PUBLICATIONS
Modelling and optimization of surface roughness and machining induced vibration 41Cr4 alloy structu ...
Journal: The International Journal Of Engineering And Science (IJES), 2016
Author: Izelu, C.O., Eze, S.C. and Samuel, Olusegun David
Development of an Electric induction furnace for heat treatment of ferrous and non-ferrous alloys,
Journal: American Journal of Engineering Research,, 2015
Author: Anaidhuno, U.P Mgbemena, C.O
Development of a New Flux for Aluminium Gas Welding
Journal: Advanced Materials Research, 1994
Author: Joseph I. Achebo, A.O. Akii Ibhadode
An Optimized Parallel Hybrid Architecture for Cryptocurrency Mining
Journal: Computing, Information Systems, Development Informatics Allied Research Journal, 2021
Author: David Allenotor, David Ademola Oyemade
Assessment of the activities of scavengers and their economic impacts in waste recovery in Warri met ...
Journal: International Research Journal of Public and Environmental Health, 2017
Author: Asibor Godwin, Edjere Oghenekohwiroro
Design of Maximum Power Point Tracker (MPPT) and Phase Locked Loop (PLL) in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
Work Flow for Reservoir Study and Challenges
Journal: Onepetrol Journal, 2015
Author: Okotie Sylvester. and Stanley Buduka. and Ikporo Bibobra
Design of DC-link Voltage Controller and Grid Current Controller in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Stochastic Analysis of the Effect of Asset Prices to a Single Economic Investor
Journal: Bulletin of Mathematical Sciences and Applications, 2016
Author: E. Ekuma-Okereke, J. T. Eghwerido, E. Efe-Eyefia, S. Zelibe
Preliminary study on antimicrobial activity of friendly bacteria isolated from dairy products: Prel ...
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2005
Author: OKORHI F. BEATRICE AND ATAIKIRU TEGA
Finite Element Analysis and Design Validation of High Pressure Gate Valve for a Typical Nigerian Oi ...
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: ThankGod E. Boye, Thaddeus C. Nwaoha and Adeyemi I. Olabisi
The Use of Geoinformatics Techniques in Site Selection for solid Waste Dump A Case Study of Warri an ...
Journal: International Journal of Science and Research (IJSR), 2017
Author: Christopher Onosemuode and Omorogbe Osemwegie
APPLICATION OF CASSAVA PEELS ACTIVATED CARBON IN THE TREATMENT OF OIL REFINERY WASTEWATER A COMPARA ...
Journal: Journal of Ecological Engineering, 2016
Author: Kigho Moses Oghenejoboh, Smith Orode Otuagoma, Evuensiri Onogwharite Ohimor
SYNTHESIS, SPECTROSCOPIC CHARACTERIZATION AND ANTI-MICROBIAL ACTIVITIES OF (Z)-4-(4-(DIMETHYLAMINO)B ...
Journal: Scientia Africana, 2015
Author: E. E. Elemike, A. P. Oviawe and O. Iyekowa
Analyzing Thermal Insulation for Effective Hydrate Prevention in Conceptual Subsea Pipeline Design
Journal: International Journal of Current Engineering and Technology, 2015
Author: Okologume Wilfred and Dulu Appah
Socio-economic Dynamics of Landuse Pattern: A Case Study of Warri
Journal: Nigeria Journal of Tropical Geography., 2006
Author: Onosemuode Christopher
DETERMINATION OF NI(II) CRYSTAL STRUCTURE BY POWDER X-RAY DIFFRACTION
Journal: Scientia Africana, 2015
Author: J. I. Mbonu
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
A Comparative Evolutionary Models for Solving Sudoku, Automation, Control and Intelligent Systems
Journal: Automation, Control and Intelligent Systems, 2013
Author: Ojugo, A. A., Oyemade, D., Yoro, R. E., Eboka, A. O. Yerokun, M. O., Ugboh, E.
Analytical Solution of MHD Free Convective Heat and Mass Transfer Flow in a Porous Medium.
Journal: The Pacific Journal of Science and Technology, 2013
Author: Akindele Michael Okedoye Ph.D.
Optimal transesterification duration for biodiesel produced from waste frying oil
Journal: British Journal of Renewable Energy,, 2015
Author: Samuel, O.D., Amosun, S.T. and Boye, T.E.
Measurements and Evaluation of Anthropometric Data of Nigerian Adult Paraplegics for Wheelchair Desi ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences (JETEAS) , 2013
Author: Ashiedu, F. I. and Igboanugo A. C.
Report on the Evaluation of Ugua J2 and J3 Reservoir Performance.
Journal: American Journal of Engineering and Applied Sciences, 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ovuema Augustina
APPLICATION OF DESIGN EXPERT IN THE ANALYSIS OF RESPONSE TRANSFORMATION OF PROCESSES A CASE STUDY O ...
Journal: International Journal of Advanced Research (IJAR), 2017
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora and Eke Akachukwu Ben.
A Nonlinear Approach to Queueing System Modelling,
Journal: International Journal of Engineering Science and Technology, 2010
Author: Mgbemena, C.E., Mgbemena, C.O., Chinwuko, C.E
Facilitating Hazard Analysis of LNG Carrier Operations via Risk Matrix Approach
Journal: International Journal of Science and Technology, 2016
Author: Thaddeus C. Nwaoha Jasper Agbakwuru Modestus O. Okwu
Green synthesis and growth kinetics of nanosilver under bio-diversified plant extracts influence
Journal: J Nanostr Chem, 2015
Author: Enock Olugbenga Dare Charles Ojiefoh Oseghale Ayomide Hassan Labulo Elijah Temitope Adesuji Elias Emeka Elemike Jude
Risering of a Four-Cavity Die Production Mould by Convectional Method
Journal: Advanced Materials Research, 1994
Author: Prof. A.O. Akii Ibhadode, A.I. Igbafe and B.U. Anyata
THE SECURITY PROVIDER... Social Responsibility and Customer Satisfaction
Journal: Security, 2020
Author: Onakpoma Oboroghenerukohwo
Problems of Environmental Pollution and Control in the Nigeria Petroleum Industry
Journal: journal of research in Engineering and Environmental Studies, 2006
Author: Akpoturi P.E and Ndukwe J.O
Phthalate esters in raw and finished water from drinking water treatment plants and human exposure i ...
Journal: African Scientist, 2025
Author: Okpara K.E. and Tesi, G.O.
An analysis of coconut ethyl ester (biodiesel) and fossil diesel blending: properties and corrosion ...
Journal: Nigerian Journal of Technology (NIJOTECH), 2016
Author: Samuel Olusegun .David, Ashiedu, F.I. and Orek, B.U
A survey of traditional foundries and forge shops and a training programme for traditional metal cra ...
Journal: Benin Journal of Educational Studies, 1999
Author: IBHADODE, A.O.A
Determination of Optimum Welding Flux Composition Using the Bend Strength Test Technique
Journal: Advanced Materials Research , 1994
Author: Joseph I. Achebo, A.O. Akii Ibhadod
Sorption of Mn(II) ions from wastewater using dried and blended water hyacinth (Eichhornia crassipes ...
Journal: Journal of the Turkish Chemical Society Section A: Chemistry,, 2024
Author: Tesi, G.O., Ejeromedoghene, O., Kpomah, B. and Ipeaiyeda, A.R.
Optimisation of Alkaline Ethanolysis of Biodiesel Yield from Nigerian Coconut Oil using One Variable ...
Journal: JENRM, 2014
Author: Samuel O.D., Okwu M. O., Oreko U.O., Amosun S. T.
A combined algorithm approach to fuel consumption rate analysis and prediction of sea-worthy diesel ...
Journal: Journal of Engineering for the Maritime Environment, 2016
Author: Thaddeus C Nwaoha Garrick Ombor and Modestus O Okwu
Effects of Self-regulated learning and Metacognitive learning cycle on the academic achievement of ...
Journal: Open Journal of Advanced Engineering Techniques, , 2013
Author: Inomiesa, E.A., Achufusi, N.N. Mgbemena, C.O.
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: Australian Journal of Engineering Research. , 2015
Author: C.O Izelu, Eze S.C, Oreko B.U and Edward, B.A
A Mixed Model Analysis of a Fertilizer Experiment on Oil Palm in Nigeria
Journal: Agricultural Sciences, 2016
Author: Edwin A. Iguodala, Eghwerido Joseph Thomas, Austin Edokpayi, Obilade Titilola
Development and properties tests of aluminium grease for low velocity applications.
Journal: The Pacific Journal of Science and Technology, 2012
Author: Samuel, O.D, Isiaka, I.O and Omoleye, J.A.
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: International Journal of Machine Tools and Manufacture, 2004
Author: P.E. Amiolemhen, A.O.A. Ibhadode
Critical Stress Analysis of a Formula One Racing Car Wishbone Suspension System
Journal: International Journal of Engineering and Manufacturing Science (IJEMS), 2016
Author: ThankGod Enatimi Boye and Chinedum Ogonna Mgbemena
On the realization of the Equilibrium State of FluidBorne Marine Vessels
Journal: International Journal of Science and Technology (IJST) , 2016
Author: Obinabo E. C., Nwaoha T. C. and Ashiedu F. I.
The Pareto principle and Hazard model as tools for appropriate scheduled maintenance in a manufactur ...
Journal: African Journal of Science, Technology, Innovation and Development, 2016
Author: Fadeyi, J.A., Okwu, M.O., Mgbemena, C.O., Ezekiel, K.C. (2016).
IMPLEMENTATION OF A MICROCONTROLLER BASED PURE SINE WAVE INVERTER
Journal: International Journal of Scientific Engineering and Applied Science (IJSEAS), 2017
Author: GODSWILL OFUALAGBA AND CHARLES KEVWE IGBINOBA
Small and Meduim Scale Enterprises- Catalyst for National Development in Nigeria
Journal: Journal of Scientific and Industrial Studies, 2007
Author: Akpoturi P.E
ENTROPY GENERATION IN COMBINED HEAT AND MASS TRANSFER EFFECT ON MHD FREE CONVECTION FLOW PAST AN OSC ...
Journal: Journal of Mathematics and Science (JMS) , 2015
Author: OKEDOYE A. M
Application of re-refined used lubricating oil as base oil for the formulation of oil based drilling ...
Journal: Journal of Petroleum Technology and Alternative Fuels, 2013
Author: Oghenejoboh K. M., Ohimor E. O. and Olayebi O.
Engine Spare Parts Production through Copy Manufacture and Substitution Approach
Journal: Advanced Materials Research, 1994
Author: E.H. Amalu, A.O. Akii Ibhadode