PUBLICATIONS
Physico-Chemical and Bacteriological Assessment of Abattoir Effluents and its effect on Agbarho Rive ...
Journal: Nigerian Journal of Applied Science, 2017
Author: Asibor, I., Edjere, O., and Ofejiro, P.
A new approach for the design of feedback control systems by the Bode Method
Journal: ournal of Electrical a nd Electronic Engineering ,, 1999
Author: IBHADODE, A.O.A.
Facilitating Hazard Analysis of LNG Carrier Operations via Risk Matrix Approach
Journal: International Journal of Science and Technology, 2016
Author: Thaddeus C. Nwaoha Jasper Agbakwuru Modestus O. Okwu
Development of a Manual Metal Arc Welding Flux from Local Raw Materials in Nigeria
Journal: Applied Mechanics and Materials, 2004
Author: Oyawale Festus Adekunle, Odior Andrew Oyakhobo, Ibhadode Akii
Report on the Evaluation of Ugua J2 and J3 Reservoir Performance
Journal: American Journal of Engineering and Applied Sciences, 2015
Author: 1 Okotie Sylvester, 2 Ikporo Bibobra and 3 Ovuema Augustina
Malware Propagation on Social Time Varying Networks: A Comparative Study of Machine Learning Framewo ...
Journal: International Journal of Modern Education and Computer Science (IJMECS), 2014
Author: A.A. Ojugo, E. Ben-Iwhiwhu, O. Kekeje, M.O. Yerokun, I.J.B. Iyawa
Evaluation of the Cost and Effect of Industrial Accidents
Journal: European Journal of Scientific Research, 2015
Author: Yusuf, T.A., Ismaila, S.O., Kuye, S.I. and Samuel, O.D.
Protoliths and Petrogenesis of Precambrian gneisses from the Igbeti Area Southwest Nigeria
Journal: Chemie der Erde, 1991
Author: Imeokparia, E.G., and Emofurieta, W.O
Predicting Reservoir Behavior using Mathematical Models 2 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
Effects of Process Variables on the Fermentation of Corn Stover: A Review
Journal: Journal of Scientific and Engineering Research, 2016
Author: Ohimor E. Onoghwarite, Ndirika V.I. Obiora, Eke A. Ben
Computer-Simulated Delta () For Vertical Transversely Isotropic (VTI) Media in Two Depobelts of the ...
Journal: The International Journal Of Engineering And Science, 2014
Author: Emudianughe, E. J , Alaminiokuma, G. I. and Ojugo, A. A
Modeling Work Task and the Bending Capabilities of Subjects
Journal: Journal of the Nigerian Association of Mathematical Physics , 2012
Author: Igboanugo, A. C. Ashiedu, F. and Onifade M. K.
Seismic Refraction Data Analyses: A Software for Low Velocity Layer Interpretation in the Niger Delt ...
Journal: Petroleum Technology Development Journal, 2017
Author: G. I. Alaminiokuma and T. Warmate
Implementation of a Microcontroller Based 5 KVA Automatic Voltage Stabilizer
Journal: International Journal of Latest Research in Engineering and Technology (IJLRET), 2017
Author: G. OFUALAGBA AND C. K. IGBINOBA
Preliminary Study on Antimicrobial Activity of Friendly Bacteria Isolated from Dairy Products
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2015
Author: Okorhi-Damisa, F. B. and Ataikiru, T. L.
Design and Development of a Manual Pump for Agrarian Communities
Journal: International Journal of Current Research , 2016
Author: Ashiedu F. I., Nwaoha T. C. and Izelu C. O.
Utilization of cellulosic cassava waste for bio-ethanol production
Journal: JECE, 2015
Author: Elias E.Elemike, Ojiefoh C.Oseghale, Anthony C.Okoye
Total Hydrocarbon Content in water and sediment samples from coastal region of Nigeria
Journal: journal ofEngineering Science and Technology, 2010
Author: Otitigbe F and Akpoturi P.E
Adjustment to Oil Saturation Estimate Due to Various Reservoir Drive Mechanisms
Journal: International Journal of Advanced Petroleum Engineering and Technology, 2014
Author: Okotie Sylvester and Ikporo Bibobra
Developments in the Measurement and Estimation Methods for Cement Clinker Quality Parameters
Journal: International Journal of Engineering Research Technology (IJERT), 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Performance evaluation of a prototype two component cutting force lathe dynamometer
Journal: journal and technology research, 2016
Author: A.O.Akii Ibhadode
Finite Element Analysis and Design Validation of High Pressure Gate Valve for a Typical Nigerian Oil ...
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: ThankGod E. Boye, Thaddeus C. Nwaoha, Adeyemi I. Olabisi
The Capability of using GIS in Managing Environmental Problem in the Niger Delta
Journal: Journal of Empirical Research., 2006
Author: Onosemuode, C and Okhae, S.E.
Performance Evaluation of an Indigenous Rotary Power Weeder
Journal: Energy and Environmental Engineering Journal, 2012
Author: Olaoye, J. O. and Samuel, O. D. and Adekanye, T. A
A Mixed Model Analysis of a Fertilizer Experiment on Oil Palm in Nigeria
Journal: Agricultural Sciences, 2016
Author: Edwin A. Iguodala, Eghwerido Joseph Thomas, Austin Edokpayi, Obilade Titilola
Hydrological Analysis of Onitsha North East Drainage Basin Using Geoinformatic Techniques.
Journal: World Applied Sciences Journal , 2010
Author: Onosemuode C. Adetimirin O. I and Aboderin S. O.
A Validation Method of Computational Fluid Dynamics (CFD) Simulation against Experimental Data of Tr ...
Journal: American Journal of Engineering Research (AJER) , 2017
Author: Boye, Thankgod, Nwaoha, T. C., Samuel, O. D and Ashiedu, F. I.
Performance characteristics and analysis of tailored Natural Rubber/Organo-kaolin Composites
Journal: International Journal of Plastics Technology, 2016
Author: Mgbemena, C.O., Ihueze, C.C. Menon, A.R.R.
Development of a Computer-Aided Application for Analyzing ECG Signals and Detection of Cardiac Arrhy ...
Journal: International Journal of Applied Information Systems , 2015
Author: Akinlolu A. Ponnle and Oludare Y. Ogundepo
Software for Reservoir Performance Prediction
Journal: Onepetrol Journal, 2015
Author: Okotie, Sylvester. and Onyekonwu Mike
Phytosynthesis of silver nanoparticles using aqueous leaf extracts of Lippia citriodora: Antimicrobi ...
Journal: MSEC, 2017
Author: Elias E. Elemike, Damian C. Onwudiwe, Anthony C. Ekennia, Richard C. Ehiri, Nnaemeka J. Nnaji
Performance Evaluation of a Pilot Paraplegic Centricity Mobility Aid
Journal: Nigeria Journal of Technology (NIJOTECH), 2016
Author: Ashiedu F. I., Popoola E. O., and Akpan E. E.
UNSTEADY MHD MIXED CONVECTION FLOW PAST AN OSCILLATING PLATE WITH HEAT SOURCE/SINK
Journal: Journal of Naval Architecture and Marine Engineering, 2014
Author: A. M. Okedoye
A Stochastic Model for Face Detection
Journal: Advances in Multidisciplinary Research Journal, 2016
Author: Ojugo, A. A., Allenotor, D., Oyemade, D. A.
Solving For Computational Intelligence the Timetable-Problem
Journal: , Advances in Multidisciplinary Research Journal, 2016
Author: Ojugo, A. A., Oyemade, D. A., Allenotor, D.
Determination of Optimum Manufacturing Conditions for Asbestos-free Brake Pad using Taguchi Method
Journal: Nigerian Journal of Engineering Research and Development, 2006
Author: Dagwa, Ishaya - Ibhadode, A.O.Akii
Pareto Principle and Hazard Model as Tools for Apporpriate Scheduled Maintenance in a Manufacturing ...
Journal: African Journal of Science, Technology, Innovation and Development, 2016
Author: Johnson A. Fadeyi, Modestus O. Okwu, Chinedum O. Mgbemena, Kingsley C. Ezekiel
Optimal transesterification duration for biodiesel produced from waste frying oil
Journal: British Journal of Renewable Energy,, 2015
Author: Samuel, O.D., Amosun, S.T. and Boye, T.E.
Computational Approach to Fracture Modelling of Polypropylene/Talc Composites.
Journal: Journal of Minerals and Materials Characterization and Engineering, , 2012
Author: Mgbemena, C.O., Okoye, O.A.
Effect of Sand invasion on Oil Well Production: A Case study of Garon Field in the Niger Delta
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Bibobra Ikporo and Okotie Sylvester
Characteristics of Some River Bed Sands and their Suitability for Making Colourless Glass
Journal: Ideal Journal of Engineering and Applied Science, 2016
Author: Edjere, O., Okpidi, T.J.I.
Development of useful products from agro-waste and polythene bags
Journal: Conference on New Products and Technologies for Small and Medium Enterprises,, 2001
Author: IBHADODE, A.O.A
Effect of Turning Parameters on Metal Removal and Tool Wear Rates of AISI 1018 Low Carbon Steel.
Journal: Nigerian Journal of Technology,, 2016
Author: Mgbemena, C.O., Mgbemena, C.E., Ashiedu, F.I. Etebenumeh, G. O.
Corner filling characteristics in precision forging
Journal: International Journal of Machine Tools and Manufacture , 1988
Author: A.O.A. Ibhadode,T.A.Dean
Solar Hydrogen Fuel Cell Technology, Principle, Applications and Market
Journal: Journal of Energy Technologies and Policy, International Institute for Science, Technology and Education, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles and Onyan Aaron Okiemute
Measurements and Evaluation of Anthropometric Data of Nigerian Adult Paraplegics for Wheelchair Desi ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences (JETEAS) , 2013
Author: Ashiedu, F. I. and Igboanugo A. C.
Petrological and Geochemical Characteristics of some Mesozoic granitic rocks hosting Sn-Nb-W-U miner ...
Journal: Petrogenesis and Minealization of Ganitoids Science Press, Beijing, China, 1992
Author: Imeokparia, E.G.
Justification for Oil Well Stimulation
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Okotie Sylvester, Ubani C. E., Ikporo Bibobra
Fluorine and Chlorine in granitic rocks from Jos Bukuru Complex, Central Nigeria.
Journal: African Jour. Science and technology, 1989
Author: Imeokparia, E.G
DETERMINATION OF NI(II) CRYSTAL STRUCTURE BY POWDER X-RAY DIFFRACTION
Journal: Scientia Africana, 2015
Author: J. I. Mbonu