PUBLICATIONS
geochemical and isotopic evidence for crystal melt fluid phase equilibra and late stage fluid rock ...
Journal: African Journal of Science and technology, , 1992
Author: Imeokparia, E.G.
The Use of Geoinformatics Techniques in Site Selection for solid Waste Dump A Case Study of Warri an ...
Journal: International Journal of Science and Research (IJSR), 2017
Author: Christopher Onosemuode and Omorogbe Osemwegie
Artificial neural network model for cost optimization in a dual-source multi-destination outbound sy ...
Journal: PRODUCTION MANUFACTURING, 2018
Author: Modestus O. Okwu, Benjamin Ufuoma Oreko, Stanley Okiy, Austin C. Uzorh and Onyewuchi Oguoma
Predicting Diffusion Dynamics Of The Coronavirus In Nigeria Through Ties-Strength Threshold On A Cas ...
Journal: Technology Reports of Kansai University, 2020
Author: . Ojugo, A. A., Oyemade, D. A.
ENTROPY GENERATION IN COMBINED HEAT AND MASS TRANSFER EFFECT ON MHD FREE CONVECTION FLOW PAST AN OSC ...
Journal: Journal of Mathematics and Science (JMS) , 2015
Author: OKEDOYE A. M
Towards a Software Cost Reduction Model
Journal: Benin Journal of Advances in Computer Science, 2018
Author: Oyemade, D. A, Onibere, E. A.
Effects of Sodium Hydroxide Concentration on the Physical Properties of Zeolite Produced from Local ...
Journal: European Journal of Scientific Research, 2011
Author: Oghenejoboh, K. M. and Ohimor, E. O.
Seismic Refraction Data Analyses: A Software for Low Velocity Layer Interpretation in the Niger Delt ...
Journal: Petroleum Technology Development Journal, 2017
Author: G. I. Alaminiokuma and T. Warmate
Characterization and Creep Behaviour of Polypropylene/Calcium Carbonate Nanocomposites.
Journal: Journal of Applied Sciences Research, , 2010
Author: Mgbemena, C.O., Mgbemena, C.E., Ubani, N.O.
Simulation and experimental verification of completely closed cavity die forging on a mechanical pre ...
Journal: Proc. Institution of Mechanical Engineers, 1989
Author: IBHADODE, A.O.A. and DEAN, T.A
A Property Oriented Pandemic Surviving Trading Model
Journal: International Journal of Advanced Trends in Computer Science and Engineering, 2020
Author: Oyemade, D. A., Ojugo, A. A.
Tourist Sites in Delta State, Nigeria
Journal: Achieving Millennium Development Goals Through Mapping, David A. Musa and W.D.C Wokoma (ed), 2007
Author: Onosemuode, C .
Hydrological Analysis of Onitsha North East Drainage Basin Using Geoinformatic Techniques.
Journal: World Applied Sciences Journal , 2010
Author: Onosemuode C. Adetimirin O. I and Aboderin S. O.
Numerical Investigation of Thermo-Mechanical Behaviour of Ball Grid Array Solder Joint at High Tempe ...
Journal: ADVANCED MATERIALS RESEARCH -ZUG-, 2012
Author: Amalu, E.H. / Ekere, N.N. / Bhatti, R.S. / Mallik, S. / Takyi, G. / Ibhadode, A.O.A.
Advances in materials and systems technologies III
Journal: Advanced materials research, 2012
Author: Prof. A.O. Akii Ibhadode
Manufacture of metal-arc welding electrodes from locally available materials
Journal: Journal of the Nigerian Institution of Production Engineer, 1993
Author: OKOH, I.G. and IBHADODE, A.O.A
An Optimized Parallel Hybrid Architecture for Cryptocurrency Mining
Journal: Computing, Information Systems, Development Informatics Allied Research Journal, 2021
Author: David Allenotor, David Ademola Oyemade
The Role of Solid Mineral Mapping for Sustainable Development in Nasarawa State
Journal: M.E Ufuah and R.O. Olomo [ed.] Cartography and GIS for Sustainable Solid Mineral Development in Nigeria. A Publication, 2005
Author: Onosemuode Christopher
The Physiochemical Effects of Leachates on Ground water within Okpuno-Egbu Umudim Dumpsite Nnewi, An ...
Journal: Daffodil International University Journal of Science and Technology, , 2013
Author: Momoh, S.O., Mgbemena, C.O., Agbadua, S.A, Matthew, D.O.
Assessment of the Social and Environmental Impacts of Keffi-Lafia Federal Highway.
Journal: International Journal of Physical Science. , 2011
Author: Onosemuode, C and Akwa, L
Assessment of Household Energy Utilized for Cooking in Ikeja, Lagos State, Nigeria.
Journal: Nigeria Journal of Technology, NIJOTECH., 2016
Author: E. Emagbetere, J. Odia and Oreko, B.U.
Design and Implementation of a Digital Thermometer with Clock
Journal: GLOBAL JOURNAL OF ENGINEERING RESEARCH, 2016
Author: Benjamin O. Akinloye, AARON O. ONYAN, Donaldson E. Oweibor
2014: Heavy Metal Contamination and Distribution in Soils around Pb-Zn mines of Abakaliki district, ...
Journal: Frontiers in Geosciences, 2014
Author: Onyeobi, T.U.S. and Imeokparia, E.G.,
Hydrocarbon Biodegradation and Antibiotic Sensitivity of Microorganisms isolated from an oil pollute ...
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2020
Author: Ataikiru T.L, Okorhi F.B and Onyegbunwa A.E
An investigation of the efficacy of enhanced oil recovery by means of micro-organisms in Niger Delta ...
Journal: J. Pet. Gas Explor. Res., 2014
Author: - Ikporo Bibobra. and Okotie Sylvester.
Effect of cutting fluids on tool wear during turning operations
Journal: Technical Transactions of the Nigerian Society of Engineers, 1999
Author: MUSA, M. and IBHADODE, A.O.A
Hydrocarbon Degradation Potentials of Indigeneous Fungal Isolates from a Petroleum Hydrocarbon Conta ...
Journal: Global Advanced Research Journal of Environmental Science and Toxicology, 2014
Author: Iheanacho, C. C., Okerentugba, P. O., Orji, F. A. and Ataikiru, T. L.
DEVELOPMENT OF ERASABLE WHITEBOARD MARKER INKS
Journal: Canadian International Journal of Science and Technology,, 2017
Author: Kindness Uyanga Paul Onaji Modestus O. Okwu.
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in Industry, Vol 33, Iss 1, Pp 11-17 (2011), 2011
Author: A. C. Igboanugo / A. O. A. Ibhadode / C. U. Atuanya
SYNTHESIS AND OPTICAL PROPERTIES OF SELF-ASSEMBLED COORDINATION POLYMER OF Zn(II) IONS WITH PHENYLMA ...
Journal: Ife Journal of Science, 2015
Author: Mbonu, J. I.
Performance Indicators for Sapele Thermal Power Station, Nigeria: 1997-2006
Journal: ADVANCED MATERIALS RESEARCH -ZUG-, 2012
Author: Obodeh, O. / Isaac, F.O. Contributors: Ibhadode, A. O. Akii
Thermal stability of pulverized palm kernel shell (PKS) based friction lining material locally deve ...
Journal: ChemXpress , 2014
Author: Mgbemena, C.O., Mgbemena, C.E. Okwu, M.O.
A Typified Greedy Dynamic Programming Model for the MetaTrader Platform
Journal: Journal of Advances in Mathematical and Computational Sciences, 2020
Author: Oyemade, D. A.
Design and Manufacture of a 30-ton Hydraulic Press
Journal: Mechanical Engineering Department, Federal University of Technology , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in industry, 2011
Author: C.U. ATUANYA, A.O.A. IBHADODE, A.C. IGBOANUGO
Justification for Oil Well Stimulation
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Okotie Sylvester, Ubani C. E., Ikporo Bibobra
Plant-mediated biosynthesis of silver nanoparticles by leaf extracts of Lasienthra africanum and a s ...
Journal: Bull Mat Sci, 2017
Author: Elias E. Elemike, Damian C.Onwudiwe, Arijeh Olayinka, Henry U.Nwankwo
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: INTERNATIONAL JOURNAL OF MACHINE TOOLS AND MANUFACTURE, 2004
Author: Amiolemhen, P. E. / Ibhadode, A. O.
The Use of Geoinformatics in Site Selection for Suitable Landfill for Poultry Waste: A Case Study of ...
Journal: International Journal of Sciences, 2016
Author: Onosemuode C. and Abodurin W.A
Evaluation of Pure Aluminium Inoculated with Varying Grain Sizes of an Agro-waste based Inoculant
Journal: Advances in Science, Technology and Engineering Systems Journal (ASTESJ), 2017
Author: Adeyemi I. Olabisi, Thankgod E. Boye, Emagbetere Eyere
Predicting Reservoir Behavior using Mathematical Models 1 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
Experimental Study of Induced Vibration and Work Surface Roughness in the Turning of 41Cr4 Alloy S ...
Journal: IJIRSET , 2013
Author: Eze S.C., Izelu, C.O., Oreko B.U., Edward B.A
A Quality of Service (QoS) Model for Forex Brokers Platforms
Journal: International Journal of Innovative Science, Engineering Technology, 2022
Author: Oyemade, D. A., Allenotor, D.
Optimisation of Alkaline Ethanolysis of Biodiesel Yield from Nigerian Coconut Oil using One Variable ...
Journal: Journal of Energy and Natural Resource Management, 2014
Author: Samuel O.D., Okwu M. O., Oreko U.O., Amosun S. T.
Modeling Work Task and the Bending Capabilities of Subjects
Journal: Journal of the Nigerian Association of Mathematical Physics , 2012
Author: Igboanugo, A. C. Ashiedu, F. and Onifade M. K.
Tool wear of some hacksaw blades
Journal: Journal of the Nigerian Institution of Production Engineers, 1994
Author: IBHADODE, A.O.A
Design of Maximum Power Point Tracker (MPPT) and Phase Locked Loop (PLL) in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Development of home made crucibles for traditional metal casting
Journal: Journal of the Nigerian Institution of Production Engineers, 1998
Author: IBHADODE, A.O.A.
Design of a PV-Connected DC-DC Converter
Journal: International Journal of Emerging trends in Engineering and Development, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Estimation of pressdie system stiffness in mechanical press forging
Journal: Journal of the Nigerian Institution of Production Engineers, 1994
Author: IBHADODE, A.O.A. and DEAN, T.A