PUBLICATIONS
Predicting Reservoir Behavoiur using Mathematical Model 2: Water underunning.
Journal: Journal of Engineering and Applied Scientific Research, 2015
Author: Akpoturi Peters
Automobile disk brake pads made from palm kernel shell
Journal: Conference on New Products and Technologies for Small and Medium Enterprises,, 2001
Author: IBHADODE, A.O.A. and OLADEINDE, M.H
Application of Markov Theoretical Model in Predicting Risk Severity and Exposure Levels of Workers i ...
Journal: International Journal of Mechanical Engineering and Applications, 2016
Author: Okwu Modestus Okechukwu Thaddeus C. Nwaoha Ombor Garrick
Design, production and performance testing of two component cutting force dynamometer
Journal: Journal of the Nigerian Institution of Production Engineers, 1998
Author: DAGWA, I.M. and IBHADODE, A.O.A.
The Effects of Agricultural Activities on the Environment in Keffi, Nasarawa State, Nigeria..
Journal: International Journal of Pure and Applied Sciences. , 2010
Author: Onosemuode, C Adesina Damilola and Okhae, S.E.
Modelling of Multiphase Flow Metering for Crude Oil Production Monitoring
Journal: International Journal of Current Engineering and Technology, 2015
Author: Ego C. Obukohwo, Okologume C. Wilfred, Dulu Appah and Marcus B. Umeleuma
ANALYSIS OF COCONUT ETHYL ESTER (BIODIESEL) AND FOSSIL DIESEL BLENDING: PROPERTIES AND CORROSION CHA ...
Journal: Nigerian Journal of Technology, 2016
Author: Samuel, O. D., Ashiedu, F. I., Oreko, B. U
Effects of breadfruit seed hull ash on the microstructures and properties of AlSiFe alloy/breadfruit ...
Journal: undefined!, 2012
Author: C.U.AtuanyaaA.O.A.Ibhadode.M.Dagwac
Assessment of the Impacts of Refinery Effluent on the Physico-chemical Properties of Ubeji Creek, De ...
Journal: Journal of Environmental Analytical Toxicology , 2017
Author: Eunice OE, Frank O, Voke U, Godwin A
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: Australian Journal of Engineering Research. , 2015
Author: C.O Izelu, Eze S.C, Oreko B.U and Edward, B.A
A Typified Greedy Dynamic Programming Model for the MetaTrader Platform
Journal: Journal of Advances in Mathematical and Computational Sciences, 2020
Author: Oyemade, D. A.
Work Flow for Reservoir Study and Challenges
Journal: Onepetrol Journal, 2015
Author: Okotie Sylvester. and Stanley Buduka. and Ikporo Bibobra
Thermal behavior and UV properties of Organomodified kaolin oleochemically derived from Rubber Seed ...
Journal: Journal of Surface Engineered Materials and Advanced Technology,, 2013
Author: Mgbemena, C.O., Ibekwe, N.O., Mohamed, A.P., Menon, A.R.R. Sukumar, R.
Assessment of Soil Quality for Sustainable Agricultural Development in Kaita, Katsina State, Nigeria
Journal: International Journal of Sustainable Development. , 2011
Author: Onosemuode, C Umunade O. Charleston. .
Modeling to Support using Crouch Technique to Lift Low-Lying Objects
Journal: Journal of the Nigerian Association of Mathematical Physics , 2012
Author: Igboanugo, A. C. Ashiedu, F. And Onifade M. K.
The Applied Geochemist and the Challenges of Georesource Evaluation for Sustainable development and ...
Journal: University of Benin, Benin City, 2015
Author: Imeokparia, E.G.
Accident Causative Model in the Oil and Gas Conurbation using Markov Chain
Journal: International Journal of Scientific Research in Information Systems and Engineering (IJSRISE), 2016
Author: Okwu, M. O., Thaddeus Nwaoha, ., Adeyemi, I. O., Ezurike Benjamin. O
Design of composite dies by the die expansion method
Journal: Technical Transactions of the Nigerian Society of Engineers, 1999
Author: IBHADODE, A.O.A
Design of Maximum Power Point Tracker (MPPT) and Phase Locked Loop (PLL) in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Total Hydrocarbon Content in water and sediment samples from coastal region of Nigeria
Journal: journal ofEngineering Science and Technology, 2010
Author: Otitigbe F and Akpoturi P.E
Potentiation of the Antimicrobial Activity of 4-Benzylimino-2,3-Dimethyl-1-Phenylpyrazal-5-One by Me ...
Journal: Res J Chem Sci, 2011
Author: E.E.Elemike, A.P.Oviawe and I.E.Otuokere
Investigating the Calibration Curves for a Two Component Cutting Tool Lathe Dynamometer Using Finite ...
Journal: International Journal of Engineering Research in Africa, 2010
Author: Osezua Obehi Ibhadode, Ishaya Musa Dagwa, Akii Okonigbon Akhaehomen Ibhadode
Use of inequalities in the determination of control systems compensation parameters
Journal: Advances in Modeling Analysis C. AMSE Press, 1993
Author: IBHADODE, A.O.A
Crystal structure of tetraaquabis(3,5-diamino- 4H-1,2,4-triazol-1-ium)cobalt(II) bis[bis(pyridine-2, ...
Journal: Acta Cryst, 2015
Author: Atim Johnson, Justina Mbonu, Zahid Hussain, Wan-Sin Lohe and Hoong-Kun Funf,
Cost-Saving and Internally Generated Revenue in Tertiary Educational Institutions: The Role of Cloud ...
Journal: International Journal of Education and Information Technology, 2018
Author: Orobor Anderson Ise, Orobor Helen Elohor
Application of Geographical Information System (GIS) for Spatial Decision Support in Eco-Tourism Dev ...
Journal: Environmental Research Journal, 2010
Author: Onosemuode C. and Dare O.T. (2010)
MHD Stagnation Point Flow over a Permeable Vertical Plate with a Convective Surface Boundary Conditi ...
Journal: International Journal of Innovative Science, Engineering Technology,, 2015
Author: Akindele Michael Okedoye
Modelling prevention and reduction methods of ship propeller cavitation under uncertainty, Ships and ...
Journal: Ships and Offshore Structures, 2017
Author: 1. Thaddeus C. Nwaoha, Sidum Adumene and ThankGod E. Boye
Performance Evaluation of a Pilot Paraplegic Centricity Mobility Aid
Journal: Nigeria Journal of Technology (NIJOTECH), 2016
Author: Ashiedu F. I., Popoola E. O., and Akpan E. E.
Distribution pattern, sources and ecological risk assessment of polycyclic aromatic hydrocarbons (PA ...
Journal: Journal of Chemical Society of Nigeria, 2025
Author: Okonkwo, E.O., Nwajei, G.E., Agbaire, P.O. and Tesi, G.O
DETERMINATION OF NI(II) CRYSTAL STRUCTURE BY POWDER X-RAY DIFFRACTION
Journal: Scientia Africana, 2015
Author: J. I. Mbonu
Sequestering of Fe and Pb ions from Wastewater by Canarium schweinfurthii after carbonization and ch ...
Journal: Journal of Applied Science and Environmental Management, 2016
Author: Bassey Uwem, Oghenekohwiroro Edjere and Solomon Ebiye Otolo
COMPARATIVE EVALUATION OF ARTIFICIAL LIFT METHODS ON A NIGER DELTA FIELD
Journal: Academic Research International , 2016
Author: Okologume Chinedu Wilfred, Ofesi Samuel F
ENTROPY GENERATION IN COMBINED HEAT AND MASS TRANSFER EFFECT ON MHD FREE CONVECTION FLOW PAST AN OSC ...
Journal: Journal of Mathematics and Science (JMS) , 2015
Author: OKEDOYE A. M
Gas Lift Technique a Tool to Production Optimization
Journal: International Journal of Oil, Gas and Coal Engineering, 2015
Author: Okotie Sylvester 1 , Ikporo Bibobra 2 , Ovuema Augustina 1
A Validation Method of Computational Fluid Dynamics (CFD) Simulation against Experimental Data of Tr ...
Journal: American Journal of Engineering Research (AJER), 2017
Author: ThankGod E. Boye, Thaddeus C. Nwaoha Samuel D. Olusegun, Festus I. Ashiedu
Design and Development of a Paraplegic Centricity Mobility Aid
Journal: Journal of Emerging Trend in Engineering and Applied Science (JETEAS) , 2012
Author: Ashiedu Festus and Igboanugo A. C.
Work-Trips Generation in Warri and Environs: A Spatial Perspective
Journal: Journal of Environmental Studies, 2007
Author: Onosemuode, C and Onosemuode, K. E . .
Optimization of Nigerian Restaurant Waste Cooking Biodiesel Reaction Parameters using Response Surfa ...
Journal: International Journal of Energy Optimization and Engineering, 2014
Author: Waheed, M.A., Samuel, O.D., Bolaji, B.O. and Dairo, O.U.
Empirical Model for Bioethanol Production Process from Corn Stover Using Response Surface Methodolog ...
Journal: International Journal of Emerging Trends in Engineering and Development, 2016
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora, Eke Akachukwu Ben
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in Industry, Vol 33, Iss 1, Pp 11-17 (2011), 2011
Author: A. C. Igboanugo / A. O. A. Ibhadode / C. U. Atuanya
Determination of Optimum Manufacturing Conditions for Asbestos-free Brake Pad using Taguchi Method
Journal: Nigerian Journal of Engineering Research and Development, 2006
Author: Dagwa, Ishaya - Ibhadode, A.O.Akii
KINETIC MODELING FOR REMOVAL OF Pb, Cd, Ni, and Cr ions FROM PETROCHEMICAL EFFLUENT USING TERMITE SO ...
Journal: International Journal of Sciences, 2016
Author: I. E. Agbozu and U. Bassey
Effects of Sodium Hydroxide Concentration on the Physical Properties of Zeolite Produced from Local ...
Journal: European Journal of Scientific Research, 2011
Author: Oghenejoboh, K. M. and Ohimor, E. O.
Development of a New Flux for Aluminium Gas Welding
Journal: : Advanced Materials Research, 1994
Author: oseph I. Achebo, A.O. Akii Ibhadode
Effects of breadfruit seed hull ash on the microstructures and properties of AlSiFe alloy/breadfruit ...
Journal: undefined!, 2012
Author: ites Author links open overlay panelC.U.AtuanyaaA.O.A.Ibhadode.M.Dagwa
Hydrocarbon Degradation Potentials of Indigeneous Fungal Isolates from a Petroleum Hydrocarbon Conta ...
Journal: Global Advanced Research Journal of Environmental Science and Toxicology, 2014
Author: Iheanacho, C. C., Okerentugba, P. O., Orji, F. A. and Ataikiru, T. L.
An investigation of the efficacy of enhanced oil recovery by means of micro-organisms in Niger Delta ...
Journal: J. Pet. Gas Explor. Res., 2014
Author: - Ikporo Bibobra. and Okotie Sylvester.
The effect of die container compounding on product accuracy in completely closed cavity die forging
Journal: Manufacturing Engineering Society International Conference, Calatayud, Spain, 2005
Author: IBHADODE, A.O.A. and AIBANGBEE, G.F
The Effect of Teaching Methods on Achievement of Senior Secondary Class One Students in Physics.
Journal: International Journal of Advances in Science and Technology,, 2011
Author: Achufusi, N.N., Mgbemena, C.O., Mgbemena, C.E., Nwoye, A.