PUBLICATIONS
Computer Aided Structural Analysis of Axle Tilting Effect on Tractor Front Axle Support.
Journal: Innovative Systems Design and Engineering,, 2014
Author: Aduloju, S.C., Mgbemena, C.O., Ebhota,W.S., Bolarinwa, G.O.
Evaluation of Pure Aluminium Inoculated with Varying Grain Sizes of an Agro-waste based Inoculant
Journal: Advances in Science, Technology and Engineering Systems Journal , 2017
Author: 2. Adeyemi I. Olabisi, ThankGod E. Boye, Emagbetere Eyere
Development of a New Flux for Aluminium Gas Welding
Journal: : Advanced Materials Research, 1994
Author: oseph I. Achebo, A.O. Akii Ibhadode
Man Power Prediction for Nigeria Liquefied Natural Gas Industry
Journal: Nigeria journal of Engineering Management, 2006
Author: Akpoturi P.E
Dynamics of Land use Change: A Case Study of Lafia, Nasarawa State, Nigeria
Journal: Geoinformatics Geostatistics: An Overview, 2017
Author: Onosemuode Christopher and Galadima Daniel Habila
The Capability of using GIS in Managing Environmental Problem in the Niger Delta
Journal: Journal of Empirical Research., 2006
Author: Onosemuode, C and Okhae, S.E.
ONLINE MONITORING OF SOFT SENSOR PERFORMANCE: A CASE STUDY OF CEMENT CLINKER QUALITY PARAMETERS SOFT ...
Journal: IJRET: International Journal of Research in Engineering and Technology, 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Utilization of Nigerian precious Resource in the Niger Delta Region for the benefit of the Ecosystem ...
Journal: International Journal of Engineering and Technology (IJET), 2014
Author: Okotie Sylvester and Ikporo Bibobra
DESIGN AND DEVELOPMENT OF A LOW-COST WASHING MACHINE SUITABLE FOR POLYTHENE MATERIALS
Journal: Asian Journal of Current Research, 2017
Author: EMAGBETERE EYERE, ADEYEMI I. OLABISI AND OGHENEKOWHO P. ARUOTURE1
APPLICATION OF CASSAVA PEELS ACTIVATED CARBON IN THE TREATMENT OF OIL REFINERY WASTEWATER A COMPARA ...
Journal: Journal of Ecological Engineering, 2016
Author: Kigho Moses Oghenejoboh, Smith Orode Otuagoma, Evuensiri Onogwharite Ohimor
Report on the Evaluation of Ugua J2 and J3 Reservoir Performance.
Journal: American Journal of Engineering and Applied Sciences, 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ovuema Augustina
The Instrumentality of Manufacturing in Translating Poverty to Prosperity
Journal: Inaugural Lecture Series, 2006
Author: Ibhadode, A.O.A.
Advances in materials and systems technologies III
Journal: Advanced materials research, 2012
Author: Prof. A.O. Akii Ibhadode
Estimation of pressdie system stiffness in mechanical press forging
Journal: Journal of the Nigerian Institution of Production Engineers, 1994
Author: IBHADODE, A.O.A. and DEAN, T.A
Enhancing Hydrocarbon recovery using local Alkaline in Niger Delta Reservoir
Journal: Nigerian journal of technology (NIJOTECH), 2017
Author: Akpoturi. P .E and Ofesi S.F
Organophosphate pesticides in herbal mixtures from Bayelsa State, Nigeria: implication for human exp ...
Journal: Journal of Environmental Exposure Assessment, 2025
Author: Tesi, G.O., Lari, B., Ogbuta, A.A., Felagha, I., Obodoka, G.C., Ogbomade, W.E., Okpara, K.E., Osioma, E. and Agbozu, I.E
Application of Linear Programming Model and Sensitivity Analysis in Multi Source Multi Destination S ...
Journal: Canadian International Journal of Science and Technology, Ontario Canada, 2017
Author: M. O.Okwu, F.I Ashiedu, Joachim Gidiagba, and A. Adedoyin
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in industry, 2011
Author: C.U. ATUANYA, A.O.A. IBHADODE, A.C. IGBOANUGO
Risering of a Four-Cavity Die Production Mould by Convectional Method
Journal: Advanced Materials Research, 1994
Author: Prof. A.O. Akii Ibhadode, A.I. Igbafe and B.U. Anyata
Anti-pseudomonas activity of organic acids produced by lactic acid bacteria
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2014
Author: Beatrice Folawe Okorhi
Determination of Optimum Manufacturing Conditions for Asbestos-free Brake Pad using Taguchi Method
Journal: Nigerian Journal of Engineering Research and Development, 2006
Author: Dagwa, Ishaya - Ibhadode, A.O.Akii
Modeling and Optimization of Hard Turning Operations on 41Cr4 Alloy Steel using Response Surface Met ...
Journal: International Journal of Mechanical Engineering and Applications (IJMEA), 2016
Author: Izelu C. O., Ezeh S. C. and Ashiedu F. I.
Assessment of organophosphate pesticides in soils and vegetables from agricultural areas of Delta Ce ...
Journal: Scientific Reports , 2025
Author: Tesi, G.O., Okpara, K.E., Tesi, J.N., Agbozu, I.E. and Techato, K.
Introduction to Manufacturing Technology
Journal: Open Journal of Energy Efficiency, 2013
Author: Mala Abba-Aji, Vincent Ogwagwu, Bukar Umar Musa, Prof. A.O. Akii Ibhadode (Contributor)
The Effect of Billet Location on Completely Closed Cavity Die Forging
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
Modeling to Support using Crouch Technique to Lift Low-Lying Objects
Journal: Journal of the Nigerian Association of Mathematical Physics , 2012
Author: Igboanugo, A. C. Ashiedu, F. And Onifade M. K.
Design and Development of a Petrol-powered Hammer mill for rural Nigerian Farmers
Journal: Journal of Energy Technologies and Policy, 2014
Author: Adekomaya, S.O., Samuel, O.D
Fuzzy Based System for Power Consumption Prediction
Journal: Journal of Engineering Science and Computing, , 2017
Author: EMAGBETERE, Eyere, BOYE, E. ThankGod, OGHENEVWAIRE, S. Iyabo
Adsorption and desorption performances of Eichhornia crassipes (water hyacinth) roots and leaves pow ...
Journal: Ovidius University Annals of Chemistry, 2025
Author: Tesi, G.O., Ejeromedoghene, O., Alli, Y.A., Okunoja, H.B. and Ipeaiyeda, A.R.
Identification and Morphology of pathogens in liquid effluent from a biodigester with cow dung feed ...
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2020
Author: Ogunkeyede A.O, Okorhi-Damisa B.F, Tedjere E, and Adeniyi S.
A Method for Stimulation Candidate Well Selection
Journal: International Journal of Engineering and Technology, 2015
Author: undefined!
Microbial community structure of an oil polluted site in Effurun, Nigeria
Journal: International Research Journal of Public and Environmental Health, 2017
Author: Tega L. Ataikiru1,Beatrice F. Okorhi-Damisa1 and Jemeelah I. Akpaiboh1
geochemical and isotopic evidence for crystal melt fluid phase equilibra and late stage fluid rock ...
Journal: African Journal of Science and technology, , 1992
Author: Imeokparia, E.G.
Adjustment to Oil Saturation Estimate Due to Various Reservoir Drive Mechanisms
Journal: International Journal of Advanced Petroleum Engineering and Technology, 2014
Author: Okotie Sylvester and Ikporo Bibobra
A Comparative Study of Regression Analysis and Artificial Neural Network Methods for Medium-Term Loa ...
Journal: Indian Journal of Science and Technology, 2017
Author: Isaac A. Samuel Adetiba Emmanuel Ishioma A. Odigwe and Firstlady C. Felly-Njoku
Science and Technology - A Vehicle for Sustainable Development in Nigeria
Journal: journal of Engineering Management, 2002
Author: Akpoturi .P.E
Porosity-Permeability Regimes in Reservoirs for Hydrocarbon Prospectivity in Nembe Creek Field, Nige ...
Journal: Journal of Applied Geology and Geophysics, 2017
Author: G. I. Alaminiokuma and W. N. Ofuyah
Determination of Optimum Welding Flux Composition Using the Bend Strength Test Technique
Journal: Advanced Materials Research , 1994
Author: Joseph I. Achebo, A.O. Akii Ibhadod
Development of a Computer-Aided Application for Analyzing ECG Signals and Detection of Cardiac Arrh ...
Journal: International Journal of Applied Information Systems , 2015
Author: Oludare Y Ogundepo and Akinlolu A Ponnle
A Financial Option Model for Pricing Cloud Computational Resources Based on Cloud Trace Characteriza ...
Journal: IEEE African Journal of Computing ICT, 2015
Author: Allenotor, D., Oyemade, D., Ojugo, A.
Carbon Nanotubes: The Building Blocks of Nanotechnology Development
Journal: J.Nanotech. Prog. Int. , 2016
Author: Boye E. T., Achadu J.O., Oreko B.U., Samuel O.D.
A new approach for the design of feedback control systems by the Bode Method
Journal: ournal of Electrical a nd Electronic Engineering ,, 1999
Author: IBHADODE, A.O.A.
Static Analysis of Tyre Model Developed from Natural Rubber Vulcanizates.
Journal: Lecture Notes in Computer Science, 2016
Author: Mgbemena, C.O., Mgbemena, C.E., Ashiedu, F.I. Menon, A.R.R. Oral Paper presented at The 2016 International Conference
Software for Reservoir Performance Prediction
Journal: Onepetrol Journal, 2015
Author: Okotie, Sylvester. and Onyekonwu Mike
Optimal transesterification duration for biodiesel produced from waste frying oil
Journal: British Journal of Renewable Energy,, 2015
Author: Samuel, O.D., Amosun, S.T. and Boye, T.E.
Development of an Electric induction furnace for heat treatment of ferrous and non-ferrous alloys,
Journal: American Journal of Engineering Research,, 2015
Author: Anaidhuno, U.P Mgbemena, C.O
Some physical and mechanical properties of asbestosfree experimental brake pad
Journal: JOURNAL OF RAW MATERIALS RESEARCH , 2006
Author: I M. Dagwa, A. O. A. Ibhadode
Simulation and experimental verification of completely closed cavity die forging on a mechanical pre ...
Journal: Proc. Institution of Mechanical Engineers, 1989
Author: IBHADODE, A.O.A. and DEAN, T.A
Manufacture of metal-arc welding electrodes from locally available materials
Journal: Journal of the Nigerian Institution of Production Engineer, 1993
Author: OKOH, I.G. and IBHADODE, A.O.A