PUBLICATIONS
Bioethanol production from corn stover using Saccharomyces cerevisiae
Journal: International Journal of Scientific Engineering Research, 2016
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora, Eke Akachukwu Ben and Nsidibe-Obong Ekpe Moses
Advances in materials and systems technologies III
Journal: Advanced materials research, 2012
Author: Prof. A.O. Akii Ibhadode
Predicting Reservoir Behavior using Mathematical Models 3 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
Predicting Reservoir Behavoiur using Mathematical Model 2: Water underunning.
Journal: Journal of Engineering and Applied Scientific Research, 2015
Author: Akpoturi Peters
Nigeria Natural Gas Supply Preference and the Environment
Journal: Journal of Energy Technologies and Policy, 2014
Author: Wilfred Chinedu Okologume
Development of a Production Mould for Casting Single - Cylinder Engine Pistons
Journal: ADVANCED MATERIALS RESEARCH -ZUG, 2007
Author: Zhengwuvi, L. B. / Ibhadode, A. O.A.
Utilization of Nigerian precious Resource in the Niger Delta Region for the benefit of the Ecosystem ...
Journal: International Journal of Engineering and Technology (IJET), 2014
Author: Okotie Sylvester and Ikporo Bibobra
Total Hydrocarbon Content in water and sediment samples from coastal region of Nigeria
Journal: journal ofEngineering Science and Technology, 2010
Author: Otitigbe F and Akpoturi P.E
The Effects of Wood Ash on Ignition Point of Wood
Journal: World Academy of Science, Engineering and Technology, 2015
Author: Kenneth A. Ibe, Justina I. Mbonu, Godgift K. Umukoro
Investigation of plume dynamics during picosecond laser ablation of H13 steel using high-speed digit ...
Journal: Applied Physics A, 2017
Author: Krste Pangovski, Omonigho B. Otanocha, Shan Zhong, Martin Sparkes, Zhu Liu, William ONeill, Lin Li
Potentiation of the Antimicrobial Activity of 4-Benzylimino-2,3-Dimethyl-1-Phenylpyrazal-5-One by Me ...
Journal: Res J Chem Sci, 2011
Author: E.E.Elemike, A.P.Oviawe and I.E.Otuokere
Computerised Design Approach to a Sub-Press Mould for Composite Materials Manufacture
Journal: al: Advanced Materials Research, 1994
Author: Ishaya Musa Dagwa, A.O. Akii Ibhadode
Experimental Study on a Line-Axis Concentrating Solar Energy Collector for Water Heating
Journal: Industrial Engineering, 2017
Author: Frederick Ikpakwu, Anthony Okoronkwo, Modestus Okwu, Emmanuel Anyanwu
Distribution pattern, sources and ecological risk assessment of polycyclic aromatic hydrocarbons (PA ...
Journal: Journal of Chemical Society of Nigeria, 2025
Author: Okonkwo, E.O., Nwajei, G.E., Agbaire, P.O. and Tesi, G.O
The Design of a Manual Table-Top Grinder,
Journal: Scholars Journal of Engineering and Technology,, 2014
Author: Abdulmalik, I.O., Michael, A., Akonyi, N.S., Mgbemena, C.O., Aaron-Orsu, C.J Ambali, A.O.
Critical Stress Analysis of a Formula One Racing Car Wishbone Suspension System
Journal: International Journal of Engineering and Manufacturing Science (IJEMS), 2016
Author: ThankGod Enatimi Boye and Chinedum Ogonna Mgbemena
Technical Properties of Some Plant Fibres Compared with Glass Fibre
Journal: : International Journal of Engineering Research in Africa , 2010
Author: M. Sumaila, A.O. Akii Ibhadode
Automobile disk brake pads made from palm kernel shell
Journal: Conference on New Products and Technologies for Small and Medium Enterprises,, 2001
Author: IBHADODE, A.O.A. and OLADEINDE, M.H
Malware Propagation on Social Time Varying Networks: A Comparative Study of Machine Learning Framewo ...
Journal: International Journal of Modern Education and Computer Science (IJMECS), 2014
Author: A.A. Ojugo, E. Ben-Iwhiwhu, O. Kekeje, M.O. Yerokun, I.J.B. Iyawa
Ecological effects of oil spill on pelagic and bottom dwelling organisms in the riverine areas of Od ...
Journal: Journal of Ecology and the Natural Environment. , 2016
Author: Doris Fovwe Ogeleka, Oghenekohwiroro Edjere, Angela Nwudu and Felix Ebodaghe Okieimen
Analyzing Thermal Insulation for Effective Hydrate Prevention in Conceptual Subsea Pipeline Design
Journal: International Journal of Current Engineering and Technology, 2015
Author: Okologume Wilfred and Dulu Appah
An investigation of the efficacy of enhanced oil recovery by means of micro-organisms in Niger Delta ...
Journal: J. Pet. Gas Explor. Res., 2014
Author: - Ikporo Bibobra. and Okotie Sylvester.
Reservoir Management Practice, Key to Optimum recovery
Journal: Multi- Disciplinary Engineering journal of Research Development, 2008
Author: Akpoturi P.E and Otitigbe F
Estimation of Pressure Drop, Liquid Holdup and Flow Pattern in a Two Phase Vertical Flow
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Omon E., Dulu A. and Okotie S.
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
Office Noise Pollution in industrial and commercial premises in Nigeria
Journal: Nigerian journal of Industrial and Systems Studies (NJISS), 2005
Author: Akpoturi P E and J Ndukwe
A Multivariate linear Regression Theoretic Approach to Modelling Road Traffic Accidents in Nigeria.
Journal: Journal of the Nigeria Association of Mathematical Physics., 2016
Author: B.U. Oreko, S. Okiy, C.C. Nwobi-Okoye and A.C Igboanugo
Predicting Reservoir Behavior using Mathematical Models 2 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
Application of Electrical Resistivity Method in the Assessment of Ground Water Potentials for Sustat ...
Journal: Annals of Environmental Studies, 2016
Author: Onosemuode C, Ataikiru L. T, and Oghama E.O
Report on the Evaluation of Ugua J2 and J3 Reservoir Performance.
Journal: American Journal of Engineering and Applied Sciences, 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ovuema Augustina
Towards a Software Cost Reduction Model
Journal: Benin Journal of Advances in Computer Science, 2018
Author: Oyemade, D. A, Onibere, E. A.
NUMERICAL MODELLING OF CURRENT ON WAVE DRIFT LOAD OF A SHIP SHAPED OFFSHORE STRUCTURES (CASE STUDY - ...
Journal: IJRDO-Journal of Mechanical And Civil Engineering, 2017
Author: Abam, Tamunopekere Joshua, Agbakwuru, Jasper Ahamefulal, Adeyemi, I. Olabisi
THE SECURITY PROVIDER... Social Responsibility and Customer Satisfaction
Journal: Security, 2020
Author: Onakpoma Oboroghenerukohwo
International Journal of Engineering Research in Africa
Journal: International Journal of Engineering Research in Africa, 2010
Author: Editor-in-Chief: Dr. A.O.A. Ibhadode JERA Managing Director: Dr. Stanislav Kolesnichenko
Effect of Turning Parameters on Metal Removal and Tool Wear Rates of AISI 1018 Low Carbon Steel.
Journal: Nigerian Journal of Technology,, 2016
Author: Mgbemena, C.O., Mgbemena, C.E., Ashiedu, F.I. Etebenumeh, G. O.
Advances in materials and systems technologies II
Journal: Advanced materials research, , 2009
Author: A O Ibhadode I A Igbafe B U Anyata
Assessing the adoption and use of integrated library systems (ILS) for library service provision in ...
Journal: Library Review, 2016
Author: Saturday U. Omeluzor and Gloria O. Oyovwe-Tinuoye
Immunization Model for Ebola Virus in Rural Sierra-Leone
Journal: IEEE African Journal of Computing ICT, 2015
Author: Ojugo, A. A., Allenotor, D., Oyemade, D. A., Yoro, R. E., Anujeonye, C. N.
Justification for Oil Well Stimulation
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Okotie Sylvester, Ubani C. E., Ikporo Bibobra
Effect of cutting fluids on tool wear during turning operations
Journal: Technical Transactions of the Nigerian Society of Engineers, 1999
Author: MUSA, M. and IBHADODE, A.O.A
Optimizing the Output Current for a DC-DC Converter
Journal: Journal of Control Theory and Informatics, International Institute for Science, Technology and Education, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles and Onyan Aaron Okiemute
Picosecond laser surface micro-texturing for the modification of aerodynamic and dust distribution c ...
Journal: Cogent Engineering , 2016
Author: Omonigho B. Otanocha, Li Lin, Yuanye Zhou, Shan Zhong Liu Zhu
Finite Element Analysis and Design Validation of High Pressure Gate Valve for a Typical Nigerian Oi ...
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: ThankGod E. Boye, Thaddeus C. Nwaoha and Adeyemi I. Olabisi
Manufacture of metal-arc welding electrodes from locally available materials
Journal: Journal of the Nigerian Institution of Production Engineer, 1993
Author: OKOH, I.G. and IBHADODE, A.O.A
Hydrogeological Studies for Groundwater resource and its vulnerability to contamination in Owo, Sout ...
Journal: International Journal of Science and Research (IJSR), 2015
Author: Falowo, O.O, and Imeokparia, E.G
Towards a Unified University Information System: Bridging the Gap of Data Interoperability
Journal: American Journal of Software Engineering, 2014
Author: Orobor Anderson Ise
The Design of a Linear Quadratic Optimal Regulator for Transient Heat flow in Continuous Casting of ...
Journal: International Journal of Current Research, 2016
Author: Obinabo E. C. Izelu C. O. Nwaoha T. C. and Ashiedu F. I.
Hydrocarbon Degradation Potentials of Indigeneous Fungal Isolates from a Petroleum Hydrocarbon Conta ...
Journal: Global Advanced Research Journal of Environmental Science and Toxicology, 2014
Author: Iheanacho, C. C., Okerentugba, P. O., Orji, F. A. and Ataikiru, T. L.
Preliminary Study on Antimicrobial Activity of Friendly Bacteria Isolated from Dairy Products
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2015
Author: Okorhi-Damisa, F. B. and Ataikiru, T. L.
Fuzzy Based System for Power Consumption Prediction
Journal: Journal of Engineering Science and Computing, , 2017
Author: EMAGBETERE, Eyere, BOYE, E. ThankGod, OGHENEVWAIRE, S. Iyabo