PUBLICATIONS
Advances in materials and systems technologies IV : selected, peer reviewed papers from the 4th Inte ...
Journal: Advanced materials research, 2013
Author: Ibhadode, A. O. Akii / Aluyor, E.O.
High Power Picosecond Laser Surface Micro-texturing of H13 Tool Steel and Pattern Replication onto A ...
Journal: Lasers in Manufacturing and Materials Processing, 2016
Author: Otanocha, O.B., Li, L., Zhong, S. and Liu, Z
Effects of Sodium Hydroxide Concentration on the Physical Properties of Zeolite Produced from Local ...
Journal: European Journal of Scientific Research, 2011
Author: Oghenejoboh, K. M. and Ohimor, E. O.
The Effect of Calcium Carbonate at Low Volume Fractions On the Mechanical Properties of Polypropylen ...
Journal: Journal of Engineering and Applied Sciences, , 2010
Author: Mgbemena, C.O., Ubani, N.O., Mgbemena, C.E.
Experimental Study on a Line-Axis Concentrating Solar Energy Collector for Water Heating
Journal: Industrial Engineering, 2017
Author: Frederick Ikpakwu, Anthony Okoronkwo, Modestus Okwu, Emmanuel Anyanwu
Advances in materials and systems technologies II
Journal: Advanced materials research, , 2009
Author: A O Ibhadode I A Igbafe B U Anyata
Assessment of the Social and Environmental Impacts of Keffi-Lafia Federal Highway.
Journal: International Journal of Physical Science. , 2011
Author: Onosemuode, C and Akwa, L
Evaluation of the Cost and Effect of Industrial Accidents
Journal: European Journal of Scientific Research, 2015
Author: Yusuf, T.A., Ismaila, S.O., Kuye, S.I. and Samuel, O.D.
Assessment of the Impacts of Industrialization in Esan Land, Edo State, Nigeria
Journal: Continental Journal of Environmental Design and Management , 2012
Author: Akhimien F.O, Onosemuode C and Ibhadode C
Numerical Investigation of Thermo-Mechanical Behaviour of Ball Grid Array Solder Joint at High Tempe ...
Journal: al: Advanced Materials Research , 1994
Author: E.H. Amalu, N.N. Ekere, R.S. Bhatti, S. Mallik, G. Takyi, A.O. Akii Ibhadode
Office Noise Pollution in industrial and commercial premises in Nigeria
Journal: Nigerian journal of Industrial and Systems Studies (NJISS), 2005
Author: Akpoturi P E and J Ndukwe
The Spatial Assessment of Wastes Collection Points Using GIS Approach.
Journal: The Nigerian Journal of Cartography and GIS., 2013
Author: Onosemuode C. Ajayi O. Ayodele and Esemedade J. U
Determination of Thermal Properties of Rock Samples Using Modified Thermal Block Method
Journal: Open access e-Journal, 2012
Author: Olukayode D. Akinyemi, Yemi S. Onifade, Biodun S. Badmus and O.S. Awokola
The Assessment of Baseline Ecological Data for Environmental Management: A Case study of the Coasta ...
Journal: The Nigeria Academic Forum, 2004
Author: Onosemuode Christopher
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetrol Journal, 2015
Author: Ovuema Augustina and Okotie Sylvester
Advances in Materials and Systems Technologies III
Journal: Advanced materials research, 2012
Author: Prof. A.O. Akii Ibhadode
Effect of Sand invasion on Oil Well Production: A Case study of Garon Field in the Niger Delta
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Bibobra Ikporo and Okotie Sylvester
Assessing mechanical properties of natural fibre reinforced composites for engineering applications ...
Journal: Journal of Minerals and Materials Characterization and Engineering, 2012
Author: Samuel, O.D., Agbo, S. and Adekanye, T.A.
CARBON NANOTUBES: A REVIEW OF THE CURRENT STATE-OF-THE-ART MATERIAL SCIENCE AND TECHNOLOGY TOWARDS A ...
Journal: Int J Cur Res Rev , 2015
Author: Boye T.E., Oyekale J.O., Arivie G.O.
A Contingent Claim Approach to Bank Valuation
Journal: Journal of Mathematical Finance, 2014
Author: Enahoro Alfred Owoloko, Nicholas Amienwan Omoregbe, Michael Akindele Okedoye
Biosynthesis, characterization and antimicrobial effect of silver nanoparticles obtained using Lavan ...
Journal: Res.Chem Int, 2017
Author: Elias E. Elemike, Damian C. Onwudiwe,Anthony C. Ekennia Lebogang Katata-Seru
Some physical and mechanical properties of palm kernel shell (PKS)
Journal: Botswana Journal of Technology, 2010
Author: IM Dagwa, AO Ibhadode
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: INTERNATIONAL JOURNAL OF MACHINE TOOLS AND MANUFACTURE, 2004
Author: Amiolemhen, P. E. / Ibhadode, A. O.
Some physical and mechanical properties of asbestosfree experimental brake pad
Journal: JOURNAL OF RAW MATERIALS RESEARCH , 2006
Author: I M. Dagwa, A. O. A. Ibhadode
A Critical review of in-situ transesterification process for Biodiesel Production.
Journal: The Pacific Journal of Science and Technology, 2012
Author: Samuel, O.D. and Dairo, O.U.,
Optimisation Of Alkaline Ethanolysis Of Biodiesel Yield From Nigerian Coconut Oil Using One Variable ...
Journal: JENRM, 2014
Author: Samuel, O.D, Okwu, M.O., Oreko B. and Amosun S.T
ACADEMIC CEREMONY SECURITY PLAN
Journal: Security, 2019
Author: Onakpoma Oboroghenerukohwo
Cost-Saving and Internally Generated Revenue in Tertiary Educational Institutions: The Role of Cloud ...
Journal: International Journal of Education and Information Technology, 2018
Author: Orobor Anderson Ise, Orobor Helen Elohor
Improving Physics Learning in Secondary Schools Using Metacognition.,
Journal: International Journal of Advances in Science and Technology, 2011
Author: Achufusi, N.N., Mgbemena, C.O., Mgbemena, C.E., Nwoye, A.
Precision die design by the die expansion method
Journal: Materials science foundations, 2009
Author: Ibhadode, A. O. Akii
Evaluation of Pure Aluminium Inoculated with Varying Grain Sizes of an Agro-waste based Inoculant
Journal: Advances in Science, Technology and Engineering Systems Journal , 2017
Author: 2. Adeyemi I. Olabisi, ThankGod E. Boye, Emagbetere Eyere
Manufacture of hand hacksaw blades form locally available mild stee
Journal: The Nigerian Engineer, 1991
Author: IBHADODE, A.O.A. and OJEAH, C.C
Evaluation of a Systematic Approach to Matrix Acidizing on an Oil Producing Well
Journal: International Journal of Research in Engineering and Technology, 2015
Author: Okologume C. Wilfred, Marcus Bourdelon Umeleuma
A Method for Stimulation Candidate Well Selection
Journal: International Journal of Engineering and Technology, 2015
Author: undefined!
Utilization of Nigerian precious Resource in the Niger Delta Region for the benefit of the Ecosystem ...
Journal: International Journal of Engineering and Technology (IJET), 2014
Author: Okotie Sylvester and Ikporo Bibobra
Impact of Cartography on the Development of Tourism Business in Nigeria
Journal: Ofobruku S. A and Onosemuode C (ed) Tourism and Hospitality Business in Nigeria., 2014
Author: Onosemuode, Christopher
A Validation Method of Computational Fluid Dynamics (CFD) Simulation against Experimental Data of Tr ...
Journal: American Journal of Engineering Research (AJER), 2017
Author: ThankGod E. Boye, Thaddeus C. Nwaoha Samuel D. Olusegun, Festus I. Ashiedu
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: International Journal of Machine Tools and Manufacture, 2004
Author: P.E. Amiolemhen, A.O.A. Ibhadode
On the Unsteady Free Convective Flow with Radiative Heat Transfer of Sisko Fluid
Journal: International Journal of Innovative Science, Engineering Technology, 2015
Author: Akindele Michael Okedoye
pH Level Activity in Crude oil Contaminated Soil Bio remediated with natural sources
Journal: journal of Engineering and Applied Scientific Research, 2014
Author: Akpoturi P.E
Identification and Morphology of pathogens in liquid effluent from a biodigester with cow dung feed ...
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2020
Author: Ogunkeyede A.O, Okorhi-Damisa B.F, Tedjere E, and Adeniyi S.
Application of re-refined used lubricating oil as base oil for the formulation of oil based drilling ...
Journal: Journal of Petroleum Technology and Alternative Fuels, 2013
Author: Oghenejoboh K. M., Ohimor E. O. and Olayebi O.
Development of Asbestos-Free Friction Lining Material from Palm Kernel Shell
Journal: Journal of the Brazilian Society of Mechanical Sciences, 2008
Author: A. O. A. Ibhadode, I. M. Dagwa
Delineation of Soil Corrosivity Regimes Along Petroleum Pipeline Routes in the Geomorphic Zones of t ...
Journal: Petroleum Technology Development Journal, 2016
Author: Alaminiokuma, G. I., Osokpor, J., Emudianughe, J. E. and Warmate, T.
Design and Manufacture of a 30-ton Hydraulic Press
Journal: Mechanical Engineering Department, Federal University of Technology , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Geospatial Assessment Of Vulnerable Areas To Flood Hazard and Risk Along Ikpoba River, Benin Edo S ...
Journal: The Nigerian Journal of Cartography and GIS. , 2014
Author: Onosemuode C. and Ovririe E
Hyperelastic modelling and limit stress prediction of a P195/55 R16 85H Radial tire developed from N ...
Journal: American Journal of Material Sciences and Applications., 2014
Author: Ihueze, C.C, Mgbemena, C.O.
A Classification Model Based on Machine Learning for Detecting Racist Comments on Social Media Platf ...
Journal: Journal of Behavioural Informatics, Digital Humanities and Development Research., 2021
Author: Allenotor, D. Oyemade, D. A.
Evaluation of the Levels of Phthalate Ester Plasticizers in Surface Water of Ethiope River System, N ...
Journal: Journal of Applied Sciences and Environmental Management, 2016
Author: Edjere, O., Asibor, I.G. and Otolo, S.E.
Optimization of coconut oil ethyl esters reaction variables and prediction model of its blends with ...
Journal: http://www.tandfonline.com/loi/tbfu20, 2016
Author: Olusegun David Samuel, Solomon Olanrewaju Giwa Abdulssalam El- Suleiman