa, 2010
Author: M. Sumaila, A.O. Akii Ibhadode
The Evaluation of Domestic Energy need and Consumption Pattern in Kokona Local Government Area, Nasa ...
Journal: Journal of Environmental Studies., 2007
Author: Onosemuode, C and Onosemuode, S.A
Modeling and Optimization of Hard Turning Operations on 41Cr4 Alloy Steel using Response Surface Met ...
Journal: International Journal of Mechanical Engineering and Applications (IJMEA), 2016
Author: Izelu C. O., Ezeh S. C. and Ashiedu F. I.
Report on the Evaluation of Ugua J2 and J3 Reservoir Performance.
Journal: American Journal of Engineering and Applied Sciences, 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ovuema Augustina
Introduction to Manufacturing Technology
Journal: Open Journal of Energy Efficiency, 2013
Author: Mala Abba-Aji, Vincent Ogwagwu, Bukar Umar Musa, Prof. A.O. Akii Ibhadode (Contributor)
A Multivariate linear Regression Theoretic Approach to Modelling Road Traffic Accidents in Nigeria.
Journal: Journal of the Nigeria Association of Mathematical Physics., 2016
Author: B.U. Oreko, S. Okiy, C.C. Nwobi-Okoye and A.C Igboanugo
Delineation of Soil Corrosivity Regimes Along Petroleum Pipeline Routes in the Geomorphic Zones of t ...
Journal: Petroleum Technology Development Journal, 2016
Author: Alaminiokuma, G. I., Osokpor, J., Emudianughe, J. E. and Warmate, T.
Sequestering of Fe and Pb ions from Wastewater by Canarium schweinfurthii after carbonization and ch ...
Journal: J. Appl. Sci. Environ. Manage., 2016
Author: BASSEY UWEM, EDJERE OGHENEKOHWIRORO, OTOLO SOLOMON EBIYE
Levels of endocrine disrupting organochlorine pesticides in herbal medicines from Bayelsa State, Nig ...
Journal: Toxicology and Environmental Health Sciences, 2024
Author: Tesi, G.O., Felagha, I., Ogbuta, A.A., Ogbomade, W.E., Obodoka, G.C., Iniaghe, P.O. and Kpomah, E.D.
Characterization of Kaolin intercalates of Oleochemicals derived from Rubber Seed (Hevea brasiliensi ...
Journal: Journal of King Saud University-Science, 2013
Author: Mgbemena, C.O., Ibekwe, N.O., Mohamed, A.P., Menon, A.R.R. Sukumar, R.
Some physical and mechanical properties of asbestosfree experimental brake pad
Journal: JOURNAL OF RAW MATERIALS RESEARCH , 2006
Author: I M. Dagwa, A. O. A. Ibhadode
Socio-economic Dynamics of Landuse Pattern: A Case Study of Warri
Journal: Nigeria Journal of Tropical Geography., 2006
Author: Onosemuode Christopher
Advances in materials and systems technologies IV : selected, peer reviewed papers from the 4th Inte ...
Journal: Advanced materials research, 2013
Author: Ibhadode, A. O. Akii / Aluyor, E.O.
Predicting Crude Oil Sales in NNPC Mega Station Awka, Anambra State, Nigeria.
Journal: Journal of Scientific and Engineering Research., 2016
Author: Umeozokwere, A.O., Oreko B.U., Offor I.C., Udoye, B.O.
Anthropometric survey of Nigeria adult working class
Journal: Nigerian Journal of Engineering Management, 2002
Author: IGBOANUGO, A.C., EGHAREVBA, F, and IBHADODE A.O.A
Thermal stability of pulverized palm kernel shell (PKS) based friction lining material locally deve ...
Journal: ChemXpress , 2014
Author: Mgbemena, C.O., Mgbemena, C.E. Okwu, M.O.
Utilization of cellulosic cassava waste for bio-ethanol production
Journal: JECE, 2015
Author: Elias E.Elemike, Ojiefoh C.Oseghale, Anthony C.Okoye
Development of FeOTiO2-SiO2-CaCO3 System as a Welding Flux
Journal: Nigerian Journal of Engineering Research and Development, 2004
Author: Oyawale F.A. and Ibhadode A.O.A
Advances in materials and systems technologies III
Journal: Advanced materials research, 2012
Author: Prof. A.O. Akii Ibhadode
Investigating the Calibration Curves for a Two Component Cutting Tool Lathe Dynamometer Using Finite ...
Journal: International Journal of Engineering Research in Africa, 2010
Author: Osezua Obehi Ibhadode, Ishaya Musa Dagwa, Akii Okonigbon Akhaehomen Ibhadode
Analysis of Coconut Ethyl Esther (Biodiesel) and Fossil Diesel Blending Properties and Corrosion Cha ...
Journal: Nigerian Journal of Technology (NIJOTECH), 2016
Author: Samuel O. D., Ashiedu F. I. and Oreko B. U.
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in industry, 2011
Author: C.U. ATUANYA, A.O.A. IBHADODE, A.C. IGBOANUGO
Assessing mechanical properties of natural fibre reinforced composites for engineering applications ...
Journal: Journal of Minerals and Materials Characterization and Engineering, 2012
Author: Samuel, O.D., Agbo, S. and Adekanye, T.A.
Removal of Some Heavy Metals from Incinerator Bottom Ash Using Coconut (Cocos Nucifera) Husk
Journal: International Journal of Chemistry, 2016
Author: Doris F. Ogeleka, Harrison E. Avrukpere, Elias E. Elemike, Oghenekohwiroro Edjere, Iwekumo E. Agbozu
Design, production and performance testing of two component cutting force dynamometer
Journal: Journal of the Nigerian Institution of Production Engineers, 1998
Author: DAGWA, I.M. and IBHADODE, A.O.A.
Determination of Thermal Properties of Rock Samples Using Modified Thermal Block Method
Journal: Open access e-Journal, 2012
Author: Olukayode D. Akinyemi, Yemi S. Onifade, Biodun S. Badmus and O.S. Awokola
Finite Element Analysis and Design Validation of High Pressure Gate Valve for a Typical Nigerian Oil ...
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: ThankGod E. Boye, Thaddeus C. Nwaoha, Adeyemi I. Olabisi
Manufacture of metal-arc welding electrodes from locally available materials
Journal: Journal of the Nigerian Institution of Production Engineer, 1993
Author: OKOH, I.G. and IBHADODE, A.O.A